Jump to content
SAU Community

Recommended Posts

What is the point in spending money on something that won't really help?

Because it does help. There's more to oil than just protection or engine longevity (but on that topic, a synthetic will last a lot longer than a mineral); I pay the extra for smoother performance alone. It's like HD vs normal TV: you will still see your show fine in non-HD, but why not enjoy it in a way that looks/feels better?

Birds: do you know much about Royal Purple 10w40? My mechanic is trying hard to flog it to me, as its slightly cheaper than Edge, and I can buy it by the litre. Also got given a copy of the infamous Street Commodores oil review (mechanic claimed that the threat of legal action was the reason for the article's retraction)

Print out the street commodores oil review, and then use it to wipe your ass.

Regular RP is a Group IV oil, XPR is Group V. If you can get RP cheaper than Edge, go for it. People seem to have alot of success with RP on here with their skylines, no negatives that I can remember.

Birds: do you know much about Royal Purple 10w40? My mechanic is trying hard to flog it to me, as its slightly cheaper than Edge, and I can buy it by the litre. Also got given a copy of the infamous Street Commodores oil review (mechanic claimed that the threat of legal action was the reason for the article's retraction)

No personal experience with it, but 10w40 is the favourite RB friendly grade and there have been a few on here using Royal Purple's rendition with good reports, so I'd say go for it.

Royal Purple is actually purple oil, i know because my mate puts it in his S15 and we were pouring his 5 left over bottle with about a liter in each into one bottle so it can be taken for a service. I was confused why and how they do it lol, purple additive ?

Edited by starwarz

using it in an LSx, not an RB lol, used to use Motul 8100 Xcess 10w40 in that.

Been reading an absolute shitload of LS forums and BITOG lately, the main evidence for the Edge comes via Steve from Mainlube, who has filtergrams to back up his claims that Edge 10w60 is second only to the Mainlube 10w60 engine oil. (as well as being in that field etc).

Was mostly concerned with whether the regular RP was in fact a Group 4, or whether it was still a 2/3 with a custom additive package (as far as I can read it has a lot of ZDDP and Moly in it).

Moodles2: on further reading, it appears that the Timken machine used for that test is actually meant for testing out greases not engine oils. Also half of the oils mentioned in that review no longer exist.

Moodles2: on further reading, it appears that the Timken machine used for that test is actually meant for testing out greases not engine oils. Also half of the oils mentioned in that review no longer exist.

You won't believe how many morons keep bringing up that street commodores oil review in this thread alone. Everytime pointed out it's a grease testing method.

The mechanic has a stack of copies of the article printed out (by RP by the looks of it) sitting on the counter lolz.

In the end, 10w40 RP HPR is about the same price as paying full retail for Edge 10w60, went with the Edge as Supercheap had their 20% off sale, and BITOG / LS1.com.au had more people who had empirical evidence of the Edge being a good oil rather than "it feels better".

The change from the mineral 25w50 to the Group 4 10w60 is noticeable though; all of the lifter noise on cold startup has gone and it seems to be able to rev more freely. (not anal enough to also get the UOA).

  • 2 weeks later...

Lets say the oil needs changing , according to manufacturers specs and isn't changed!

What noticeable signs or symptoms for the driver will show................( before the motor seizes and before significant damage.)

(I tend NOT to do the kilometres but tend to change beyond 6 months and more likely 12 months or more.One car is just used occasionally on weekend eg, 120km to coast and back, whilst the other is a daily but still less than 5000km a year)

Edited by samuri

Noisy lifters; engine runs/feels/idles rough; can make for a smokey exhaust from the oil breaking down. It can actually be a tough thing to notice until things get really bad. I've seen cars with no oil change for 75,000km and the driver hasn't noticed a thing (to be fair, driver was female). This is why I immediately scrap potential cars that say "lady owner" when I'm looking for cars. Lady owner doesn't mean treated kindly, it means not friggen serviced. I'll take the hoon with a bunch of service receipts thank you. Anyway...

The funny thing about oil being left in too long, is the point you get to where it is healthier to leave the unchanged oil in there for the rest of the engine's life. Like above in my 75,000km example, the engine internals had worn to a point where they depended on the sludgy oil to take up the slack...so removing this and replacing it with good oil actually made the engine noisy and more prone to failure lol.

This is why I'm against engine flushing with those engine cleaners...particularly with older engines. They are basically turpentine and kerosene mixes that removes good sludge from the engine. There are parts of the engine that new oil can't easily get to (or stay there) and you're removing the "good stuff" from there = bad!

Oil in a weekender car for a year won't kill it, though I wouldn't leave it much longer than a year before changing it...time kills fluids too.

+1 for not buying off woman drivers, i wouldnt mind a highly serviced but driven hard vehicle. As long as it hasnt seen the rev limiter. but lets be serious all our cars have been redlined in the past but a carnt who redlines it every second week can fark off.

+1 for not buying off woman drivers, i wouldnt mind a highly serviced but driven hard vehicle. As long as it hasnt seen the rev limiter. but lets be serious all our cars have been redlined in the past but a carnt who redlines it every second week can fark off.

Yes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...