Jump to content
SAU Community

T88-34d With Rb26? Much Lagier Than T04z?

GreeceS13

By GreeceS13,
in Engines & Forced Induction

 Share

Recommended Posts

GreeceS13 Rising Star

GreeceS13

Posted
Posted

I love whatever I have read for the T04Z! But I cannot find any bargain to buy one.. I find a good bargain for T88-34D!!

You can read my setup in my signature!

My target is 440rwkw

I have read that T04Z is very fast spool.... t88-34D will be much lagier? How much rpm more for full boost?

Will be ok an rpm limit 8.000 or 8.500 ?

Lithium Grand Master

Lithium

Posted
Posted
I have read that T04Z is very fast spool.... t88-34D will be much lagier? How much rpm more for full boost?

Will be ok an rpm limit 8.000 or 8.500 ?

They're both rather laggy, but the T88 is VERY laggy. You get that with a bigger turbo which is only plain bearing, and its also overkill for 440kw @ wheels.

Blitz Grand Master

Blitz

Posted
Posted
I love whatever I have read for the T04Z! But I cannot find any bargain to buy one.. I find a good bargain for T88-34D!!

You can read my setup in my signature!

My target is 440rwkw

I have read that T04Z is very fast spool.... t88-34D will be much lagier? How much rpm more for full boost?

Will be ok an rpm limit 8.000 or 8.500 ?

If you want cheap, pickup a Garrett T04Z, not a T88

Wheezy Mentor

Wheezy

Posted
Posted
They're both rather laggy, but the T88 is VERY laggy. You get that with a bigger turbo which is only plain bearing, and its also overkill for 440kw @ wheels.

If it was old tek 70's style garrett then I would agree.

If you had a turbo with similar trim / ar measurements then there is bollocks all in it between a BB and Plain bearing....despite what the skeptics say.

den001 Proficient

den001

Posted
Posted

what about a innovative turbo systems gt80 on a 30/26 wiv 272 10.2lift cams???

all i know its a 1.0 rear with a xtrim wheel, and its got a 80mm front wheel..

me in same boat, but have no idea when it will be on hard

Lithium Grand Master

Lithium

Posted
Posted
If it was old tek 70's style garrett then I would agree.

If you had a turbo with similar trim / ar measurements then there is bollocks all in it between a BB and Plain bearing....despite what the skeptics say.

Given its essentially a TD08 which is an old Mitsubishi truck turbo, it fits into the same umbrella in my opinion. Even a modern Borg Warner S372 (rough equivalent to T88-34D) will be laggier than a T04Z though. Its still plain bearing, and its still bigger.

PM-R33 Grand Master

PM-R33

Posted
Posted
I love whatever I have read for the T04Z! But I cannot find any bargain to buy one..

http://www.horsepowerinabox.com/HPIAB2/category12_3.htm

Thats a decent price and if you look a bit harder im sure you can find them for around $2200

My target is 440rwkw

Overkill for a T88 in that case then.

I have read that T04Z is very fast spool....

Lol ummm no.

t88-34D will be much lagier?

Yes quite a bit laggier, expect power to come on around 5500-6000rpm (talking like 150-200rwkw) and make peak power between 7500-8000rpm

Will be ok an rpm limit 8.000 or 8.500 ?

Yes it will be fine for both turbos however id suggest anything over a T88, IMO a T88 is only good for a drag car/dyno queen/posers for the street. What's the car going to be used for?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • Murray_Calavera
      iPad gauge cluster

      By Murray_Calavera · Posted

      First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...