Mark And Duncans R32 Build

[Angus Smart]

Much better: http://www.hurricanesgrill.com.au/

I eat there a bit, but i would prefer going to kellys grill at the junction! ribs there as just as good if not better.

kellys is up near the cinemas! and best of all, no fu$#@$in waiting around!! as you cant book at huricanes after 6 for some reason.

Edited October 28, 2008 by Angus Smart

[N1GTR]

Havnt been there before, im more of a rump person myself

[Duncan]

so its official then, all blokes have the hiden away from wifey fund. mines been geting raided heavily as of late.

*cough* not to be talked about *cough*

some of us have wives who know where the internet is....

[Evocoop]

*cough* not to be talked about *cough*

some of us have wives who know where the internet is....

'

Unless you have a laptop in the kitchen, you need to shorten the chain sir.

[Kel]

*cough* not to be talked about *cough*

some of us have wives who know where the internet is....

and watch this thread so they can keep account of the racing spend equivalent shoe and handbag fund

BUSTED!

[Neil]

'

Unless you have a laptop in the kitchen, you need to shorten the chain sir.

Tiger some wives have their own lappy's and surf in here while hubby cooks dinner.

Actually I don't have such a fund,,,Don't need one,,we either have the money or I suffer dunlops at hillclimbs,,,,I just thought I would fish and see what I reeled in.

Neil.

[Neil]

and watch this thread so they can keep account of the racing spend equivalent shoe and handbag fund

BUSTED!

Oh shit see what I mean,,,lucky it's Kelly,,,so it's not all bad.

[Kel]

Oh shit see what I mean,,,lucky it's Kelly,,,so it's not all bad.

heh heh always love your work neily

[haw001]

What's the plan for this weekend? I'm not home til Friday night so can't do any pickups, but the weekend is free. Saturday is better.

[N1GTR]

What are you guys using for cam cap bearing studs/bolts?

[shanef]

What are you guys using for cam cap bearing studs/bolts?

the only ones i could find were tomei's. i reckon arp make them but i couldnt find an arp listing anywhere (only for porsche they list)

[Swiper the Fox]

What are you guys using for cam cap bearing studs/bolts?

The last 2 engines i did used JUN and GReddy...both are suitable.

[tacker]

Ohh god when do we need to start with after market cam cap bolts they are the only nissan thing left in my soon to be repaired engine.

[N1GTR]

the only ones i could find were tomei's. i reckon arp make them but i couldnt find an arp listing anywhere (only for porsche they list)

Same thats all i can find - but not really cheap

The last 2 engines i did used JUN and GReddy...both are suitable.

Prices for them?

Ohh god when do we need to start with after market cam cap bolts they are the only nissan thing left in my soon to be repaired engine.

Same

[Beer Baron]

Ohh god when do we need to start with after market cam cap bolts they are the only nissan thing left in my soon to be repaired engine.

good nissan ones are ok. plus the tomei/jun/trust etc are all stud kits.

[tacker]

only running type B springs and 9.15 lift anyway

[Beer Baron]

yeah nissan will be fine for that. a lot of tuners I know these days prefer to steer away from head studs in 26's unless you really need them, and it's a similar story with cam cap studs. only worth doing if you really need to. i used brand new nissan bolts on mine, but as long as yours are good just use em again.

[N1GTR]

So at what sort of cam spec would you upgrade them?

[DRD-00F]

When you guys are done with that shoestring, can you return it to it's rightful owner?

Thanks heaps

[Swiper the Fox]

yeah nissan will be fine for that. a lot of tuners I know these days prefer to steer away from head studs in 26's unless you really need them, and it's a similar story with cam cap studs. only worth doing if you really need to. i used brand new nissan bolts on mine, but as long as yours are good just use em again.

agree...sometimes people can go a little OTT when it comes to engine hardware. They send me boxes and boxes of shiny Jap parts and ill put them in if they so desire. Ill recommend head studs to all RB's running 400kw+ but cam cap studs...the jury is still out on that one. My opinion is that they do not see much stress so bolt stretch will be minimum.

Edited October 30, 2008 by DiRTgarage