Jump to content
SAU Community

Recommended Posts

Spotted 'dare ya' going thru coromandel valley this arvo at 3.40, gives a thumbs up, i was on the harley

and spotted RSV-004 coming out of a street on blacks road shortly after.

last night at elizabeth shops at about 8.30 or so, i seen a r34 gtr, dark blue in colour, seen a blue 32 with the plates being 'sxy 032' i think.! and alos another blue r34..

i think they were all blue, it was dark so i didnt see properly, ha

Spotted the DOHMAR beast out the front of its owner's place around 3pm this arvo - what were you doing home from work you slacker? I gave a few beeps as I flew past - not sure if you would have heard me or not .... reminds me I need to get and fit some triple air horns to the 35 :D

last night at elizabeth shops at about 8.30 or so, i seen a r34 gtr, dark blue in colour, seen a blue 32 with the plates being 'sxy 032' i think.! and alos another blue r34..

i think they were all blue, it was dark so i didnt see properly, ha

dammit i missed the blue crew cruise

- club theme song
Heslo before rolling past bp golden grove, car looks tough dude wouldn't mind having a closer look :ninja:

Ah that was you I waved to?!!? Just coming back from track day and was grabbing a bite to eat

Spotted the DOHMAR beast out the front of its owner's place around 3pm this arvo - what were you doing home from work you slacker? I gave a few beeps as I flew past - not sure if you would have heard me or not .... reminds me I need to get and fit some triple air horns to the 35 :ninja:

nah didnt hear ya. had an RDO planned cause Im most likely working next weekend on a server migration

i too need horns, mines f**ked. horn button and relay tested out ok so I want something LOUD cause I only ever use my horn in anger

triple air horns you say? got url? what u doing after work this week? would love to test ur ipod transmitter

-D

ah i remember someone waving from a motorbike lol!! I was a bit confused at the time... :ninja:

Spotted 'dare ya' going thru coromandel valley this arvo at 3.40, gives a thumbs up, i was on the harley

and spotted RSV-004 coming out of a street on blacks road shortly after.

Spotted the DOHMAR beast out the front of its owner's place around 3pm this arvo - what were you doing home from work you slacker? I gave a few beeps as I flew past - not sure if you would have heard me or not .... reminds me I need to get and fit some triple air horns to the 35 :ninja:
nah didnt hear ya. had an RDO planned cause Im most likely working next weekend on a server migration

i too need horns, mines f**ked. horn button and relay tested out ok so I want something LOUD cause I only ever use my horn in anger

triple air horns you say? got url? what u doing after work this week? would love to test ur ipod transmitter

-D

re: bold - dont we all

re: ebay link FIGHT FIGHT FIGHT

ad_fight.jpg

stebel_3_tone3.jpg<<Click

oh you live actually on elizebeth road? i live just off it near the xpressway.. thats why im always around the area lol

nah wouldnt be mine up seaford parked, i wouldnt park it anywhere on south road down south for the fear of it not being there for that long :ninja:

thanks bud, like you mentioned it is standard height and well fairly stock but that will all change in the future.

Yeah i live on elizabeth, just down from ya near the iga. Thats the first time ive seen you drive past, weird.

Keep seeing a white 33 with white starcorp impuls either in the maccas junkfood corner or just around from my place, very noice looking :P

Also stolen-gtr, whats Simon driving these days do you know? (the guy you baught the 33 from) (guessing you baught the car from him LOL)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...