Jump to content
SAU Community

Recommended Posts

well, my dad works in the industry and months ago he told me not to even bother with a 15year old car as they rule would be changed for sure. Everyone in the industry seems to think that the change that has just gone underway is to give them more time to pass legislation to stop 15year vehicles all toghether.

You have to realise that some very powerful people and groups are against these vehicles coming in.

Think about any lobby groups who are for road safety.... GTR's for 16k isnt going to help safety, now they are affordable to lots of people.

Also companies like Toyota/Lexus and Nissan. They would have their dealers screaming at them as there aus delivered 300zx's are going to worth even less to sell and the LS400's which now go for around 20k will only be worth 12k. Again, same with Mazda and the MX5.

This will lead to loss of jobs (something the government doesnt want) and loss of taxes..... and its obviously big enough to offset any import tax they get.. or they wouldnt do it... all they want is MONEY... same with new SEVS rules... they would have had to have had a lot of pressure to change it as it cuts out a fair bit of revenue.

  • Replies 153
  • Created
  • Last Reply

Top Posters In This Topic

exactly right there dAVE.. when you start bringing in the versions of the cars that australia largely shoulda got in the first place back then, at a price that makes any locally sold vehicle seem overpriced and underpowered - it really cuts a hole in the 2nd hand dealers market, and frankly their pocket.

Even a few low priced cars can be enough to tip the scales enough for it to be a concern for them.

Already it must be pretty hard to sell a buyer a new 350zx, RX8 or newish S15 when you can go out and buy an equivalent powered Nissan car for 1/2 to 1/3 the price, even though it won't be new.

Holden would be screaming for a start, its kind of hard to convince joe public that their HSV is the "ultimate" sports coupe on the road under $100k, when there are a crapload of Skylines out there for 1/4 of the price that will kick their ass :P

Cant work out what ALL the fuss is about,Whats a 15Y/o 32 SkylineGTST going to cost you?

Car cost -250-350.oooYen @$4800 AUD

Import Duty/ GST/freight $3400AUD

State Compliance/ service/engineer sign off ect$2000AUD

Licence/stamp duty $l600 AUD

TOTAL $10800AUD

This is excluding a "BEND OVER FEE" from your Broker and any paint/panel and major mechanical repairs, remembering you are dealing with a 15Y/O vehicle so clutches and turbos are not un-likely.

So in reality its probably going to owe [email protected].......

Lets look at the Sunday papers or Autotrader mags now shal We

1995 Skyline GTST with mods @17.500K

1993'' '' @13.500 with out stereo"big deal"

1994" " @16.500 from a yard with 3Ywarranty

1996" " @20.500K

1994" " @16.000K

These are all licecnced/complianced/and have decent mods ie:Rims ,exhaust ,PFC, suspention,kits ect. they are also "tangable" you can drive them and have them inspected no Russian roulet here.

This makes the 15Y/O option a bit lame....It also makes the vehicles imported under the RAW scheme look very un-financial ie;

1995 RAW Skyline GTST [email protected] with NO mods at all!!!!

Give it some serious thought, forget importing as there are bargains to be had without the headaches and without paying for the brokers new 750K house!!!!!!

These are all licecnced/complianced/and have decent mods ie:Rims ,exhaust ,PFC, suspention,kits ect. they are also "tangable" you can drive them and have them inspected no Russian roulet here.

lol, you obviously haven't heard the amount of people that have been burnt via buying a dealer car. Many of the dealer cars are major accident repaired cars, brought in and fixed on the cheap. You *always* get what you pay for....

I hear you, although I think the probability of importing a 15Y/O vehicle with accident repair damage is greater than more current models and you can allways check out the local stuff yourself! as you get what you pay for.....or is it you get what you can see for yourself!!

Dude a 1989 GTR32 with full topsecret mods, veilside kit ,18"works alloys, full spec electronic controllers, mint paint and never seen a paint shop, only driven on Sundays by a Nun ,dont really exist!!!!! regardless of what your so called "Brokers" have to say!!

The vast majority are full spec ex-drift cars and most have had more hits than" Tina Turner" and driffted up Roko mountain to with-in an inch of there lives. But if you can find one from the Osaka church drift club let me know!!!

Hey Regan.

Living in WA must be an arse raping expierence.

Here in SA it doesn't cost anywhere near that much to get a 15yr old import on the road.

Side intrusion bars are THE most expensive part of it and even they only cost 500 with an engineers certificate.

Basically we can do the whole lot for around $1100-$1500 +stamp duty and rego. Thats it.

Once ya have ya car that is.

Now all of the cars i have brought in, have been great cars.

I know this because EVERYONE of them is still on the road, not requiring any major work. All of the ppl i have sold them i still speak to and see.

Glenn

P.s. All these warranties are, are insurance policies. They are backed by basically insurance companies. There is a limit to how much you can claim aswell.

The yards usually figure it into the price.

Mr-s413bt, i can get a 15yr old car reg in W.a for around that price of even less.

regan; IMporting is a RISK, but u will find most import cars in australia would have been "Hit very hard", i have not once seen one import driver who doesnt hit his/her car hard or drift it crazy.

Importing a 15yr old car, is good for cars like GTR, and other high-mod cars cuz their is no cost in removing the mods. Also the new import system was ment 2 have that affect on the market, so australia firms didn't lose money.

I wonder if you could find a "SHOW CAR" type GTR i bet it wouldnt have been Hit that hard hehehe:D

At the moment Soulja - Lets see you try and do it for less than 1500 bucks commercially when Transport introduce their new registration guidelines - It'll be of SUTI standard - with full belt changes, intrusion bars, new cats, filler neck restrictors the works - and an engineer sign off on the whole car - I do believe that'll cost a bit.

Jash

The cost will be more like $1,500 to $2,000 at least.

Side intrusion bars $500,

Seat belts $200,

Cat $200,

Tyres $250,

Engineer sign off $150,

Fillerneck inc labour$120,

Service $140,

Inspection $130,

Rego $250,

Plus u/s parts $150+.

These are prices what we paid day in day out not pulled out of my arse so I know what I am talking about.

A friend in the transport department wont help pay the bills or pass it as they are all going to be trained what not to pass from big turbos, BOV's to even boost conrolers.

Dont say it wont happen just like people said the 15 year rule wont be changed.

The prices where from NSW now I am in Perth lucky for us one of the partners is a automotive engineer ooh save $200 so it wont make much of a diference.

I am class 2 cert welder so I can make side intrusion bars which also helps.

When it comes in next month here some imported un registered cars will be going cheap.

Hey DRIFTT.

Yeah basically you get a full inspection here.

We need to take basically everything to get our cars through aswell. Gauges, boost controllers, turbo timers, aftermarket steering wheels and gear knobs, um strut braces, no coil over suspension.

It can be a bit distressing at times! lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any update on this one? did you manage to get it fixed?    i'm having the same issue with my r34 and i believe its to do with the smart entry (keyless) control module but cant be sure without forking out to get a replacement  
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if something was binding the shaft from rotating properly. I got absolutely no voltage reading out of the sensor no matter how fast I turned the shaft. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if shttps://imgur.com/6TQCG3xomething was binding the shaft from rotating properly. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
×
×
  • Create New...