Jump to content
SAU Community

Recommended Posts

well we were just out there last week.

but you need at least your CAMS level 2S licence, fire extinguisher (mounted correctly), blue triangle on the bonnet to show where the battery is located. you also need to be a member of a car club. have a helmet (obviously) need to wear long sleves (preferably cotton) you need to make sure your bonnet has a secondary latch (if its got a standard bonnet it SHOULD pass)

also it pays to go over your car before you get there to make sure it will pass scruteneering, ie. battery is secured, tyres are good etc...

thats about it, im sure if i have missed anything i will be corrected...

Certain times of the year - yes, only when track days are on

License - yes, CAMS L2S

Club - yes, to get the CAMS licence, must be part of a club affiliated

Basically join SAU-Vic, get CAMS, go racing.

Cheapest option in Vic :)

Thanks ferni:

Hey mate.

First of all you need to be a member of a CAMS affiliated club, such as SAU Vic. You can join for $70 first year and $50/y after that. See this thread for info on joining. http://www.skylinesaustralia.com/forums/Sa...ber-t60590.html

You will also need to get your cams L2S License - think it's about $95/year (from memory last time i renewed). See here for the form: http://cams.com.au/downloads/paperforms/20...Application.pdf

Once you have these 2 things you can go to any club level track day you want. Plenty are run by different clubs. WRX Club, HSV Club, PIARC Club, MG Club etc...

We (SAU Vic) run our track championship at WRX days. See this link for more info: http://www.skylinesaustralia.com/forums/20...-C-t203667.html

Next SAU day is on 1st June at Sandown. These days cost around $150 give or take.

As for what has to be done to your car, not a whole lot. You will need a fire extinguisher mounted in cabin (About $20 from kmart, autobarn, etc...) - I mount mine behind the passenger seat under where the legs of a rear passenger would sit. You also need pants, long sleeves and covered shoes. And of course a Helmet (ADR approved).

Also make sure your car is in good condition - ie no oil leaks, working brake lights, all simple stuff that you should have sorted on your car just to drive it on the street :)

See this link for more info about other events SAU Vic runs for its members:

http://www.skylinesaustralia.com/forums/20...en-t198251.html

If you want to have a look at some Club lap records and past motorsport championship results. Check these links:

http://www.sauvic.com.au/lap_records

http://www.sauvic.com.au/motorsport_championship

Hope this helps :(

MOTORSPORT EVENTS is good to find out what is going on in Vic.

Actually that first link is out of date now - how to join SAU VIC:

http://www.skylinesaustralia.com/forums/Sk...or-t220207.html

Basically if you have any queries on joining SAU VIC you can send an email to [email protected] or send me a PM.

If you have any other motorsport specific queries, you are better off sending a PM to Ferni, Belsil80 or Scotsman (our motorsport director) or send an email to [email protected]

Cheers!! :)

~Kaz

The big difference is however is tht a club track day is about half the price of a training day so if you plan on going to the track more than once it quickly pays for itself to go the club route. If it is just a once off fun thing then the training days are probably the better option.

^^^ Both true, although the good thing I find about the training days is you get 10 times more track time and by the end of the day there aren't that many people out there so you can go as fast as you like :wub:

*Edit: Although what I call fast and what you two call fast is two different things :/*

^^^ Both true, although the good thing I find about the training days is you get 10 times more track time and by the end of the day there aren't that many people out there so you can go as fast as you like :)

*Edit: Although what I call fast and what you two call fast is two different things :D*

That's a good point. But the other side of it, is doing 20min sessions flat out isn't usually the best for the car, plus everything starts overheating - brakes, tyres, engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...