Jump to content
SAU Community

Recommended Posts

Looks like an Import from Eddy, Did this car come form importer?

Did it come with any documents etc etc?

Have it well checked and make sure kms are correct. We use to do compliance for this guy.

Hrmm, your scaring me man... So this eddy dood resides in camperdown??? and was he dodgy when u did compliance for him??

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Well i suspect alot of his speedos were "corrected" we were getting some cars with worn steering wheels, seats etc etc saying they had only done 30,000kms. May i ask what you payed for this? sure R34's have come down but this should still have cost you around $55 to $65000 compled and on the road.

Did he offer you any other cars, usally holds alot in stock especially evo's, R34 and S15.

Edited by CHO50N

That same car, Jimmy offered it to me for $49000 and that was before I started haggling. So I hope Specrzx got it for 49k at the most. I had a good look at the cars, and 3 others he had in stock. They were all pretty clean, except the V Spec II Nur had a full respray. The panels and doors lined up good, the interiors of all the GTR's were very clean. But I didnt get a chance to check the undercarriage which is very important.

Mate of mine bought a blue non V Spec for 50k not long ago and it was a rust bucket. He then took the car back and complained and they exchanged it for a white one. He still had problems with the 2nd car as it didnt track properly. Did a few wheel alignments and still problem persisted. Took it to Allie at Powerplay and he spotted the right side had a heap more castor than the left but still had factory rods. So therefore that car had a hit on the right and wasnt fixed properly.

I dont want to scare anyone here, but I thought this should be made public.

Caveat Emptor

hehe, I know this guy has a little 'wharehouse' on barr st. pain in the arse for all the people who live in the biscuit factory as he parks his cars all up and down the street which doesn't leave much room for residents.

any car sold without auction sheet, or log books, or service book should be treated as suspect if it has less than average kms. for a 1999 R34 GTR I would say about 80,000-120,000 would be the average. There are some with less, but don't forget it's a 10 year old car, and don't buy the bullshit about people in japan not doing any driving....

Just to let you know i just purchased by non v spec r34 gtr for 49k with a genuine 38k on the clock. This is just for a comparison.

you say genuine but did it come with the auction report? and the log books? and the service book? cars with kms that low will almost certainly be one owner cars too so you should have the owner history as well. just saying it's very hard to back up kms of an imported car unless you have the paperwork to support it.

hrmm... scary... well i drove it and hurted her abit =\ for the first day JUST incase anything was gunna break if i did hurt it abit before freight to perth and after that it still seemed ok.. no tappy noises drive is smooth everything seemed like its in working order i guess.. Maybe i shoulda spent a bit more time checking the car out =[. Mxfly did u notice a small dent on the rear quater panel of the right hand side?? I noticed it and I asked what happened here but this was after i purchased it, they're response was... I didn't even know. So i jsut couldn't be bothered waiting and just said don't worry about it... being impatient kills. But then again I might not come by this very often and it is my last sports car... Talk about small mods, the simple mods are a definite, indicators and clutch sounds like a good idea... Like the feel of a immediate engagement. and u got 13.2 ?? nicee

Sigh sigh... Anyways i wanna fit in a aluminium radiator, arc airbox and n1 water pump. What else do you guys recommend for cooling? I want this car to last as long as possible. Do vspecs come with oil cooler?? i didn't look thoroughly in the engine bay but it had braided lines from the oil filter to the front bumper..

Hi,

If you're interested in cooling (especially if you take your car back to Perth) you can get an exact NACA duct copy of the V Spec II fitted into your bonnet.

Let me know if you want the source. It only costed $45 + gst + post. It's plastic and you also supply a bit of SAAS black mesh to your panelbeater.

The NACA Duct helps to cool the turbo area

Cheers

Sigh sigh... Anyways i wanna fit in a aluminium radiator, arc airbox and n1 water pump. What else do you guys recommend for cooling? I want this car to last as long as possible. Do vspecs come with oil cooler?? i didn't look thoroughly in the engine bay but it had braided lines from the oil filter to the front bumper..

By upgrading your radiator you should be able to keep the temp at a lower level.

N1 Water pump = pretty much race applicaitons, I probley would not bother IMO but its doesn't hurt I guess.

ARC Air box = to allow better flow of air to the turbos.

Oil coolers are an aftermarket item and will lower the temp of the oil in result keep the engine running smoother.

Do you have a remote oil filter?

BTW just for a peace in mind, your car is designed in Japan. Its a sub-tropical climate and the temparatures can reach pretty high. So Nissan would have designed the cars to be able to cope with quite hot and cold weather. You living in NSW (judging by your number plate) I don't think NSW will have such extreme temps as to Japan / Asia. Besides those bush fires you get in the summers.

What Iam trying to say is you can do all these cooling mods, which will only do better but not to get worried if you don't upgrade the cooling.

But having said that these cars are designed in Japan, when tuning a car to race spec, you gonna need all the cooling you can get. Japan or any part of the world.

Edited by (00)SKYLINE(00)
Well i suspect alot of his speedos were "corrected" we were getting some cars with worn steering wheels, seats etc etc saying they had only done 30,000kms. May i ask what you payed for this? sure R34's have come down but this should still have cost you around $55 to $65000 compled and on the road.

Did he offer you any other cars, usally holds alot in stock especially evo's, R34 and S15.

"chinatown eddie" and Jimmy, his brother, in australia st camperdown sells to a lot of international students

with international licenses and more money than sense. He makes a big deal about how he sources his cars from

japanese private sellers but I don't buy it. He advertises as a private seller in carsales.com.au

A de-registration certificate I saw listed the japanese owner as "traffic co, ltd"

and if you google them up you will find that their japanese page (cached by google) USED to say (in english) that

they sell accident damaged vehicles. It no longer says that. I've no idea if that was a source for one,

some or most of his cars but it was a red flag to me. Probably an ok place to buy a cheap Delica, but with all the evos

s15s and gtr's I'd start from the assumption that the miles are unknown and the car has possibly been repaired

from a hopefully minor shunt. If you can get anything on the japanese side in the way of

paperwork like the original auction rating, odo declarations, log books and what not then you're lucky .. as has been

said in this topic buyer beware. Don't just get the car inspected (if you can find a shop within his mile limit) but ask

them to look for wear consistent with a rolled back odo and negotiate accordingly.

on the plus side I thought Jimmy was a bit of a character, and he did refund my deposit (thanks mate!). I figure

he won't care that this stuff is public as my guess is most of his customers are the "ready fire aim" type and by

the time they read this it'll be too late and they probably won't care anyway. For those that do I think getting

a car thru j-spec or IMG is a safer choice.

Ouch.... Sighh too late now.. Im stuck with it... err... Well at least i drove it the whole day and everything seem ok. knew i shoulda asked u guys before making a choice... well if this car goes down hill ..... He has a site www.topmotorimports.com all his cars "looks" nice but if u look closely to the car when ur there ull see a few dents here and there... o well hope all good..

Ouch.... Sighh too late now.. Im stuck with it... err... Well at least i drove it the whole day and everything seem ok. knew i shoulda asked u guys before making a choice... well if this car goes down hill ..... He has a site www.topmotorimports.com all his cars "looks" nice but if u look closely to the car when ur there ull see a few dents here and there... o well hope all good..

hey if you like the car you like the car .. that is all that matters! it certainly looks very clean.

A more risky dealer is more like a lottery that is all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...