Jump to content
SAU Community

R34 Gtr Instrument Cluster Into Gtt?

OON80

By OON80,
in Exterior & Interior Styling

 Share

Recommended Posts

NZMO Experienced

NZMO

Posted
Posted
Can you put a R34 GTR instrument cluster into a R34 GTT?

Inparticular a NISMO 300km/h GTR cluster into a GTT?

Will it just plug in?

I'm not to sure about the GTR cluster, however you can get the R34 GTT Nismo 300km/h for the GTT straight swap.

I have this NISMO 300km/h cluster in my GTT

R34NRG Grand Master

R34NRG

Posted
Posted (edited)
Can you put a R34 GTR instrument cluster into a R34 GTT?

Inparticular a NISMO 300km/h GTR cluster into a GTT?

Will it just plug in?

no it wont because the GTR has AWD sensors and everything which the GTT dosnt, it would be stupid to put one in wen you can get a 300km one that will work 100% for the gtt.

nengun-0242-00-nismo-combo_meter.jpg

nengun-0242-01-nismo-combo_meter.jpg

nengun-0242-02-nismo-combo_meter.jpg

http://www.nengun.com/nismo/combo-meter-skyline-r34-gtt

Edited by R34NRG
OON80 Enthusiast

OON80

Posted
  • Author
Posted (edited)

already aware of GTT NISMO cluster.

I like the look of the white faced GTR NISMO cluster better, hence my question is not stupid.

But thank you anyway R34NRG.

p.s. DOSKI your GTT is one of the better that i've seen, great job.

Edited by OON80
R34NRG Grand Master

R34NRG

Posted
Posted
already aware of GTT NISMO cluster.

I like the look of the white faced GTR NISMO cluster better, hence my question is not stupid.

But thank you anyway R34NRG.

p.s. DOSKI your GTT is one the better that i've seen, great job.

if you want white faces just take them out and custom job it.....my apologies if ive made it sound like your an idiot. you didnt mention anything of white faces in your original thread so i assumed u wanted it for the 300kms read out.

peace.....

OON80 Enthusiast

OON80

Posted
  • Author
Posted

I was hoping it would be easier and not have to resort to custom work. I should have known by now nothing is easy. Any ideas on how to custom job it. I probably should search the forum first, never mind.

Thanx R34NRG

p.s. why has the GTR dash need of connection to AWD sensor? couldn't these extra connections just not be connected and have all the appropriate dials connected? (this is just me still hoping for an easy option.)

Yo-Yo Grand Master

Yo-Yo

Posted
Posted

Is there any laws or regs to consider when replacing the speedo? or is the speedo a separate part and the nismo meter just has a cut-out for it?

I've been wanting to get a nismo dash for some time, lights up very nicely too!

is the nismo meter directly plug to plug cvompatible with the GT-t?

  • 16 years later...
Watermouse Collaborator

Watermouse

Posted
Posted

Where are u located? U got nothing on your sig 
There’s a place in Carrington (Newcastle) that refurbishes speedometers/gauges.

They can also adjust the new odometer to the kms’ of the previous odometer and supply a certificate, also re calibrate the speedometer 

silviaz Experienced

silviaz

Posted
Posted (edited)
5 hours ago, Watermouse said:

Where are u located? U got nothing on your sig 
There’s a place in Carrington (Newcastle) that refurbishes speedometers/gauges.

They can also adjust the new odometer to the kms’ of the previous odometer and supply a certificate, also re calibrate the speedometer 

In Sydney. I didn't want to update the cluster originally for that reason of, I had no idea where to find someone who does calibrate the km's, also it's expensive af lol. Just wanted to make my faceplate look a bit more modern.

Edited by silviaz
silviaz Experienced

silviaz

Posted
Posted (edited)
19 hours ago, GTSBoy said:

Sorry to sound thick....but what does the "faceplate" have to do with adjusting the odometer? Surely the odo stays put and you change the fascia. Surely they are not the same thing.

Not with adjusting the odometer but the calibration of the cluster, because the dials are in different positions I believe? a 180kph cluster vs a 320kph cluster. 

Edited by silviaz
GTSBoy Grand Master

GTSBoy

Posted
Posted

Hang on, You want to put a 320km/h faceplate on a 180km/h speedo? That's not how it's done. You get a 320 km/h speedo.

It's probably relatively simple for an instrumentation specialist to recal a properly electronic speedo like that, provided that there is a means provided to do so. For an older analogue/electronic speedo, the factory adjustment might be little more than a pot that allows a +/-10% tweak. A very modern digital unit might need access to the correct programming software, or simply be a dumb gauge and everything is done in the BCU. (That last won't be the case for an R34 though).

But as I said - no-one changes the face of the speedo then recals. You put in the whole speedo. In fact, generally you put in a whole dash.

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

I believe (this is a great silviaz thread where we must all interpret) that he is asking how to put a GTR cluster into the car.

But because the dials are reversed on the GTR (speedo and tacho are swapped positions) he's asking how to do it.

The answer is you buy a R34 GTT Nismo dash, which also has 320kmh on it, and will plug straight in. The longer answer is it IS possible to configure a GTR cluster to work in a GTT, so if you somehow got one of those cheaper than the Nismo GTT cluster, you could configure it to work.

Whether you have the time/skills to do it and whether it's worth the $ is another story. There's probably GTR to GTT cluster information out there. In threads like this one.

I assume also what is being asked is he doesnt want to change the whole cluster. Just the KMH dial itself and put it back together in another cluster, then recalibrate the speedo needle so it doesnt show 320kmh when the car is doing 180, and is asking how to calibrate that.

Which is doable with like a Dakota Digital speedo/signal interpreter box but jesus man just buy a cluster.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...