Jump to content
SAU Community

Recommended Posts

Better match for the 3L IMO.

Better match for the 3litre than what options? I'm not solid on the HKS equivalents for those power levels these days, reckon there are lots of good units out there. One of the cooler new beasties to hit the market I reckon is the Forced Performance GT3794HTA... though if you want something physically big and aren't shy to pay the bling (as buying the HKS T51R would imply) I'd really look at the new Garrett GTX4294Rs. How awesome would that be? ;)

Looking for something around the 800hp mark with a bit of response.

Looked at so far:

HKS T51R KAI

Turbonetics Hurricane (Benita) BB

Precision PT6765SP Billet BB

There is a fairly big price difference between the HKS turbo and the other two. But the T51R has the turbo whine that im after. ;)

Looked at so far:

HKS T51R KAI

Turbonetics Hurricane (Benita) BB

Precision PT6765SP Billet BB

There is a fairly big price difference between the HKS turbo and the other two. But the T51R has the turbo whine that im after. :P

Turbine whine is easy to sort out, just get anything which a decent antisurge setup ;) The GT3794HTA and the Garrett GTX4294HTA both have antisurge housings but are actually a little quiet probably due to the compressor design, PT6765 are also pretty quiet and the 3794HTA make more power - fwiw.

Borg Warner S300SX 91/79 could be fun as well - the Borgs are cheap and pretty tough and rowdy :banana:

http://www.mkivsupra.net/vbb/showthread.php?t=202668

http://www.full-race.com/catalog/product_i...666ef2968f3d4b1

The BW 366XL looks the goods but they are only oil cooled and journal bearing.

Do they make water cooled BB?

I wouldn't get too wound up about ball bearing vs plain bearing, there are quite a few journal bearing turbo combinations out there which give the BB Garretts a run for their money.... pay attention to the reliability/performance/owners comments of turbo combinations instead of what the marketing say. In terms of non-water cooling, what are you intending on using it for?

A bit of everything really. Powerful enough to put down a decent time but responsive enough to give the circuit ago.

This Supra seems to be fairly responsive with 760hp. And a circuit car too.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...