Jump to content
SAU Community

Recommended Posts

need sum help guys i done a rb25 conversion got the engine to run pulled it out and painted my car. i refitted the 25 and it just cranks over and ive got no spark or injector pulse. ive tried different cas, ecus and replaced the ignitor module. ive check continuity on all the ecu pin outs. ive check every sensor for power and earth and still not a thing any ideas? its starting to really shit me

Link to comment
https://www.sau.com.au/forums/topic/231437-rb25det-wont-start/
Share on other sites

if you are getting power to the injectors and coils i'd be making sure a pin hasn't backed out of a plug somwhere. other then that you've replaced everything that could cause it. double check all the power supplies at your computer again and check if you are getting a pulse on the injector outputs.

Unplug EVERYTHING (and I mean EVERYTHING)

THEN, Plug it all back in.

Seriously, don't just do one or two plugs, do EVERY SINGLE plug.

You'll find you've left one plug out, or a relay out, or a fuse.

When you redo it, it'll all be sweet.

  • 4 weeks later...

I had the exact same symptomes as you except my car left me stranded 2 hours from home. Parked it and it wouldn't start. It would crank and crank, but not even a sputter. My MAF was working properly and I was getting fuel because I could smell it. After checking every plug, nothing got it to work. I replaced the ignitor module with a known good one, still didn't fire at all. Went to check for spark and as we were checking, for spark with 3 of the coils pulled and the other 3 on the engine, the engine tried to start with 3 cylinders firing and the one plug out was sparking too. Turned out that somehow the power was getting grounded before the coils or wasn't getting grounded at all. After inspection, I still couldn't find anything wrong with the coilpack harness, but it started up and drove all the way home without issue. Totally pissed me off mostly because there was "nothing wrong". Readjust the coilpack harness and confirm the ground loop on the rear coilpack assembly bolt. At least it's free! :(

Edited by Darius

have you checked the two basic things?

fuel and spark?

Are the injectors opening, get the special injector bulb that clips into the injector plug and crank it over, make sure the light pulses (proving that you are getting both constant power and signal to the injectors)

Check the fuel pump is actually priming the rail, undo the fuel line and turn the car onto the on position and physically watch fuel come out.

Take out a coil, with the spark plug still in it, earth the plug out and crank the car over to make sure there definately is a strong spark.

If its got fuel and spark there should be atleast a kick out of it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...