Jump to content
SAU Community

Recommended Posts

Import feast on the way hm yesterday...

White/Pearl...4door r33 got on the gas to pass me down the expressway just before the turn off to Pt Wakefield.

A sweet looking metallic blue Stag, on Salisbury Hwy at Mawson Lakes intersection. Through a nod ya way but was a tad late.

And a White Stag parked at the Izabeff Centere with a Sau sticker on the rear window...

All in all nice drive hm :)

Edited by Bildo R33 GTS T

hey everyone spotted atleast one person today the bloke who has the little 323 that was at collingrove at the round about near the paralowie shops and also a white series2 33 behind me same area at about 8am this morning :merli:

Paul.

spotted what im guessing is joeyy at D & C carcraft today getting a stocker turbo chucked back on, bad luck with the defect

yeah mate that would of been my car . You might see it back there in afew weeks getting it all back on lol

Drove into the RAAF base behind a nice white Stag this morning - had a bit of a chat with the owner, nice to see some Jap presence out there with Pete's old GTR there as well. And on my way through Aberfoyle Park earlier saw another white Stag with gold rims - exchanged waves as we drove past..... didn't recognize the car though.

spotted a nice 4door 34 with the plates raw-034, sturt road/diagonal road intersection, at about 12.30pm.

blueish green 33 with what looks like dished starcorps with flush fitment at big bucket south road, with a 33 4 door with drift r rims when i got the car cleaned at about 3.15pm.

maroon 33 with tri spoke rims going up main south road hill at about 4.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...