Jump to content
SAU Community

Recommended Posts

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

R32 gtst slow aye? i dont think so, all thats done to my 32 is exhaust, fmic 12psi and adjusty cam gears... and im neck and neck with standard xr6t utes and thats off the line aswell... (have raced both manual and auto xr6ts same result) my mates r32 gtst with exact same mods as mine also pulls neck and neck with them... it was a real surprise because i thought i would get left behind... the only one that beat me had an exhaust+screamer and pulled a qtr of a car length so still not that great... dont be too quick to bag out the old rb20 :thumbsup:

roy is it?

thats quite surprising u can go around a track alot faster then Matts car, especially it being internally standard....quite curious do u mind directing me to some more in depth specs of your car? it cant be pushing more then 250rwkw......or is it?

Its got Tein RA coil overs, Sydneykid swaybars, a full TD06 setup with PFc and GTR injectors. Bracket so that i can run 324mm brakes with the std caliper, and HKS intercooler and exhaust. Thats about it, all from an internally std RB20 that at 16psi makes 234rwkws and at 19psi makes 260rwkws.

but come on roy.....be honest here.....you really think the rb20 is any better then its successors?

In regards i think it is better. They are cheap to replace. They are possibly the strongest of any factory RB, and they are not a headache with rego unlike if i had done an engine transplant. The trade off is they need more boost and revs to make the same power as the bigger RBs, but from a certain point they will never make the same power

you might be able to beat rays s15 or matts r34....but if i gave u a r33 or a r34.....im sure ull be even better.

They are heavier and the pistons in the Rb25 dont take the boost and detonation that the std RB20 does, and the RB25 has weaker rods. R34s are about the same weight as R32GTRs :thumbsup: So i doubt the same mods as i have done would make the bigger cars quicker. As they would require more power, which means more cooling, more suspension mods and more brake mods. So not really, but if done smartly the cars shoudl be quicker all things beign equal. Though they never are :)

but its proberly the only 1 out of a million that might be worthy of praise......

have u ever considered droppn a rb25 into your car at all?

okai okai......maybe its not as "rubbish" as wat others or myself make it out to be. but its defiently not as good as the 25

My point all along is not that they are better, but they can give great results so should not be the reason to steer clear of a particular car. They have their merits and of course shortcomings.

I have said it before., people that put RB25s in their R32s are the same people that would sleep with their wife's friends. At least with an Rb26 you can use the excuse that she was hot!

So no, never considered putting a std RB25 in my car, RB26 or hybrid engines yes. And i am not the only guy getting good results out of a std RB20. There is a guy in Perth running 12.00 flat and 290rwkws with a std RB20. one in Sydbey making 280rwkws before the car was pranged. Just because us R32 owners are cheap bastards and rarely put a turbo, good ecu and injectors on a car....doesnt mean the car doesnt respond to mods when the few that bother actually do

hahah this thread can go forever.

but my biased opinion says R32 definetly, its a real nice looking car and can reach 200kw with just turbo, cooler, exhaust and decent tune. for a daily much more than 200kw becomes a hassle.

i think the 32 is best because 1) i own one and 2) the way it makes u feel when u drive it, even tho it lacks down low power the engine its quite agressive when u get the revs going and can feels good to chuck around.

lol theres my 2 cents.

R32 gtst slow aye? i dont think so, all thats done to my 32 is exhaust, fmic 12psi and adjusty cam gears... and im neck and neck with standard xr6t utes and thats off the line aswell... (have raced both manual and auto xr6ts same result) my mates r32 gtst with exact same mods as mine also pulls neck and neck with them... it was a real surprise because i thought i would get left behind... the only one that beat me had an exhaust+screamer and pulled a qtr of a car length so still not that great... dont be too quick to bag out the old rb20 :thumbsup:

very well said...one good thing about the 32s is that quite a lot have had turbo swaps while in japan..I know mine had a 2510 on it with HKS front mount when I first picked it up...Changed the exhaust later on and yes it was poor below 3000 rpm...but over 3000 it hauled...I had a couple of runs with XR6T's lower revs I was a bit off, higher revs....they struggled to stay with me...at 16 psi it really got moving...No they are not as good as an RB25 but if you are doing trackwork then I would still go the RB20...look at replacement engine costs RB20 vs RB25.....Not just that but I am led to believe the RB20 computer is a bit more flexible when performing mods...they make great cheap thrashers

r32 punches an r33? lol ive never read something so silly in my life.

stock for stock r32 is the slowest rubbish box in the world from factory theyre what? 7 secs 0-100?

theyre 15yo+ cars and they wish they could pull those numbers

the r33 is faster and its been proven millions of times.

do the exact same mods to each car and the r32 just gets left further behind

exact same mods to a 32 and 33, and the 32 is slower? geee, reallly?????! derrr! dont hav to be a fregin scientist to firgure that one out.

evryone knows stock for stock the 33 is faster...and if u mod them in the same way ofcouse the 33 will be faster..

my 32gtst has only a few minor mods (exhaust,fmic,11psi,ecu remap) and it will get to 100 in mid 5's on crappy rear tyres...

so u may hav to mod the 32 a lil more...pfft, who cares, atleast ur in a car that looks better than the thousands of boat 33's drivin around...i see them every single day...ugly as hell itself.

they dont even get a second look, 33's just blend into the b/ground like commodores.

if u want sumthin special a nice clean 32 is the way :thumbsup:

my32_atAces_2_small.jpg

My R32 just has front mount, exhaust and 12psi and I've raced plenty of r33's (unknown mods) and beaten them all.

The engine's are great in R33's but the car itself fails. Put an RB25 into an R32 ftw.

R33's series 1's are ugly as too.

fixed it for u

If it's for everyday driving, and you are concerned about dropping down in power/torque too far then get the R33. The torque spread is far superior and you don't have to work as hard to make the car go. It's very flexible across the whole rev range. The interior is much nicer & generally has less wear and tear due to them being newer. If you can get your hands on a nice R33 series II you won't be disappointed.

Personally, I drove both and didn't like the lack of bottom end torque in the R32 and outdated interior. R32s can look nice, but so can most cars with the right bodykit.

Stock for stock the R33 series II performs better, has nicer interior, looks better (imo), has more potential, is a better daily and is more solid. If you are largely debating whether to get one over the other based on fuel consumption, suprisingly the fuel efficiency difference is not the largest of margins.

I'm not bagging out the R32s or RB20 for that matter. They are great cars. But just wanted to point out that every new generation has had extensive R&D performed by the manufacturer to be better than the last model/s. Just as the R34 is better than the R33. The more opinions, the more of an informed choice you can make. GL :D

Dont S2 R33s have that tacky clith interior? They do look nicer then the S1 though. And the interior, just like the exterior is very much a matter of taste as the R33 is too Camry for me. Then again teh R32 is very VN Commodore :D

The big thing with R33s is if you look at 10, 8 will be in good condition. With R32s the number will be more like 3 out of 10 ;)

fixed it for u

agreed

Dont S2 R33s have that tacky clith interior? They do look nicer then the S1 though. And the interior, just like the exterior is very much a matter of taste as the R33 is too Camry for me. Then again teh R32 is very VN Commodore :D

The big thing with R33s is if you look at 10, 8 will be in good condition. With R32s the number will be more like 3 out of 10 ;)

i actually prefer the series one trim. exterior wise, s2 all the wai

I don't think the style of the seats in all the Skylines through the generations (bar GTRs) are anything to rave about. But it is pretty easy to change the seats if it bothers you. Much harder to change everything else though.

I haven't heard the R33/Camry analogy before. I don't see it? :D I'd imagine there would be a lot of wannabe Skyline owners putting wings and kits on their Camrys if that was the case.

Both are good cars, but the R32 is a little too Vanilla Ice for me. ;)

Then again teh R32 is very VN Commodore ;)

:laughing-smiley-014: nice call.

I dont know whether that makes them better or worse than an s1 r33 camry though........

This tread seems to be going no where fast.

my opinion of the R32 is: R32 with RB25DET > *

you got the style, looks and power out of a small comfortable car.

even the RB20 with stock internals, decent turbo, cams, injectors and computer will set you up nicely.

on the other hand, my opinion of the R33:

r33_boat.jpg

that is all. ;)

Edited by dmr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...