Jump to content
SAU Community

Recommended Posts

i have fitted and tuned 3 of the gtr plugin boards now and am very very happy with the results... cold start is great, steady afrs and smooth driving and no afms ...customers are very happy..

next week we are fitting 2 r33 gtst rb25 plugin boards.. will keep you guys posted..

also for the bigger hp gtrs we are fitting a v88 ecu with plugin adapter in 2 weeks for testing...

cheers, mark Godzilla Motorsport...

  • Replies 895
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
:D

Like Trent, I too am interested in purchasing these items through someone other than a direct retail competitior...

Hey sam ive fitted and played with one and they are great but they are just a re-branded LINK from NZ. They tune up real sweet and the software is easy to use and quite well laid out, i certainly reccomend them but i must now compare distribution and pricing with LINK.

Edited by URAS

have a r33gtr with the top of the line vipec v88 ecu with plugin adapter loom running today...

this ecu setup is for the bigger hp rb26 gtr and rb25s runs a external 7 bar map sensor...

tuning it this week to get some good tuning data...

cheers, mark

i have fitted and tuned 3 of the gtr plugin boards now and am very very happy with the results... cold start is great, steady afrs and smooth driving and no afms ...customers are very happy..

next week we are fitting 2 r33 gtst rb25 plugin boards.. will keep you guys posted..

also for the bigger hp gtrs we are fitting a v88 ecu with plugin adapter in 2 weeks for testing...

cheers, mark Godzilla Motorsport...

Hey sam ive fitted and played with one and they are great but they are just a re-branded LINK from NZ. They tune up real sweet and the software is easy to use and quite well laid out, i certainly reccomend them but i must now compare distribution and pricing with LINK.

No surprise there.. Software was almost identical to the old G3...

  • 2 weeks later...
Hey sam ive fitted and played with one and they are great but they are just a re-branded LINK from NZ. They tune up real sweet and the software is easy to use and quite well laid out, i certainly reccomend them but i must now compare distribution and pricing with LINK.

The link is almost $400 cheaper though? whats the difference?

Does the $400 just get you australian based support?

Also, what about air temp sensors, with the afm gone, do you wire one in?

all vipec ecus come with a air temp sensor and plug to wire in...the gtrs use the factory air temp sensor and for rb25s use the vipec air temp sensor supplied with the ecu...

ecus can be supplied with base maps depending on your mods talk to your local vipec dealer...

and yes you do get great support from vipec dealers...

the r34 gtt manual ecus are a few weeks away... r34 gtt autos will need to run the factory ecu to control the auto and wire in a v88 ecu to run the engine....

cheers, mark godzilla motorsport.

The link is almost $400 cheaper though? whats the difference?

Does the $400 just get you australian based support?

Also, what about air temp sensors, with the afm gone, do you wire one in?

  • 2 weeks later...
Are any of the sellers shipping these loaded with a base map yet, similar to how the power FC is standard?

Yes we are able to supply units with base maps and also a variety of levels of tune.

Be great when you become a SAU sponsor then :P

i contribute more on here than some trader who pays $50 a month to flog their wares on here and contributes nothing.

Profit i make from Vi-PEC = $0 :)

So why would i pay $50 per month to make no profit?

If your going to police the forums at least be consistent because...

you are seen in other threads today clearly supporting mates advertising their own businesses on here...see link below

http://www.skylinesaustralia.com/forums/Wo...ng-t238010.html

Edited by DiRTgarage
  • 2 weeks later...

I have a ViPEC with a Greddy EBC. Works fine I guess. I was told standalone EBC's function better than the Vipec's but I can't see there being much of a difference, other than being able to switch from high to low.

I was told that you can wire in a high/low boost switch.

I was looking at the website earlier and noticed in the comaprison table between V44/V88/plug-in, that the V44 and plug-in ECUs do not have knock control. It says the V88 does, but not the others. I hope that the table wrong. Can anyone confirm? I was under the impression they all have knock control. If they don't then that's a bit disappointing as your losing a factory feature. It was also a major advantage over the Power FC and others.

Of course, if I really want knock control I could buy a V88, but then a lose the 'stealth' factor of the plug-in boards.

I was told that you can wire in a high/low boost switch.

I was looking at the website earlier and noticed in the comaprison table between V44/V88/plug-in, that the V44 and plug-in ECUs do not have knock control. It says the V88 does, but not the others. I hope that the table wrong. Can anyone confirm? I was under the impression they all have knock control. If they don't then that's a bit disappointing as your losing a factory feature. It was also a major advantage over the Power FC and others.

Of course, if I really want knock control I could buy a V88, but then a lose the 'stealth' factor of the plug-in boards.

You can wire in a high/low switch and set up a boost table to suit.

Only the V88 has knock control, that is correct. Don't worry about the "stealth" look, you can't see my V88 ecu unless you start ripping apart the interior carpets etc.

Mike

You can wire in a high/low switch and set up a boost table to suit.

Only the V88 has knock control, that is correct. Don't worry about the "stealth" look, you can't see my V88 ecu unless you start ripping apart the interior carpets etc.

Mike

That's a bit of a worry, because there is no means of controlling knock and no means of indicating it like you would witha Power FC. Not sure if I wanna cough up the extra $$$ for the V88, plus adapter loom. It then puts me in the ball park of other ECUs. Other than that, the Vipec does look impressive :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...