Jump to content
SAU Community

Recommended Posts

checking up on my suburb (which has a max of 1 per month) and thought i'd try good ol 3047

Risk Assessment

YOUR POSTCODE

With up to 4 thefts reported each week, postcode 3047 is a high theft risk location. We recommend that you read these simple precautions you can take to protect your vehicle from theft.

lol

:(

Link to comment
https://www.sau.com.au/forums/topic/216584-playing-on-carsafe-site/
Share on other sites

Make / Model / Year / Number of thefts /Number of thefts not recovered / % of thefts recovered

Holden Commodore 1987 261 48 81.6

Holden Commodore 1986 230 43 81.3

Ford Falcon 1988 180 35 80.6

Ford Falcon 1989 177 37 79.1

Holden Commodore 1988 166 28 83.1

Ford Falcon 1990 163 33 79.8

Holden Commodore 1985 156 23 85.3

Holden Commodore 1989 136 26 80.9

Ford Falcon 1987 132 27 79.5

Toyota Camry 1989 125 16 87.2

Holden Commodore 1990 116 16 86.2

Holden Commodore 1984 112 13 88.4

Ford Falcon 1986 112 24 78.6

Toyota Camry 1988 104 17 83.7

Toyota Camry 1990 90 13 85.6

Ford Laser 1987 87 22 74.7

Ford Laser 1986 86 11 87.2

Ford Falcon 1985 86 12 86.0

Ford Laser 1988 80 16 80.0

Ford Laser 1989 77 19 75.3

well at least we're not in there....

YOUR POSTCODE

With less than 1 theft reported each week, the risk of theft in postcode 3149 is relatively low. Vehicles stolen in this postcode are likely to be those at risk of theft because they lack security. If you own one of these vehicles, theft is most likely to occur in shopping centre or commuter car parks, or in the street. If you have secure parking at home, such as a garage or lockable gates on your driveway, use it!

woohooo!!!!

Certain pockets in a suburb must really skew the results.

I live in Willy, and apparently it's a hi-risk area with up to 4 thefts/week. But heaps of people park their nice cars out on the street overnight. I drive past a SLK230, Porsche 911 Turbo and many random BMWs parked overnight, every night on the street on my way to work each morning.

I hardly see many dodgy people, and heaps of people leave their garage doors wide open during the day.

Now try somewhere near the commission flats near the CBD, and even as a guy I would be wary walking alone there at night. There have been gangs around attacking people and stealing their stuff. Parking in the commission flat carparks, while free, will get any skyline cleaned out in a matter of seconds.

I live in Willy, and apparently it's a hi-risk area with up to 4 thefts/week. But heaps of people park their nice cars out on the street overnight. I drive past a SLK230, Porsche 911 Turbo and many random BMWs parked overnight, every night on the street on my way to work each morning.

I hardly see many dodgy people, and heaps of people leave their garage doors wide open during the day.

Thanks for the tip... :whistling:

WooHoo! 3179 ftw!

With a maximum of only one theft reported each month, the risk of theft in postcode 3179 is low.

yay, we win! it's coz the only cars here are commodores and falcons, everyone has them so they don't need to be stolen

Risk Assessment

YOUR POSTCODE

With less than 1 theft reported each week, the risk of theft in postcode 2121 is relatively low. Vehicles stolen in this postcode are likely to be those at risk of theft because they lack security. If you own one of these vehicles, theft is most likely to occur in shopping centre or commuter car parks, or in the street. If you have secure parking at home, such as a garage or lockable gates on your driveway, use it!

Also, keep in mind that you probably drive and park in other postcode areas besides your own so it is worth reading these simple precautions you can take to protect your vehicle from theft.

Nice.

Dandenong:

With 5 or more thefts reported each week, postcode 3175 is one of the highest theft risk locations. We recommend that you read these simple precautions you can take to protect your vehicle from theft.

Noble Park:

With up to 4 thefts reported each week, postcode 3174 is a high theft risk location

Damnn!!!

Lucky im living in Hampton Park :thumbsup: With less than 1 theft reported each week, the risk of theft in postcode 3976 is relatively low.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...