Jump to content
SAU Community

Another "which Oil?" Topic

cjfb

By cjfb,
in General Maintenance

 Share

Recommended Posts

cjfb Apprentice

cjfb

Posted
Posted

Sorry to ask a question that’s been done to death, but after doing all the research I could I still can’t come up with a definitive answer about what type of oil I should be using.

This is my first car and I’ve only had it for about a month, so I’m about as uninformed as they come.

-My car is a pretty much stock R33 GTS25-t Sedan.

-It’s done just over 100,000 k and the engine seems to be in pretty decent condition.

-I don’t use it on tracks and rarely ever push it above 4000rpm

-I’m currently using it for 30k trips to & from work 5 days a week, other than that I mostly use it for quick 5-10 minute trips.

-I live in Perth, so the lowest the temp gets to here is about 1 or 2 degrees on a winter morning.

I was about to go and buy some Mobil 1 5w50 but a bit more reading told me that I’m probably better off with Mobil 1 0w40 or 10w30, seeing as I don’t use it on tracks or anything. If recommended I’m willing to fork out a bit more for some Royal Purple or something, but it apparently that would be slight overkill for how I use my car.

Any advice would be awesome. Thanks.

Link to comment
https://www.sau.com.au/forums/topic/229471-another-which-oil-topic/
Share on other sites
Wacky Dee Veteran

Wacky Dee

Posted
Posted

from what I've been told by my mechanic whome I trust (unigroup) 10W40 is the right viscosity for a R34 GTT with 64k ... which is pretty similar to your car.

They reckon all the brand name fuss is a lot of nonsense and if you change the oil every 5000k it really doesn't matter which brand .. they use 'Hi-tec' which I believe is a local brand.

moobaque Rising Star

moobaque

Posted
Posted
from what I've been told by my mechanic whome I trust (unigroup) 10W40 is the right viscosity for a R34 GTT with 64k ... which is pretty similar to your car.

They reckon all the brand name fuss is a lot of nonsense and if you change the oil every 5000k it really doesn't matter which brand .. they use 'Hi-tec' which I believe is a local brand.

I agree that if its for street driving (at low to mid rpm) cheap oil is an ok option as long as you are doing changes every 5k and no more! If you do ever decide you want to track it (or drive on the freeway in 2nd) don't go cheap on oil as you want something thats not going to break down at high engine temps.

I would say tho try and stick with fully synthetics and a 10w40 would be a quite adequate weight for street driving although i personally go 5w50 (mobil 1 fully synthetic) But i do use it on the track...i also over fill by about 500ml to try and stop potential starvation at high rpm/fast cornering.

Cheers

Cam

blind_elk Grand Master

blind_elk

Posted
Posted

You won't go wrong with:

Brand - any name brand ie Mobil, Shell, Castrol, etc

Type - Full Synthetic

API rating - SJ (minimum, current is SM)

SAE (Grade): First digits (for starting) - 0W, 5W, 10W / Last Digits (for running) - 40

charlie25T Proficient

charlie25T

Posted
Posted

For a skyline ................Semi Synthetic is better than full synthetic....

Were are talking about motor that are 12yr +...............

Unless you have a forged motor

then we are talking different

cjfb Apprentice

cjfb

Posted
  • Author
Posted

Arrg so many differring recommendations/opinions. :blink:

I was sure that fully synthetic was definitely the way to go... but now i'm told semi-synthetic?

As for viscosity, I'm now looking at 10w40. Is that a good choice for an RB25DET engine that's gone 100,000k?

Kinks Grand Master

Kinks

Posted
Posted
Arrg so many differring recommendations/opinions. :thumbsup:

it's simple, just use <your favourite brand here> oil.

seriously, any good quality full synthetic oil will do great. the minor differences are probably all in your head, the only consistent thing i notice is that the car seems to run nicer on FRESH oil.

Tried Motul, ELF, Nulon, Mobil 1 etc... the only thing better than any of these would be an oil that reverses the wear on your engine and that ain't happening! :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...