Jump to content
SAU Community

What Spark Plugs For Rb25det?

J-train

By J-train,
in General Maintenance

 Share

Recommended Posts

Ben C34 Grand Master

Ben C34

Posted
Posted

If you can run the 1.1mm gap without it missing then do it. The bigger gap the better. People only reduce the gap when they are running large boost or have old, weak coils that can't provide a strong enough spark

That's true, only reduce gap if you have to.

Got a Pulsar Grand Master

Got a Pulsar

Posted
Posted

NGK BKR6EYA. = 0.8mm

I was running these on 10psi with stock ECU. No Problems.

Installed an SAFC 2 and my Tuner gapped them down to 0.7mm due to old Stock Coils. No Problems.

NGK BKR6EYA-11 = 1.1mm

I will go back up to 1.1mm soon as I just bought some Brand New Stock Coils.

This will be interesting...

mad082 Grand Master

mad082

Posted
Posted

That's what I thought.. I will try the 1.1mm gap an see how I go. It only has 140k on the engine so coils might be fine.

Is 1.1mm and 0.8mm the only 2 gaps I can run or should I try lower the gap in 0.1mm increments like as in if 1.1mm doesn't work maybe try 1mm then 0.9 then 0.8 or is that pointless? I'm new to the whole boost scene so excuse my lack of knowledge haha appreciate everyone's help :)

If they are the original coils at 140kms then they will probably be getting a bit weak.

And yes, you can just drop the gap by 0.1mm increments until it doesn't miss

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

If you want cheap BCPR6ES, get them off eBay

Just buy more than 12 at a time and it works out pretty sweet, $2.90 each delivered

http://www.ebay.com.au/itm/NGK-spark-plug-BCPR6-ES-plugs-BCPR6ES-tradeprice-2330-/330828510503?pt=AU_Car_Parts_Accessories&hash=item4d06ea7527

I just ordered 24 lol, works out to be $2.81 each.. :)

DR3AMN Explorer

DR3AMN

Posted
Posted

Well the 1.1mm gap works fine. Revs sooo much smoother now. Coils must be good :D Old plugs had a little miss before it revved. Doesnt miss at all during idle or rev. Have no driven it yet to test them under load but all seems fine. Thanks everyone for your help

  • 7 years later...
Kiza Newbie

Kiza

Posted
Posted

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️ Stock rb25

 

Ben C34 Grand Master

Ben C34

Posted
Posted
3 minutes ago, Kiza said:

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️ Stock rb25

 

Hmmm. You just set the gap to whatever you want with a very cheap tool.

trel Mentor

trel

Posted
Posted
10 hours ago, Kiza said:

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️ Stock rb25

 

I use those plugs with 1.1 gap and have zero issues. Drop gap if your coils are shit, otherwise leave at 1.1

BK Grand Master

BK

Posted
Posted

So why so hard finding info ? Gapping copper/nickel and platinum plugs is trivial. Iridiums are the only ones you've really got to be careful with. In NGK if it has no - prefix at the end it is like this-

# heat range.

Copper/nickel plugs, the bcpr#es is pregapped to 0.9mm / 36 thou, there is no 0.8mm gap in bcpr#es coppers.

Platinum plugs BCPR#EP and Iridium plugs BCPR#EIX, are pregapped to 0.8mm / 32 thou.

A -11 at the end indicates an 1.1mm / 44 thou gap as an option, available in all of these plugs.

BK Grand Master

BK

Posted
Posted
15 hours ago, Kiza said:

I've checked alot of places and I can't seem to find BCPR6ES spark plugs with 0.8mm gap I can only find 1.1mm and super cheap say (after rego checko) they are not a right fit for the rb25. After alot of searching and doing my head in I found BCPR6ES with a 0.9mm gap from justjap so that's what I went with... ?‍♂️Stock rb25

 

Also 5 is stock NGK heat range for RB25, 6 for RB26.

Probably why Repco / Supercrap say it's the wrong plug too.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...