Jump to content
SAU Community

Recommended Posts

hey just got a high mount manifold and got 700cc injectors and

power fc and full 3in just trying to work out what turbo i should use

have been thinking of a gt30r with .63 rear housing but wat are ur appinions.

i dont want it to be to laggy but still want it to hi boost hard

sorta a street car and drift pig i'm going for

just let me know what u all think

thanks blocka

Link to comment
https://www.sau.com.au/forums/topic/232287-rb20det-what-turbo-should-i-use/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Well laggy +GT30 frame + RB20 = laggy no matter what you do mate. Thats how it is.

If you want it to hit boost hard, i suggest a older T3 bush bearing hi-flow. probably the best turbo to be....

It goes like this... nothing... nothing... nothing... HIT HARD BOOST VTEC yO!

However, if you want a decent setup that is responsive, makes the RB20 look like a reasonable motor etc

HKS 2530 is the winner of the battle, 220rwkw with as much of a 'broad' range as you'll get. Anything bigger and your not going to see anything before 4000rpm

Thats just my thoughts anyhow. Im a response setup person

hey just got a high mount manifold and got 700cc injectors and

power fc and full 3in just trying to work out what turbo i should use

have been thinking of a gt30r with .63 rear housing but wat are ur appinions.

i dont want it to be to laggy but still want it to hi boost hard

sorta a street car and drift pig i'm going for

just let me know what u all think

thanks blocka

+1 on the HKS 2530 setup.

If you want something a little different and you are willing to adapt, anything like a 2860RS, 2871R etc will do. Just need to adapt to the manifold and dump etc. Same as if you were going for the 30R.

With the right head setup, a 30R with a .6 rear will see 1 bar before 4500. There are a few better options for better response in that range though. External gated 3076R or 3071R, these are more responsive than the 30R due to the smaller turbine wheel but still retain a good sized compressor for overall hp.

lol

whats funny?

do you think the calibration on a dyno will always be accurate?

on my tacho on the street it was showing me i was making full boost just befor 4k, dyno showed it to be just after 4200 and the rev limit went to 7800 where the ecu was set to 7200.

3071 or 3076 with .63 rear externally gated sounds pretty good or wat about a 3037 with a .63 or .7 rear and a .6 front

i know that with the rb20 i wont get to much so i will eventually do a 25/30 combo but that wont happen for about a year

so how much would i be looking at and where can i get one

Edited by blockasR32
I had a GT30 0.63 sitting there for my 20.

Sold it and purchased a Trust TD06L2.

The guy who purchased the GT30 put it on a 20, made 240rwkw on 20psi.

I make 277rwkw on 18psi with heaps left in the thing.

that doesn't sound right for a GT3076R.

you must've had the smaller version GT3071R (with smaller/cropped turbine wheel) or the tune was bad.

that doesn't sound right for a GT3076R.

you must've had the smaller version GT3071R (with smaller/cropped turbine wheel) or the tune was bad.

It was not a 3076 or 71, it was the 3082, and I never used it.

The guy who bought it reckons his ecu he was using could not handle it......(strange for an aftermarket ecu :D, you are correct that something was holding it back however; my finger points at tune)

there are only two opitions in my mind for a rb20

1. 2530 GTRS

2. TD06LS

both excellent response with great power

if u want to do 25/30 save your money and do it properly stick with the stock turbo till u build it

there are only two opitions in my mind for a rb20

1. 2530 GTRS

2. TD06LS

both excellent response with great power

if u want to do 25/30 save your money and do it properly stick with the stock turbo till u build it

go the HKS 2530 i got a t04 on mine and is laggy as all hell

I had a GT30 0.63 sitting there for my 20.

Sold it and purchased a Trust TD06L2.

The guy who purchased the GT30 put it on a 20, made 240rwkw on 20psi.

I make 277rwkw on 18psi with heaps left in the thing.

L2 is gods gift to RB20... end of story.

there are only two opitions in my mind for a rb20

1. 2530 GTRS

2. TD06LS

both excellent response with great power

if u want to do 25/30 save your money and do it properly stick with the stock turbo till u build it

Just so people dont get carried away with expectation....there is nothing excellent about the response of a TD06 or GT-RS on an RB20. The 2530 is marginally better through the lower rpm range but loses out big time up top.

So, I agree with the saving money for the 25/30, if you are not going to be happy with puinchy 200rwkws or laggier 250rwks odd and will end up going 30...then just save your coin.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...