Jump to content
SAU Community

Recommended Posts

How manny killer wasps does your 33 make before melting into the tarmac, champ?

I wouldn't worry about the oil changing colour too much at all. Even synthetic will turn black - especially if the cleaning agents in most street engine oils are doing their thing.

Once it goes back together Adrian, Kon's expecting somewhere between 450 - 480 hot ponies from it at the tarmac melting stage... It already lights third on the roll before it came apart again... :ninja:

But, I don't see what this has to do with a sensor on a car, that affects absolutely nothing in the way of the tune, and hence, won't affect power, or driveability.

Edited by MBS206
  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Once it goes back together Adrian, Kon's expecting somewhere between 450 - 480 hot ponies from it at the tarmac melting stage... It already lights third on the roll before it came apart again... :)

But, I don't see what this has to do with a sensor on a car, that affects absolutely nothing in the way of the tune, and hence, won't affect power, or driveability.

The point is you're arcing up hard over someone else's car and giving yourself a brain aneurysm for your trouble. Relax and let people think what they want.

:O

hey guys can we keep this on topic? this is the 2nd thread that cara has started as the first one went awol.

cheers

If Cara could find the real problem, and then post her dyno "figures" and then back up the power with a good MPH, not an issue...

Until then, those who know, are just sitting back pissing themselves laughing at her for believing the knock sensors are the culprit.

Come on Cara, dyno it, and then drag it!

I just think Matts frustration is stemming from the fact that the Power FC doesn't rescale the ignition map based on a knock sensor input. This has been known for years and years and is the biggest gripe people have with the PFC is that it doesn't respond to the knock signal like a factory ECU would....all it does is flash a pretty light at you and politely inform you the engine is pinging its nuts off.

And I quote from one of the PFC forums "the power fc has no control or measures against knock"

So the act of Cara replacing a knock sensor and then getting power back is perplexing at best. All I think is being said here is there must be some underlying issue that has not yet been found. Even bad fuel can have a really marked effect on a borderline tune. I've had a week of about -20rwkw after I filled up with something other than optimax/BP ultimate.

why is it sooo important for me to post up my figures for you? so u can turn around and say "look i told you so?" mate go fu** urself i dont have to prove anything to you or anything else.

im sick of this shit and my threads hijacked. i will not post one thing ever again in the n/a section due to people thinking that they know more about my car than my tuner.

I WANT THIS THREAD LOCKED NOW.

u can all get stuffed.

and Eug, this is not directed at u or any one else, the people that this is directed at now who they are,

Edited by MissR34

*Yawn* Nice Tanty...

As to why you "must" (PS, I never said you had to) I'd just like to see a touch of evidence that your missing power is back from something that can't affect it.

MissR34: You seem very stuck up personally to me, and stubborn. You're unable to listen to those who KNOW what can and can't affect your PowerFC to alter it's fuelling and timing.

Those of us who have told you the Knock sensors can't "fix" this missing power, would like to see how you magically got it back.

Oh, and the last person I saw throw a tanty like that was about oh... 5 years old, and an only child...

You really need to be less defensive of everything, open your eyes, and accept some Constructive Criticism. If you do, you might find your issue with the missing power.

Hell, it could be just a set of plugs fouled, it could be bad fuel, your AFM might be stuffing up and want cleaning, you could have a vac leak. But there is no chance, knock sensors will affect the PFC. If you accept this, then those of us here, can help you find the issue.

But firstly, you need to accept, knock sensors won't affect your tune AT ALL because you run a PFC. And this, is why people are saying your tuner may not be the best to listen to at the moment, as he doesn't seem to understand this fact from the PFC.

my last comment wasn't a stab attempt, i was merely stating that it may quite possibly be a combination of other unknown factors including the change of sensors which fixed your issue. however i can only speculate at best.

this is just going back and forth and i no longer see any reason for this thread to remain active. everyone was reminded to play nicely and to keep things civil.

/locked

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...