Jump to content
SAU Community

Recommended Posts

need to get new pads n rotors for the stag. the guy i bought it off said hed put new pads on it but obviously didnt as they wore through the other day. ive heard the s model runs slightly bigger brakes? can anyone recomend where to go in adelaide or what will fit ect.

need urgent, my only car at the moment. thats drivable anyway :laugh:

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/
Share on other sites

so can i get factory pads n rotors from nissan?

If they are the same as my RS4T then:

Front rotors: DBA 4909SR and DBA4909SL (left and right) ...no longer certain about numbers for rears. BUT check prices and dimensions (esp offset on rears) before you buy.

I think they are the same as S14 200SX (if they are more common in Australia)

But double check... thre has been much confusion

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4115699
Share on other sites

A guy on ebay sells pads for $195 delivered. His listing is finished but I've seen it a few times. His nick is "agoodvib" and the link to his completed listing is http://cgi.ebay.com.au/NISSAN-STAGEA-WGC34...1QQcmdZViewItem

hope that helps.

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4115830
Share on other sites

S2's a a bit different but how much did they charge you by the way? All 4 corners?

ABS brake services city branch (in adelaide) got me a set of pads in for the front of my 97 s1 stagea within a couple of hours. And they are Lucas Premium pads so they are not to bad....
Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4116430
Share on other sites

ok i found the genuine pads for bout $200 but guy at sprint said he could do lucas for $100 set.

the dba 4909sr is looking promising. nissan said the 4 must stand for 4000 series? 909 is the rotor and sr stans for sloted rotor, but hes unsure if its the right one.

i gave the number to sprint he said that sounds bout right and he could get them but for twice the price as i could. and that was from qweensland friction manufactures. can anyone else add to this to confirm these rotors fitting cause i wont be able to return them.

by the way i would take them off and have them matched up but its the only car i got roadworthy at the moment.

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4119181
Share on other sites

ok i found the genuine pads for bout $200 but guy at sprint said he could do lucas for $100 set.

the dba 4909sr is looking promising. nissan said the 4 must stand for 4000 series? 909 is the rotor and sr stans for sloted rotor, but hes unsure if its the right one.

i gave the number to sprint he said that sounds bout right and he could get them but for twice the price as i could. and that was from qweensland friction manufactures. can anyone else add to this to confirm these rotors fitting cause i wont be able to return them.

by the way i would take them off and have them matched up but its the only car i got roadworthy at the moment.

These are for front only. S = slotted l=left r=right a= heat treated (optional, more expensive but better). I believe these are made in Australia so you may be able to track down the manufacturer or else try some other auto parts places (not Nissan).

p.s. If you are on a budget (for now) and not intending to hammer the brakes you could see if the rotors could be machined.

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4120299
Share on other sites

Lucas pads FTW!!!!

They are pre-baked so the break in period is bugger all compared to other pads. Not too dusty either IMO.

A member here in WA gets his brake pads rebonded for about $60 per set so maybe PM chuckie for future reference.

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4123721
Share on other sites

  • 2 weeks later...

ok the rotors took two weeks but finally here. ive just sat one of them over the ones that are currently on my car and they seem to be 1 maybe 2 mm smaller, but i do have a big lip on the edge so f*k nows. im having troble geting the original ones off ive bashed em slide hammerd em sprayed em WTF. i dont have to take the hub nut off do i?

has anyone else had to bash em off? they do look fairly corroded around the inner edge.

lucas pads no is db1439 off navara.

DBA 4909SR is what i ordered from nissan QFM slot em.

any hints or tips on getting these rotors off asap appreciated

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4159484
Share on other sites

ok ok ok. this is f**kt up. went out and with a bit of frustration i got the rotors off. then put new ones on then went to put pads on and the lucas pads no i just gave to yas is no good. they look the part but there about 3mm to long and wont fit the calipers. so now im putting my shitty brakes bak togetha and back to were i began. ;):D:):bunny::bunny::bunny::):down:

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4159521
Share on other sites

Shoulda checked the brake sticky dude, we just covered S2 stagea rotors. The front rotor is 49mm offset not 54 like silvia/skyline.

The only rotors i could find that would fit are genuine nissan or imported from japan specifically for S2 stageas.

DBA dont make a rotor that fits.

I fitted dixcel slotted rotors and wedsport sc pads.

Link to comment
https://www.sau.com.au/forums/topic/234882-rs4s-brakes/#findComment-4168704
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...