Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm thinking about putting a pod filter in the stock air box. what are u guys reckon? is this gonna be better than pod filter with custom air box? also, think about getting air induction from the front and feed into the stock air box for the pod.. good or bad?

Cheers

its been done before, sau member limpus has placed a pod inside the airbox, maybe if he see's this thread he will post some info :D

good luck fitting a pod in the factory box lol

In that case i must be really lucky because i have...

My apexi pod is hidden inside my stock arbox with a metal intake pipe coming from my 2535 and a Z32 afm...its all about backyard ingenuity...personally i did mine because i had a spare apexi pod in my garage and felt bored one day...and most cops are non the wiser...

So the bottom line is...YES...you can fit a pod into an airbox...but it will take some trimming of parts of the airbox to have it sit nicely...my airbox is butchered anyway with a larger section of the base and side removed...it just helps to get alittle more air in...when i'm at the track i just rip the whole cover off and expose the whole pod...

As for whether it improves or hampers performance...you make up your own mind...i have done a couple of back to back dyno runs with and without the cover a year ago and power was almost the same...however it should be noted that this situation is not the same in real world conditions when you're doing 120km/h and ramming air into the engine bay...

I don't have a pic of the box with the pod inside but here is the engine bay with the airbox...the aim is to have it looking legal...

PC140009.jpg

I understand Limpus was bored and had a filter to play with and had a butchered box already so did this.

what about you subie?

why do you want to do it?

What is your reasoning behind it?

why/how do you think it's going to be better than even a stock NISSAN paper panel filter element in the stock air box using stock ducting?

Stock air box all the way

Z32 AFM also bolts straight up to it - half the time people don't even know what they are looking at so they won't realise its a Z32 AFM

Just use the stock air box with a paper filter man, you really can't go wrong

I have had to go back to an Apexi power intake filter as my standard air box doesn't fit with my new piping setup (intake and cooler) which really sucks to be honest

I'm just waiting for the day I get pulled over and raped! :(

One weekend when I am free I might attempt to make the air box fit, it is possible but just takes time to do it

Plenty of people making high power figures on standard air box - why wouldn't you use it?

Gday guys! :( I'm a new skyline owner and have to say these forums are awesome! I've been reading it for days on end and getting no sleep :D

Anyway, on to my newb question(s):

The skyline i bought (R33 GTST) came with a HKS mushroom filter, which i find to be bloody noisy and have ordered an Apexi power intake filter (or whatever they're called) to replace it. I was planning to put a box around this for legal issues, and was also considering setting up some kind of CAI piping into the box, but after reading it sounds like everyone touts the stock box/intake as superior for close-to-stock cars (mines got only the filter and a ?cat-back? exhaust AFAIK)

So i was wondering what would be the best option:

1. Find a stock box + intake, hack it to fit the Apexi (pod) filter.

2. Find a stock box + intake, forget the pod filter, use a k&n panel filter instead (totally stock setup)

3. Foget the stock box/intake and just build a partition/box for pod & a CAI

If the stock options are best, where to find them? Seems most cars have pod filters installed lol, so surely those original parts must be lying around somewhere?

Also, what's the Z32 AFM? I assume that AFM = Air Flow Meter, is Z32 the stock meter attached to the intake pipe after the filter?

Appreciate any advice :(

use the stock box, intake and filter.

sell the pod.

Z32 is the 300zx.

their AFM meter has a higher max voltage which means more tuning resolution.

I got the same as you (sort of)

just bought an R33, has a cat back and blitz pod.

I will be replacing that with the stock intake stuff soon.

I only get to play with the car a little bit on weekends so gotta get the service and stuff out of the way first.

I agree..

the sound is f*king annoying.

use the stock box, intake and filter.

sell the pod.

Z32 is the 300zx.

their AFM meter has a higher max voltage which means more tuning resolution.

I got the same as you (sort of)

just bought an R33, has a cat back and blitz pod.

I will be replacing that with the stock intake stuff soon.

I only get to play with the car a little bit on weekends so gotta get the service and stuff out of the way first.

I agree..

the sound is f*king annoying.

Thanks for the input GTST! Where do you plan to get the stock parts from?

Putting Apexi Pod in a stock box = just to keep the heat away from the pod and hide it.

I gota friend who did that and it worked quite well.

If your not running a large abount of boost just change it to a high flow panel filter.

I understand Limpus was bored and had a filter to play with and had a butchered box already so did this.

what about you subie? I'm just thinking about it first and might try to to do it when i have time

why do you want to do it? instead of making the box, i wanna use the stock air box and make the pod fit in it

What is your reasoning behind it? cop and make it look standard

why/how do you think it's going to be better than even a stock NISSAN paper panel filter element in the stock air box using stock ducting? I don't know, that's why I make this topic to see others think..

Cheers

That noise isnt the nicest but it is all intake noise from stock compressor, Since hiflowing my stock turbo but still running pod filter its much quiter and makes a nice high pitch whistle on boost, not that rushing air sound that stock turbo makes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...