Jump to content
SAU Community

Recommended Posts

hey people iv got a bonnet lying around and i no a guy in town who does air brushing just wondering if any one got any good ideas for the bonnet thinking of selling it after its dun :/

What colour is the bonnet ?

a naked jap girl scene or image of an RB25 with all the trimings.... geez the list ideas could be endless

a samurai fighting an rb

a manga character

ooh ooh the chick from Ghost in the shell

an alien symbol

give the bonnet that smashed up look

a generaic tribal graphic then get vinyls on the side to match

a sword through an RB

nismo logo surrounded by lightning

someone else have a go, its fun...

well i just fin respraying my car blue it was silver but i put a cf bonnet and i got the old one in primer ready to paint any colour i want also got 18 inch rims im bying in maypost-43842-1205049689_thumb.jpg

Stop showing me pictures of Blue coloured 34's... i'm getting jealous :D

A friend of mine is taking a birds eye view of his RB26/30 then having it look like the bonnet is torn open and can see the motor inside.

You could copy this if you like but be prepared for a Bill and a half.

hahah

ive got a killer idea.

get a 2JZ airbrushed on the bonnet... bwahahahaha like, so when people look at it, its like, the top view of one....

bwahahaha.

seriously tho, airbrushings a waste of time, just palm it off to some one if you dont airbrusgh teh 2jz on it.

iv been trying to sell this bonnet for months its dead straight in primer i can paint it any colour im a spray painter i thort if i got air brushing on it it would sell i just wanted sum ideas so i could get him to do sumthin on it to try get rid of it

why don't you put in the advertisement that the buyer can get anything airbrushed onto the bonnet for no extra cost? then they can choose

or even for an extra $50 or something n just buy the guy doing the airbrushing a carton. aahhhhh the things you can get done for a carton :D

I'm loving the see through bonnet idea, but the cops can defect you without even popping the bonnet... Unless you air brush a RB26 onto the bonnet of a stock NA, like mine *cough cough*. That would be a ricer's wet dream!!

Or get "i wish i was a..." at the top of the bonnet then the rb26 airbrush.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...