Jump to content
SAU Community

Recommended Posts

There is not a great deal you can do without besides the ABS, air conditioning etc its more about saving weight.

Besides the obvious, you can strip the loom and rewire with the bare essentials. you'd be suprised how much wiring is unused once you remove the HICAS, ABS etc.

Single turbo conversions are lighter than typical twins.

Stick with alloy piping if possible.

Carbon canisters can be removed as well as the piping

Heater hoses and other water lines if you have stripped the inside out

Washer bottle and hoses.

Smaller battery

You can pretty much take anything out thats not needed if your building a circuit car.

Guys,

when removing the carbon canister do you just block the outlets or do they need to be reconnected somewhere

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

concept. will await this reply!!

and would like to know about the carbon canister too. mines floating around somewhere in my engine bay hardly attached to anything

I don't get the rush for the c/f tailshaft unless you have too much money to spend.

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

Because I just want to be able to say to girls:

"Yes that's right ladies......... I have a carbon shaft. Form an orderly line to the left, and no pushing."

either way its still weight i want to get rid of as thats my main goal for now.

and on the plus side, single piece shaft rather than the current.

and barron, a light weight clutch/flywheel would be somewhere 5x (+++) the cost of the shaft correct?

No Angus i just put a 4.2 kg alloy flywheel on for 500$

http://www.vividracing.com/catalog/acpt-ca...r32-p-9406.html

Is there anywhere in australia that makes them? Or just US shops? I'd like one, but I doubt they're off the shelf items for my car.

hey, since my car has a r34 gearbox in a r32 i need an odd sized one also.

so get your length of your shaft right and i can forward on to him if your interested. as i've told him i need an odd sized one too.

$1400 !

Thats very good.

People spend more than that on making thier GTR look faggy.

A carbon tailshaft is well worth the money. Manufacturers are using them now on fairly cheap sports cars for the range of benifits they offer.

I've got this on my list of mods for my R32 GTR bunky and I'm only building a 300rwkw car.

any chance one of you guys know how much a bare and empty r32 gtr fuel tank weighs ?

Titanium exhaust = 23 ks

but surely you can get lighter exhausts? i've got a 3" zorst that weighs 12kgs ( not inlcuding cat, front pipe, dump pipe)

Edited by Dan_J
he was saying 23kgs is the amount of weight saved. most titanium systems would be under 6kg.

oh ok thanks for clearing that up

at a guess i would say a bare gtr fuel tank is 12 to 14 kg.

you wouldnt have a spare one that u cud just wack on sum scales to double check? :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...