Jump to content
SAU Community

Recommended Posts

motul 81xx oils are all group IV (100% synthetic)

the 61xx and 41xx (which includes turbolight) are group III

i think it's important for people to remember that there is a difference between fully synthetic and 100% synthetic.

"fully synthetic" is NOT group IV and will have some mineral content

"100% synthetic" is Group IV or V and CAN NOT have ANY mineral content

motul 81xx oils are all group IV (100% synthetic)

in that case it sounds like x-cess is better value if it is as much as $20 cheaper at some places, also has a better cold viscosity, whether this means it has more additives and won't last as long I don't know.

Edited by Rolls

i think it's important for people to remember that there is a difference between fully synthetic and 100% synthetic.

"fully synthetic" is NOT group IV and will have some mineral content

"100% synthetic" is Group IV or V and CAN NOT have ANY mineral content

If that's the case, please explain the Nulon "100% Synthetic" 10w40 oil.

There is no way that shit is Group IV and there is no chance that shit is ever going anywhere near my wife's Magna again... let alone my Stagea!

nulon have a 100% synthetic range - doesn't mean it's good tho ;)

motul's 5w40 definately has more additives than the other.

in the 300v range all the oils can be mixed and matched for custom viscosities, EXCEPT 5w40

motul 81xx oils are all group IV (100% synthetic)

the 61xx and 41xx (which includes turbolight) are group III

i think it's important for people to remember that there is a difference between fully synthetic and 100% synthetic.

"fully synthetic" is NOT group IV and will have some mineral content

"100% synthetic" is Group IV or V and CAN NOT have ANY mineral content

Not so much mineral content...I believe that what information I could find indicated that it was ruled that some of the waxes they add to some oils can be called "synthetic", and therefore a "fully synthetic" oil only had to be 75% synth plus the other shit they let past.

If that's the case, please explain the Nulon "100% Synthetic" 10w40 oil.

There is no way that shit is Group IV and there is no chance that shit is ever going anywhere near my wife's Magna again... let alone my Stagea!

What problem did you have with it? I'm running it at the moment and haven't noticed any problems...will be doing a change soon too so I'll see what it looks like. changing at 4000km since the only bloody driving my car really sees is almost always on cold start map so I'm a little worried that I've farked the oil from fuel that hasn't evaporated. Drive to work only sees my water temp get to 65 - 70 deg

I was very close to trying that Nulon "synthetic" stuff after seeing the youtube video of the dyno testing other oils. But then the comments all mentioned the fan in front of the radiator and intercooler was 1-2 feet closer on the Nulon test only, thus explaining the gain in HP. Once I looked at it further and found out it's only Group 3 and not genuine synthetic at all I lost all interest and respect for it.

I was very close to trying that Nulon "synthetic" stuff after seeing the youtube video of the dyno testing other oils. But then the comments all mentioned the fan in front of the radiator and intercooler was 1-2 feet closer on the Nulon test only, thus explaining the gain in HP. Once I looked at it further and found out it's only Group 3 and not genuine synthetic at all I lost all interest and respect for it.

Yeah that test was a load of shit, lots of good comments on the video explaining why.

lol that reminds me of this demo thingy we have at work, it's a mobil thing with 2 tubes of oil and a ballbearing in each.

as you turn it upside down you see how much faster the ball falls in the tube filled with mobil 1 synthetic, as opposed to mineral oil

when you read the fine print however, the mobil oil is 0w40 vs 15w40 mineral oil

:down:

lol that reminds me of this demo thingy we have at work, it's a mobil thing with 2 tubes of oil and a ballbearing in each.

as you turn it upside down you see how much faster the ball falls in the tube filled with mobil 1 synthetic, as opposed to mineral oil

when you read the fine print however, the mobil oil is 0w40 vs 15w40 mineral oil

:down:

Bahahahahahahahahahahahahahahahahahaha. Companies are just so trustworthy, would never manipulate or try to fool anyone.

So much lol.

What problem did you have with it? I'm running it at the moment and haven't noticed any problems...will be doing a change soon too so I'll see what it looks like. changing at 4000km since the only bloody driving my car really sees is almost always on cold start map so I'm a little worried that I've farked the oil from fuel that hasn't evaporated. Drive to work only sees my water temp get to 65 - 70 deg

Only lasted 6000kms in my Wife's Magna (2003, 3.5 V6) which sits at 80-100kph on her daily drive to and from work (99.9% highway and 1 set of lights).

I do 10,000km changes but noticed a burned oil smell from her car one day (late Autumn/early Winter 2009)

Checked the oil level and at was juuust on the bare minimum.

Checked the engine bay for leaks but there were none.

Dropped the oil and it came out with chunks and an overwhelming burnt smell.

Never had an issue with Mobil 1 5w50 before nor after.

Like I said, won't ever touch Nulon oil again for her car, let alone touching the innards of my Stagea.

Only lasted 6000kms in my Wife's Magna (2003, 3.5 V6) which sits at 80-100kph on her daily drive to and from work (99.9% highway and 1 set of lights).

I do 10,000km changes but noticed a burned oil smell from her car one day (late Autumn/early Winter 2009)

Checked the oil level and at was juuust on the bare minimum.

Checked the engine bay for leaks but there were none.

Dropped the oil and it came out with chunks and an overwhelming burnt smell.

Never had an issue with Mobil 1 5w50 before nor after.

Like I said, won't ever touch Nulon oil again for her car, let alone touching the innards of my Stagea.

Fair enough fair enough. Mine's looking a little darker now than I'd expect for 4000km. I'll give it a change and a second chance to see how it looks this time round (got 2 5L bottles CHEEAAAP) so it's not too much of a worry dropping it again if it does the same thing. For now I'll give it the benefit of the doubt haha. Otherwise, the level hasn't dropped and I haven't smelt anything...

EDIT: I will add that I can hear very slight lifter noise where there hasn't been any before...

just threw some $15 gw 20w50 in my new daily (4age corolla with ~290,000kms) runs well

i don't think you can go past it for cheap higher km motors

just annoying that most cars take over 4 litres of oil tho

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...