Jump to content
SAU Community

Recommended Posts

hey i have an r33 gtst skyline i seem to have problems with it.

when i start the car when its cold the engine feels tip top.

when i drive for a while and the engine satrts to heat up a bit it feels like the car wants to stall and has an idle problem.

when i turn the car on when its hot it takes a little bit to find its idle...

it goes from 100 to 1000 in reving and sometimes stalls when i try.

also when i rev my car a little it sounds like there is a rattle where the timing belt is.

it kicks in at about 1000 and cuts out a little later.

things i have replaced.

oxy sensor

tps

engine and turbo

mods i have

hks airpod filter

carbon battery.

i have video of it

also my throttle cable feels lose as you can see in the video.

$15 will be rewarded with correct awnser for both things that need fixing.

i will slowly replace items once i know whats going on.

on thursday my car will get dignostics done.

i only ask this because everywhere i go machanics are like agrrrr this is the problem but its not really agrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

thanks alex

I've got some money on the AAC valve, or the Cold Start Air Valve (underside of the inlet manifold). But if you've replaced the whole engine, then those would have been replaced.

  • 11 months later...
Yeah sounds like your AAC is stuck open or the regulator is faulty
Pull the plug on and off to see if theres a drop/increase in revs.

What if there is a drop or increase in revs? Which is supposed to happen?

Edited by Neejay
  • 1 month later...
<br />hey i have an r33 gtst skyline i seem to have problems with it.<br />when i start the car when its cold the engine feels tip top.<br />when i drive for a while and the engine satrts to heat up a bit it feels like the car wants to stall and has an idle problem.<br />when i turn the car on when its hot it takes a little bit to find its idle...<br />it goes from 100 to 1000 in reving and sometimes stalls when i try.<br /><br /><br />also when i rev my car a little it sounds like there is a rattle where the timing belt is.<br />it kicks in at about 1000 and cuts out a little later.<br /><br />things i have replaced.<br />oxy sensor<br />tps<br />engine and turbo<br /><br />mods i have <br />hks airpod filter <br />carbon battery.<br /><br /><br />i have video of it<br /><br />also my throttle cable feels lose as you can see in the video.<br />$15 will be rewarded with correct awnser for both things that need fixing.<br />i will slowly replace items once i know whats going on.<br />on thursday my car will get dignostics done.<br />i only ask this because everywhere i go machanics are like agrrrr this is the problem but its not really agrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr<br />thanks alex<br />
<br /><br /><br

wow, we are in pretty similar situations, Ive done a rebuild, done the turbo and only got a pod filter. Yeah only rebuild the long block, so kinda sems like they gave me back this amazing engine block surrouned by sh*tty parts lol. my idle used to be all over the place, so i began replacing parts. i replaced the IAC valve,then eventually the whole unit, got new tps, got it re positioned, got a new throttle body and cleaned the unit out. That worked for my idle issues, never stalled or hunted around much again, only rarely. I'd also check for any vacuum leaks or cracked hoses, ask ur mech to do a compression test. rebuilt engines have so much power when everything around them is running right. also for your rattle, I'd suggest u check that all the bolts up font are tightened. Good luck wit it

Ben

  • 9 months later...

Ben, I am currently having problems very similar to this and you said you replaced your IACV Valve and i have ben told thats what i need to do but i am having a lot of trouble finding out where to get one, Nissan don't want to sell me the valve alone they want me to buy the entire unit and that is around $1k for something i dont need, could you tell me where you got your new/used one from please? I have a 1996 R33 series II.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...