Jump to content
SAU Community

Recommended Posts

I have a very basic knowledge of how atmospheric & plumb back BOV's work, but what I am wondering is how do you go about choosing one that is best suited for your style of driving. i.e. normal street driving, drag, or drift. Is there one type that is best suited for a specific purpose? or is it mearly "that looks good, I like that one" :D Also would the type of BOV depend on the turbo and the amount of horse power it produces?

Edited by Nimmo
Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/
Share on other sites

agreed with the above and it wont get you in any trouble with the law! doesn't really matter on the type of application e.g drifitn/drag etc, if you want a strong reliable bov that has both plumb back or vent to atmosphere, go something like the GBS stealth FX. H

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4026294
Share on other sites

Im also a rookie so go easy :P....I bought my car with an atmo blow off and 3.5inch exhaust...id like to attract a LIL less attention lol

The blow off is FREAKIN loud...do different brands and models of Atmo bovs make a louder noise? As in can i get a different atmo blowoff so that i can keep that rice pssst that you guys all hate so much...but not as loud? or should i just go back to std?

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4026872
Share on other sites

if its a Turbosmart one (like mine) you can twist the end of the BOV in to make the noise 'softer', or out to make it 'harder'. When it's on soft, you won't get that noise unless you're on WOT just about, and the other extreme, well you dont get any dosing at all, its a constant pschhh every time you lift your foot off the throttle.

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4027050
Share on other sites

Hey guys, I don't want to steal this thread but I also don't want to make another topic ...so please forgive my questions nimmo and i'll try to keep it short...

1. How much boost or rwkw can a gtst bov take?

2.I changed my gtst bov to a gtr as I have a bigger turbo... but I want a little more noise (not huge) because I can barely hear the gtr one... anyway to get it abit louder without going atmo?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4028041
Share on other sites

Hey guys, I don't want to steal this thread but I also don't want to make another topic ...so please forgive my questions nimmo and i'll try to keep it short...

No problem WYTSKY I have gotten my answers, thanks guys you have cleared up alot for me. :D

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4028194
Share on other sites

Im also a rookie so go easy :D ....I bought my car with an atmo blow off and 3.5inch exhaust...id like to attract a LIL less attention lol

The blow off is FREAKIN loud...do different brands and models of Atmo bovs make a louder noise? As in can i get a different atmo blowoff so that i can keep that rice pssst that you guys all hate so much...but not as loud? or should i just go back to std?

Get your mechanic to remove the aftermarket BOV and install the standard one back on, then install an air pod and you will get the nice 'choo' noise and a wicked sucking noise.

Aftermarket BOV do F*** all and just makes noise.

Only time I would use an aftermarket one is on a track, drift car when running very high boost or push the GTR one before the limit.

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4028477
Share on other sites

Adriano if you are talking to me I already have a pod and apexi power intake... I want the sound as loud as the gtst was on mine... but with a bigger turbo now running about 12-14psi and in my next tune I may be going higher and power levels will be roughly 250rwkw... didn't know if the gtst one would take it so I put on a gtr one...

Link to comment
https://www.sau.com.au/forums/topic/228980-bovs-which-one/#findComment-4029130
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...