Jump to content
SAU Community

Recommended Posts

Sorry, just guessed.

no probs dude, these are the 2nd set of eyelids ive had on the car, the first set were copies of the c-west style i think, and then i found the East Bear ones so i got them and sold the others.

is this necessary? each to their own, back on topic, the thread was going well for the first few pages with minimal chit chat and plenty of kits to choose from... shall we keep it that way?

For those interested, here are some more pics of Cara's kit, it reminds me of the C-West front bar.

post-40562-1253570847_thumb.jpg post-40562-1253570853_thumb.jpg

thanks dude, it is all about personal taste. i dont have many people tell me they think the car looks like crap or hideous, its had quite a good response thru shows and displays. my car represents me, and i dont really care what anyone thinks, i drive it, and ive built it for ME no one else :)

also with the pics of that bar, the nose isnt as long (at the top), that was one thing that caught my attention, as to me it looked a tad bit "veilside"ish. and the bar didnt have the bits on the sides either. we had to put in the side indicator mounts as the bar didnt have any :(

pics of the bar i got:

13092009542.jpg

13092009543.jpg

13092009544.jpg

IMG_4748.jpg

one of the nicest front bumpers iv seen other than the nismo z tune: http://www.importmonster.com.au/view?url=h...ype%20mv%20PIAA

This is an Abflug front bar, they have some out there kits, not really a fan personally, here are some more pics, i dont mind the side skirts

post-40562-1253761484_thumb.jpg post-40562-1253761493_thumb.jpg

post-40562-1253761499_thumb.jpg post-40562-1253761507_thumb.jpg

I don't know why people are complaining about that miss34's CM4 front bar......

it looks alot better than some of the other ones i've seen

The Uras front bar makes me wanna sing "I'm Mr Plough, that's my name, that name again is Mr Plough".

The Bomex one makes it look more like a supra with a kit.

and some of the others eg. Nismo, look like they are standard factory kits.

plus it's a bit different to the usual boxy skyline bars, without being spaz like a Veilside.

Thinking of getting one myself now =)

anywhere i can get standard r34 gtr side skirts from?

Nissan perhaps, be prepared to pay through the nose for them.

Or try calling a few of the shops mentioned in the thread, DMD, carmate, PSI parts perhaps

But if you have a Gtt as per under your username, then be aware that gtr skirts will not fit without significant customizing

carmate, DMD, psi parts will be selling fiberglass ones.. if you are after originals then nissan it is.. or find someone selling some off.. but for genuine plastic ones they won't be cheap

ps post a pic of your car with the rear qtrs as there are lots on here who want to see that conversion done.. and what the cost was?

nissan want $2,500. carmate dont have standard one's what r the links for dmd n psi parts? why wont they fit? i have gtr front guards and rear quarters im only missing the side skirts to complete the puzzle

If my memory serves me correctly, the skirts are different lengths from gtt to gtr

ps post a pic of your car with the rear qtrs as there are lots on here who want to see that conversion done.. and what the cost was?

i put a couple of pics up in my gallery i have fiber glass side skirts but the issue is it sits way to low compared to the rear bar with rear pods. the cost so far i wouldnt have a clue and dont want to know lol. when the cars complete i will post cost.

post-27832-1254371970.jpg

  • 2 weeks later...
hey guys i am new to these forums but i have a qestion about a bodykit and wheather it will be posssible to fit it to my 1998 gt four r34 skyline 4 doors i have attached the picture below in my opinion this is the best looking gtr ive seen

Fark, that's giving me a horn! Do you know what kit it is?

Fark, that's giving me a horn! Do you know what kit it is?

its a z-tune

some copies may exist but its not easy finding one for a gtt, i believe empire aero are in the process of making this kit for a gtt and gtr

*sigh* it's not a z-tune.

It's just a nismo kit. I believe everything was answered in the replies afterwards if you read the thread

ah woops, lol i should have actually opened the pic, im sure i have a pic of a silver gtr on a similar angle that happens to be a z-tune, hence my mistake, that said, it was all answered afterward

Sup there mate~ I need a bit of a help. If you really drive an r34 gtr, and have your stock front bumper just measure the height and width of the two vents below the turn lights. If you didn't get what I mean these two are beside the intercooler vents.

>[__]< |_Intercooler_|> [__] < These :(:D

Thanks dont forget

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...