Jump to content
SAU Community

Recommended Posts

I have absolutely no personal knowledge or insight - but googling around it looks like it could be a lubricant additive in your oil - http://www.bobistheo...e-oil-analysis/

Titanium

Titanium is a newer, more environmentally friendly anti-wear additive being implemented due to more stringent emissions regulations, and is phasing out the older, more harmful phosphorous compounds such as ZDDP (Zinc dialkyldithiophosphate). ZDDP reduces the effectiveness of the catalysts in catalytic converters by creating a plating effect when combusted, and covering the catalyst while Titanium does not. Titanium chemically binds to wear surfaces creating a hard, Titanium based oxide layer which reduces friction, thereby reducing wear. Concentration levels vary greatly depending on oil brand.

Looking a bit further, I found http://www.exxonmobi...UsedOilEval.pdf which talks about oil analysis, and mentions some negative reasons for titanium in oil tests:

Upward movement of Iron and Titanium and Chrome may indicate a spinning bearing outer race if the engine case is Titanium.

Don't think this is relevant for RB2X engines.

The last reference I found at http://www.lube-tips.com/focus/2006_08_30.htm

The presence of titanium in used oil analysis is generally a result of contamination from paint. This is often expected from new or rebuilt components such as gearboxes. Titanium can also result from wear of high alloy bearings, or high-quality steel in gears.

Anyway, hope I've found something useful.

Recently brought a 32 GTR, Fully rebuilt around 20,000k's ago. What oil would you recommend? Daily driver. Last service i put 10-50 motul in it.

Mobil 1 oil, always used it in mine from day one, never noisey, never changes colour, and no oil consumption, its impressed me, even with 300kw and ethanol its like honey on the dip stick... its 0w/40w

I thought having oil staying clean meant it wasn't cleaning the carbon/shit out of your engine?

i think thats more to do with your oil being contaminated by your blow by gases, so if your engines loose you'll have black oil sooner, mine would go dark after a number of dyno runs, but not with normal use...

im sure ill be corrected, now with ethanol it never gets dirty so must prove my point, but its still a clean oil whatever grade it is and has worked well for me.. my opinion only

i think thats more to do with your oil being contaminated by your blow by gases, so if your engines loose you'll have black oil sooner, mine would go dark after a number of dyno runs, but not with normal use...

im sure ill be corrected, now with ethanol it never gets dirty so must prove my point, but its still a clean oil whatever grade it is and has worked well for me.. my opinion only

Wat?

Mine is jet black after 500ks, sounds like there is no detergent in the oil.

[

Soot and carbon buildup are a byproduct of the combustion process, if the oil is still honey colored after 5000km then there is 2 possibilities I can think of. The engine is extremely clean by engine health (good compression etc) and the tune itself (not overly rich etc) or the engine oil by design has minimal detergents for cleaning

Soot and carbon buildup are a byproduct of the combustion process, if the oil is still honey colored after 5000km then there is 2 possibilities I can think of. The engine is extremely clean by engine health (good compression etc) and the tune itself (not overly rich etc) or the engine oil by design has minimal detergents for cleaning

As said before, every engine and setup must contribute heavily then... The engine has close to 200k on it, comp test 175average, zero oil consumption and definitely a rich tune, people driving behind must be getting tipsy lol, hope theres no RBT around as i drive by, they'd all be taken into custody..:)

I would of thought the soot was from the 98 having being made from oil products, ethanol is an alcohol so how can you get soot? it should literally clean the soot out the tail pipe?

  • 3 weeks later...

lol at the tipsy comment.

I've found it doesnt matter what i put thru my car, it used to always come out almost as clean as it went in after 5000km. but with time and some more Km's (almost 80k ive put on it now, total of 145k) it is getting a little dirtier every time. but still by no means black or even a solid color.

My angry old bug would turn the oil black within 2 mins of running after a change :P

I've now gone to the Penrite Ten Tenths, racing 10, 10-40 (stupid name). ive never used penrite before, whats everyone's thoughts? (ive done this due to availability in my local area.....im getting sick of chasing round the countryside look for the same oil everytime)

I've now gone to the Penrite Ten Tenths, racing 10, 10-40 (stupid name). ive never used penrite before, whats everyone's thoughts? (ive done this due to availability in my local area.....im getting sick of chasing round the countryside look for the same oil everytime)

reported to be very good and for a non 300+rwkw skyline that's not seeing the track is a great choice

Recently brought a 32 GTR, Fully rebuilt around 20,000k's ago. What oil would you recommend? Daily driver. Last service i put 10-50 motul in it.

whatever the engine builder reccomends

i think thats more to do with your oil being contaminated by your blow by gases, so if your engines loose you'll have black oil sooner, mine would go dark after a number of dyno runs, but not with normal use...

im sure ill be corrected, now with ethanol it never gets dirty so must prove my point, but its still a clean oil whatever grade it is and has worked well for me.. my opinion only

Your oil getting black is from the detergants 'cleaning' your engine, you certainly wouldn't want to be getting black oil just from blow by.

If you change oil only every 5,000km's it should be slightly black, by 10,000km's if it aint black I would be worried, either the engine is impossible clean or the oil aint cleaning sh*t.

I chnged my oil today and noticed that i used the whole 5l bottle but i couldn't see the oil covering the cams is that meant to be so i read a post where someone said they only use 3.4l.

It's a NEO engine .

Edited by B-rice

Your oil getting black is from the detergants 'cleaning' your engine, you certainly wouldn't want to be getting black oil just from blow by.

If you change oil only every 5,000km's it should be slightly black, by 10,000km's if it aint black I would be worried, either the engine is impossible clean or the oil aint cleaning sh*t.

Blowby is one of the reasons oil needs to contain detergents to 'clean' the engine.

http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=258648

If ring seal was perfect and combustion was complete, oil would last far longer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...