Jump to content
SAU Community

GTR v LF-A  

153 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Okay, so like everyone else i felt a special stirring in the pants when i saw how gorgeous the GTR is in the steel. But now i've seen the shots of the LF-A being punted around Nurburgring I'm starting to think of the opinion that the Lexus is a more attractive looking machine than the GTR.

I pray that one day i'm in the position to be facing this dilemma, but i'd seriously consider the LF-A as a purchase over the GTR just for the way it looks and the intoxicating V10 sound.

Link to comment
https://www.sau.com.au/forums/topic/217742-gtr-v-lf-a/
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

And hats off to Lexus/Toyota. As part of the cars development they are racing it in the upcomign LeMans 25hr race. Largeyl std, with only safety and fuel cell mods for compliance to regs, the thing is going to be raced in its intended relaease state of tune.

They are also using young engineers etc do that they get valuable experience, so great for development of staff as well.

If they bag a good result then its great for bragging rights, if they suck they can blame the young team and the fact that the car is still in its development phase.

First impression is it has it ont he GTR for me. Looks brilliant, sounds emotive, the only question is performance?!?! That said the R35s look is realy growing on me and i am sure an exhaust change will make the note a bit more emotive

Link to comment
https://www.sau.com.au/forums/topic/217742-gtr-v-lf-a/#findComment-3842586
Share on other sites

If Toyota have the audacity to charge $163,000 for a queer looking luxo-barge like the SC430, I can only imagine how exorbitantly priced the LF-A will be.

So even if the production version matches the R35 'Ring time, you can expect to pay a 911-GT3-style price of admission to have your more aesthetically pleasing bodywork.

Link to comment
https://www.sau.com.au/forums/topic/217742-gtr-v-lf-a/#findComment-3844808
Share on other sites

All weather conditions? Who in their right mind tries to punt a performance car quickly in the rain? Visibility sux, roads have oil weeping out of them. When its wet its A to B time. SO have never understood the whoel traction in the wet thing, Sure its nice not to be thrown off the road, but any decent car is perfectly safe in the wet. Now if we are actually racing, then sure its a bonus. But who of us if we owned either of these cars would be racing them?

Link to comment
https://www.sau.com.au/forums/topic/217742-gtr-v-lf-a/#findComment-3845503
Share on other sites

Hats off to you then. I cant afford one, so no point me even thinking about it. Though, if i was going to track one i wodl be concerned about the cost of tyres and pads for one. But also after 18 months of playing with one at 5-6 track days a year what is the gearbox going to be like. Not to mention the kms on the engine which i read needs to be freshened before the old RB26 needed a timing belt change :laugh:

To me, Nissan have doen wonderful things with the GTR, but they have forgotten the roots of the brand. ie a Datsun that is cheap and reliable to get performance out of for a long time :banana:

Link to comment
https://www.sau.com.au/forums/topic/217742-gtr-v-lf-a/#findComment-3845837
Share on other sites

that engine rebuilt at 100,000kms or every year or whatever is BS. it's a rumour spread by certain people to disuade folk from buying cars without nissan warranty. the plasma coating is supposed to be good for over 500,000kms and some say as many as 1,000,000! on top of that it is only microns thick. 150 of them and wears no more than 10 microns per 100,000kms!

but you are right, it will be a bloody expensive car to track with tyres and pads costing a bomb. also the general wear on the thing wont be too nice. sandblasted front half after all those 200k+ runs down the straight, lots of underbody damage from ripple strips and gravel traps, bushes all shagged from hard use etc. I guess it's no different to any car but it's a big difference when some are starting with a $20K R32 and some are starting with a $150K R35....

Link to comment
https://www.sau.com.au/forums/topic/217742-gtr-v-lf-a/#findComment-3845921
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...