Jump to content
SAU Community

Recommended Posts

Well i got it for a TOO good price cause its my mates shop hehe... and the RRP is $89 from Autobarn... i saw them for $75 at Peps auto... im sure any Autobarn will price match... call around... still a 100 times better then any Mobil, Castrol and Valvoline! RP are real good... one of the best!

Mobil 1 GOLD 0W40 ($80) isnt too bad but is a group IV.... where RP is group V ($75) :O

Cheers

Edited by QRI05E
Well i got it for a TOO good price cause its my mates shop hehe... and the RRP is $89 from Autobarn... i saw them for $75 at Peps auto... im sure any Autobarn will price match... call around... still a 100 times better then any Mobil, Castrol and Valvoline! RP are real good... one of the best!

Mobil 1 GOLD 0W40 ($80) isnt too bad but is a group IV.... where RP is group V ($75) >_<

Cheers

I think i previously read something about someone recomending the RP and changing the oil every 10,000kms, or should it still be done every 5k?

I personally wouldn't... even though they recommend it... oil would be oxidized/burnt (black) by 5000 - 6000kms... especially in a hard driven turbo charged engine... I'll be changing my oil every 5000kms with Royal Purple... 10W40

If it seems bit pricey then just get any decent synthetic oil such as Pennzoil or Pernrite SIN and change every 5000kms or 3 months... I personally think its more important to service your car regularly with decent oil rather then using the best oil and leaving it for 10,000kms... but for me, the price difference wasnt that much between the Castrol or Mobil 1 and the RP...

Considering that any work shop will charge between $99 - $150 for a service (oil/filter) and probably use some cheap dino oil... i would rather spend $75 - $80 on the best synthetic oil (Royal Purple) and $5 for a cooper oil filter and bout 15min of DIY in the garage >_<

Cheers

Edited by QRI05E

Oil being black doesnt mean its burnt or oxidised at all. Some oils naturally turn dark with heat. Others go dark because of soot loading. If it truely is oxidised by 5,000km then you have a crappy oil to begin with.

I believe RP is not entirely Group V, but a mix of Group I, IV & V. Group V doesnt mean anything anyway, its a classification for anything that doesn't fit into the other categories. You could class honey as Group V if you want.

still a 100 times better then any Mobil, Castrol and Valvoline! RP are real good... one of the best!

Who said its 100x better? The salesman who sold you the stuff? Wheres your evidence? lol >_<

Edited by Busky2k

not the salesman... but every one i have asked... every performance mechanic and tuner have recommended RP over Mobil 1 and other high end oils... even the wholesale rep who i spoke to today that sells Redline, RP and Motul to Autobarn and Repco... recommended the RP over the other oils he sells...

If you read back, even i was confused to which oil to buy... and i was about to get Mobil 1... but then after a few phone calls and few emails.. i have been advised differently...

Please done get me wrong... Mobil 1 Gold is a great oil but for its price... you better get RP which is race bread and proven... as i said before... its horses for courses... what works for one engine may not work for another...

Cheers

Edited by QRI05E
Ok guys, I emailed Royal Purple, regarding the grade/quality/group of their oils and they stated that they use a group V base and the rest is their Synerlec technology which has proven itself over and over again... even my mate's auto shop oil supplier who sells Motul, Red Line and RP said that RP was the best oil he has ever sold and used on his R33 GTR ~290aw/kw! Horses for courses I guess...

Today i picked up a 5L jug of Royal Purple 10W40 from Autobarn along with a Cooper oil filter... and hopfully ill get a chance this week to change the oil and will post the results...

Cheers,

Sarkis

No, RP is mostly group IV couple with mineral additives carrier fluid (possibly group I for total additives solubility). Alot of ppl in BITOG has criticize RP for it's lack of shear stability but UOA results always prove very well under high load and stress situation.

It's good oil but not 100x better than the rest i tell you.

Well after reading the last few pages i was going to go for the RP, to much of a hassle getting any by Monday as the stockists are out of the way big time. So i may settle for Mobil 1, dont know what weight to get though!!

Well at the *end of the day* we are splitting hairs because our engines would happily run on pretty much any synthetic oil with no problems. I am not doubting that RP is a good oil, I'd give it a go but there is alot of hype with oils unfortunately.

Paradizzle, I'd give the 10W30 in the M1 a go if you can find it. Or the 0W40, whatever is cheaper/easier.

I totaly agree Busky! as long as you run a decent synthetic oil with regular change (5000kms or every 3 months) your engine will love you for it!

I will post up my experiance with RP when i get a chance to change my oil hopfully this week..

Cheers

During my break at uni today I managed to take a quick trip down to Peps and Super Cheap... This is what I found (all are in 5L jugs):

Mobil 1 5W50 - $69

Mobil 1 GOLD 10W30 - $79

Royal Purple 10W40 (at Peps) - $75

Royal Purple 5W30 (at Peps) - $72

Castrol EDGE 0W40 - $70

Castrol EDGE 5W30 - $49

Valvoline SynPower 5W40 - $45

Wouldn't the choice go to Royal Purple for the high range? and the Valvoline Synpower for the low range?

What you think guys? or am i going around in circles chasing my tail? :D lol

I wouldn't mind spending $75 for the Royal Purple, but considering i change my Oil/Filter every 5000kms I think the Valvoline or Castrol for $45 - $50 would be a good choice...

Cheers,

Sarkis

Hi Hosay, unfortunately there are no Pep's outlets in melb... NSW only... you can buy Royal Purple from the following suppliers in melb:

Eagle Auto Spares

92 South Gippsland Hwy

DANDENONG

03 9793 5544

Sanmateo Performance Systems

19-21 Ninth Street

MILDURA

03 5023 7559

Regards,

Sarkis

Read through this thread and have seen conflicting stories - I just did my first oil change and apparantly the car was previously running Mobil 1 and was as quiet as a baby... did an oil change with 10w40 full synthetic (Nulon) and now my lifters are noisy! They were noisy straight away after it came off fast idle.

Should I go back to Mobil 1 and try 15w50? or perhaps this oil is shite and maybe try another 10w40?

Car has done 100,000 - R33 94 - also has an oil cooler and a smaller filter than normal (442).

Cheers,

Anna

Read through this thread and have seen conflicting stories - I just did my first oil change and apparantly the car was previously running Mobil 1 and was as quiet as a baby... did an oil change with 10w40 full synthetic (Nulon) and now my lifters are noisy! They were noisy straight away after it came off fast idle.

Should I go back to Mobil 1 and try 15w50? or perhaps this oil is shite and maybe try another 10w40?

Car has done 100,000 - R33 94 - also has an oil cooler and a smaller filter than normal (442).

Cheers,

Anna

Try the Mobil 1 again but 15w50 imo is maybe too thick. Try the M1 0w40, good stuffs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...