Jump to content
SAU Community

Stagea Intercooler

MRO

By MRO,
in Four Door Family & Wagoneers

 Share

Recommended Posts

MRO Community Regular

MRO

Posted
Posted

I am thinking about getting one of the new stealth cooling pro intercooler from Just Jap - see link below

http://www.skylinesaustralia.com/forums/Co...94#entry3707494

They use the factory cooler pipes on a r33. Does anyone know/think they would match up to the Stagea factory pipes? If so it looks like an easy install!

Link to comment
https://www.sau.com.au/forums/topic/209747-stagea-intercooler/
Share on other sites
chook Mentor

chook

Posted
Posted

i installed an R33 ARC FMIC, slightly shorter than these, bolted up to factory pipes, might just have to modify the mounting points slightly and do a bit of hacking on the front inner metal bar. But with enough skill and patience anything can be made to fit.

Xmetal Mentor

Xmetal

Posted
Posted

I don't see why it wouldn't fit because the pipes suggest that it would fit up really easily.

I'd much rather try and get this kit to work rather than their other kit which involves drilling a hole in the chassis.

MRO Community Regular

MRO

Posted
  • Author
Posted
Exactly what ive been looking for, thanks for putting it up. Ive ordered one, will let you know if theres any problems but i doubt it, its all in the same place.

cheers.

Good work Momo. I think it will bolt straight up but now you will be able to tell us all.

chuckie Mentor

chuckie

Posted
Posted
Good work Momo. I think it will bolt straight up but now you will be able to tell us all.

Morgan you will have to do some mod`s to reo bar i hav just had dumie fit of blitz & had to mod reo so good luck dude.cheer`post-36964-1205209662_thumb.jpgs chuckie.post-36964-1205209578_thumb.jpgpost-36964-1205209732_thumb.jpgpost-36964-1205209804_thumb.jpgcooler size is 360x820x70.

Tangles Grand Master

Tangles

Posted
Posted

they look good

look to be exact same size to my Apexi cooler, exact same shape etc except mine is HALF tube'n'fin and HALF bar'n'plate

Id be getting one of these intercoolers, if you want to use the same factory holes

you'll need a couple of stainless pipes tho to go from inside engine bay to the intercooler, I used a pipe kit off ebay

edit: I didnt hack anaything, bar the plastic Dayz front bar numberplate bracket (to open it up to let max air flow thru). if you install the 'cooler on a slight angle it fits without touching the reo bar

MRO Community Regular

MRO

Posted
  • Author
Posted (edited)

Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

Edited by MRO
Tangles Grand Master

Tangles

Posted
Posted
Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

oh I thought they didnt come with pipes.

nice buy if they do, thats for sure.

um, photos, none here at work

there are intercooler threads on here where Ive posted pics

just cut the dayz number plate section off (poorly cut, mind you) and bolted the number plate to the side air dam where the side mount used to be.

definately does not weaken the front area

Id like to get a small sticker number plate eventually.

DCAM0010-1.jpg

DCAM0014.jpg

DCAM0010.jpg

mike40sydney Experienced

mike40sydney

Posted
Posted
Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

i mounted my plate on the bar itself just above the original holes

post-26949-1205220932_thumb.jpg

RubyRS4 Grand Master

RubyRS4

Posted
Posted
just cut the dayz number plate section off (poorly cut, mind you) and bolted the number plate to the side air dam where the side mount used to be.

definately does not weaken the front area

Tangles, where in Adelaide are you?

I'd like to have a look at your intercooler install if you don't mind.

I've got a front mount kit coming for my RS4.

:blink:

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...