gazal Posted May 13, 2008 Share Posted May 13, 2008 I know there's faster cars out their but i'm getting there. Recently install a greddy FMIC and Blitz sbc i-color boost controller. Thanks to RE custom, what is the max KW i can get out of a stock turbo and ecu? and what steps do you guys think i should do next? Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/ Share on other sites More sharing options...
inark Posted May 13, 2008 Share Posted May 13, 2008 ahahahahahhaha j/k i aint gonna laugh cause my 1st dyno i pulled a massive 110rwkw!! stupid puny RB20 Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3862870 Share on other sites More sharing options...
paulr33 Posted May 13, 2008 Share Posted May 13, 2008 without spending any $ instantly read the dual stage boost hack in the tutorial section this will make the car run 9psi from memory all the time, the auto runs less boost than the manual, so your missing some power too Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3862871 Share on other sites More sharing options...
gazal Posted May 13, 2008 Author Share Posted May 13, 2008 How do you read the boost gauage? it's start at -0.00 then it goes up to 0.50 or something does it means that it is running at .5 boost? if the car has been boosted at 10 pounds should it should 10? a bit confuse here. Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3862947 Share on other sites More sharing options...
R31Nismoid Posted May 13, 2008 Share Posted May 13, 2008 http://www.skylinesaustralia.com/forums/fi...-co-t45218.html Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3862972 Share on other sites More sharing options...
DRD-00F Posted May 13, 2008 Share Posted May 13, 2008 R33 GTST hey? That makes me damn proud of my first dyno then Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3862983 Share on other sites More sharing options...
dmac_25 Posted May 13, 2008 Share Posted May 13, 2008 Not bad bosst her up to bout 12 and aim for bout 140-150 Not to brag my fist 195 lol Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3862990 Share on other sites More sharing options...
jenkies Posted May 13, 2008 Share Posted May 13, 2008 good stuff!! and thats a fine dyno reading! now everytime you have some work done and dinoed you have a base of comparrison! if it makes you feel better my gtr first dyno made 147 from reccolection on stock boost with minor mods. top stuff Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863005 Share on other sites More sharing options...
(OO)SKYLINE(OO) Posted May 13, 2008 Share Posted May 13, 2008 Good start with the frontmount intercooler Get an air pod or stick to the standard air box and up grade the panel filter. Car could breath abit better. BTW did you have an exhaust? Can't remember when I saw ya car at the East Side meet up... Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863008 Share on other sites More sharing options...
dezz Posted May 13, 2008 Share Posted May 13, 2008 12psi on the stock ECU is a waste of time if you want the max out of the stock turbo, you'll need engine management. either standalone (pfc etc) or piggyback (SAFC etc) in a manual you could expect 200rwkw with supporting mods (3" turbo back exhaust etc) maybe a touch less in an auto. Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863011 Share on other sites More sharing options...
dmac_25 Posted May 13, 2008 Share Posted May 13, 2008 12psi on the stock ECU is a waste of timeif you want the max out of the stock turbo, you'll need engine management. either standalone (pfc etc) or piggyback (SAFC etc) in a manual you could expect 200rwkw with supporting mods (3" turbo back exhaust etc) maybe a touch less in an auto. True with the ecu get a safc for budget or if you have funds get power fc i was trying to get the bloke some free power Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863014 Share on other sites More sharing options...
dmac_25 Posted May 13, 2008 Share Posted May 13, 2008 12psi on the stock ECU is a waste of timeif you want the max out of the stock turbo, you'll need engine management. either standalone (pfc etc) or piggyback (SAFC etc) in a manual you could expect 200rwkw with supporting mods (3" turbo back exhaust etc) maybe a touch less in an auto. Also no go with pfc an auto if you want good tuneablity go emanage ultimate for the auto Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863018 Share on other sites More sharing options...
paulr33 Posted May 13, 2008 Share Posted May 13, 2008 How do you read the boost gauage? it's start at -0.00 then it goes up to 0.50 or something does it means that it is running at .5 boost? if the car has been boosted at 10 pounds should it should 10? a bit confuse here. the stock boost guage is in mmhg not boost or psi it goes from -760mmhg to 760mhg when its near -500 at idle, its becuase the engine is in vacuum when it words its way towards zero and past zero, the engine is in positive boost so +5 is 500mmhg which is 9.6psi Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863031 Share on other sites More sharing options...
eddieeeee-ro Posted May 13, 2008 Share Posted May 13, 2008 so is that with a bigger exhaust? Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863228 Share on other sites More sharing options...
SLYNE Posted May 13, 2008 Share Posted May 13, 2008 dw one day you'll be up there pulling the big kw Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863261 Share on other sites More sharing options...
gazal Posted May 13, 2008 Author Share Posted May 13, 2008 BTW did you have an exhaust? Can't remember when I saw ya car at the East Side meet up... The exhaust is still stock. All i have is a magnaflow muffler. I'm planning to get either a greddy or hks exhaust system not sure which one yet. the stock boost guage is in mmhg not boost or psiit goes from -760mmhg to 760mhg when its near -500 at idle, its becuase the engine is in vacuum when it words its way towards zero and past zero, the engine is in positive boost so +5 is 500mmhg which is 9.6psi Thanks for that.. so i'm gussing that when it reaches +0.65 its around 10-11psi? I read somewhere that a guy got his car to 185kw with a stock ecu.. possible? i want to get the most out of the stock ecu for the moment as i'm saving up to get a haltech ecu.. Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863715 Share on other sites More sharing options...
Modena Posted May 13, 2008 Share Posted May 13, 2008 Thats pretty good man. Dont laugh Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863832 Share on other sites More sharing options...
r32line Posted May 13, 2008 Share Posted May 13, 2008 j/k i aint gonna laugh cause my 1st dyno i pulled a massive 110rwkw!! stupid puny RB20 That must have been dead stock ya? Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3863863 Share on other sites More sharing options...
WazR32GTSt Posted May 14, 2008 Share Posted May 14, 2008 nice work! i pulled 106rwkw on my first dyno, fairly stock rb20 auto 2 years later i pulled 170rwkw, still with the auto and only a few more mods! its good to get a "standard" dyno figure, as it feels better to be able to see exactly what your mods have done to the car.. Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3865025 Share on other sites More sharing options...
bLaQ.bOi Posted May 14, 2008 Share Posted May 14, 2008 i ripped 153 rwkw in my r32 gtst all it had was a catback and a cooler ? lmao i even put it on youtube cars for sale atm Link to comment https://www.sau.com.au/forums/topic/219020-my-first-dyno/#findComment-3866417 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now