Jump to content
SAU Community

Recommended Posts

Ok chaps, it's like this.....

I have an R32 GTR, I have run 10.6@138mph in full street trim (full exh, street tyres, soundsystem pump fuel etc)... and I wan't to go faster BUT retain the same, if not better response for the street and track. I'm looking for low 10's in full street trim. I don't wan't to sacrifice weight or suspension, or upping the gas..... more power is my only option.

Previous set up: stock rb26 (still quite healthy) 396rwkw, T517Z 10cm's, 260 poncams, PFC, fuel syst, 50hp shot of N2O- at the track only NOT on the dyno, R3C and ppgdogbox, plus all the usual supporting mods... I ran on BFG street drag radials.

I have in stock, Tomei 2.8lt stroker kit, N1 block, ported head, 272 HKS cams etc....

What would YOU use for a turbo kit, maximising response on 98ron fuel, with a total power output around 450-460rwkw... I love my T517Z's but they were running 22psi flat out at 396rwkw.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/225836-rb28dett-turbo-choice/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

People with 440awkw, stock shift gearboxes etc ... and have have run 10.40 or better, so cut out a few 10ths of a sec due to the dog box, and you *should* be running low 10's already without changing a thing.

So IMO you already have what you need, you just need to drive it to the time the car can run rather than chase power.

You wont get better response by upgrading turbos larger, even if you are going a stroker. Any gain from the kit will be well offset by the turbos.

If anything, just get a T04z, will do over 400rwkw on PULP.

If you can't run a 10.1 with a trap speed of 138mph then more power is not going to help you. You need to improve the vehicles dynamics and maybe driving style. The car has got it in it already, you just gotta bring it out.

What was the 60footer time?

People with 440awkw, stock shift gearboxes etc ... and have have run 10.40 or better, so cut out a few 10ths of a sec due to the dog box, and you *should* be running low 10's already without changing a thing.

So IMO you already have what you need, you just need to drive it to the time the car can run rather than chase power.

You wont get better response by upgrading turbos larger, even if you are going a stroker. Any gain from the kit will be well offset by the turbos.

If anything, just get a T04z, will do over 400rwkw on PULP.

im suprised you didnt point it out.. but twoogle's runs were 10.3 at 134mph with his 2530's and its been 9.7's i believe at 139mph.. so this blokes definately got a low/flat 10 in his car already seeing as he's doin 138mph.. i wonder if he knows about the 140+mph thing with andra which is why paul holds twoogle in third in twoogle across the line for the 139mph

im suprised you didnt point it out.. but twoogle's runs were 10.3 at 134mph with his 2530's and its been 9.7's i believe at 139mph.. so this blokes definately got a low/flat 10 in his car already seeing as he's doin 138mph.. i wonder if he knows about the 140+mph thing with andra which is why paul holds twoogle in third in across the line for the 139mph

this man speaks the truth...sort of...lol

correcting a couple of things said in thread...

Ash i assume the 440kw stock shift etc is me...i never raced with 440kw thats just a dyno comp figure (34psi, when racing we only ran 28psi) the car was raced with around 400-410kw.

rb26s13 you are slightly off the mark with the time stated...9.9's @ 139MPH but thanks anyway. Our car was capable of running quicker but couldnt race it to its full potential due to the ANDRA 140 MPH rule.

I think if you go GT-RS's and are willing to rev it (9500rpm) you could run a 9 with that MPH or at least a very low 10. You would have to get the cars weight including driver to around 1475kg to do the 9 though. Although you do have the dogbox so you might get away with being over 1500kg. Our car was almost as responsive as Racepace's 2.9ltr and was all over it in the midrange and ours was only running a STD nissan crank. So RS's are the proven route i think. Our car also easily made 455KW at the wheels at Newcastle Autosalon on 20psi with BP98 and over 500KW at final battle on Sunoco race fuel.

Edited by DiRTgarage
this man speaks the truth...sort of...lol

correcting a couple of things said in thread...

Ash i assume the 440kw stock shift etc is me...i never raced with 440kw thats just a dyno comp figure (34psi, when racing we only ran 28psi) the car was raced with around 400-410kw.

rb26s13 you are slightly off the mark with the time stated...9.9's @ 139MPH but thanks anyway. Our car was capable of running quicker but couldnt race it to its full potential due to the ANDRA 140 MPH rule.

I think if you go GT-RS's and are willing to rev it (9500rpm) you could run a 9 with that MPH or at least a very low 10. You would have to get the cars weight including driver to around 1475kg to do the 9 though. Although you do have the dogbox so you might get away with being over 1500kg. Our car was almost as responsive as Racepace's 2.9ltr and was all over it in the midrange and ours was only running a STD nissan crank. So RS's are the proven route i think. Our car also easily made 455KW at the wheels at Newcastle Autosalon on 20psi with BP98 and over 500KW at final battle on Sunoco race fuel.

come on.. it had a 7 in it somewhere 9.97 maybe? meh i cbf thinking to hungover i just remember one of your runs was 139mph and was a 9 but had a 7 after the 9. somewhere

come on.. it had a 7 in it somewhere 9.97 maybe? meh i cbf thinking to hungover i just remember one of your runs was 139mph and was a 9 but had a 7 after the 9. somewhere

9.97...spot on...PB is 9.95 @ 139.6 MPH....0.4MPH from being logged for no parachute. The day the ignition DVD was filmed (WSID bracket meeting) ran back to back 9.96-9.97 then when they turned up with the camera's and insisted on massive burnouts the times went 10.0's. The last run of the day the ANDRA stewards allowed me to have one pass that they would turn a blind eye to (in regard to MPH) as it was bleeding obvious that i was holding 3rd too long. So with PB's to the 330 and the 660 in both ET and MPH on the run I looked set for a 9.8* at 140+ MPH i went to shift it into 3rd and the bastard would not go in and rolled over the line with my foot on the clutch....it ended up a 10.1 at 129 MPH.

Thats why you can see me rip my gloves off and throw them in the in-car footage on the DVD

Back on topic...a HKS T51R KAI BB has very similar charateristics to twin HKS GT-RS's in regard to airflow, power output and efficiency. On a 2.8ltr that would be my 2nd choice.

Edited by DiRTgarage
He wants response!

T04Z. On song by 4000rpm for the win.

we have a to4z on our circiut car...its laggier than the drag car and doesnt make the power, might be ok on a 2.8 ltr though.

Edited by DiRTgarage
this man speaks the truth...sort of...lol

correcting a couple of things said in thread...

Ash i assume the 440kw stock shift etc is me...i never raced with 440kw thats just a dyno comp figure (34psi, when racing we only ran 28psi) the car was raced with around 400-410kw.

rb26s13 you are slightly off the mark with the time stated...9.9's @ 139MPH but thanks anyway. Our car was capable of running quicker but couldnt race it to its full potential due to the ANDRA 140 MPH rule.

I think if you go GT-RS's and are willing to rev it (9500rpm) you could run a 9 with that MPH or at least a very low 10. You would have to get the cars weight including driver to around 1475kg to do the 9 though. Although you do have the dogbox so you might get away with being over 1500kg. Our car was almost as responsive as Racepace's 2.9ltr and was all over it in the midrange and ours was only running a STD nissan crank. So RS's are the proven route i think. Our car also easily made 455KW at the wheels at Newcastle Autosalon on 20psi with BP98 and over 500KW at final battle on Sunoco race fuel.

Cheers for all the input guys.

I might look into GT-RS's then. I don't really fancy a big top mount. Even though they look sweeeet!

Mr DGarage, I remember reading somwhere that you run "modified" GT-RS's. Was that for response or for more top end??? who did them?

Do you have a dyno sheet posted up anywhere I can have a quiz at?

Cheers

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...