Jump to content
SAU Community

Recommended Posts

Thanks guys ;)

Sure I can give you basics :P

It's an SR20VE+T now, big custom cams, sleeved / forged bottom end, modded Precision turbo on 6boost manifold, ported head, oversized valves etc, Bosch 2000cc injectors, custom plenum, Plazmaman throttle body.

sounds wicked. there is some cool stuff happening around the place with the SR VET heads going on to SR20s. but your thing is out of this world. I'd like to come check it out one day soon. :)

It's an SR20VE+T now, big custom cams, sleeved / forged bottom end, modded Precision turbo on 6boost manifold, ported head, oversized valves etc, Bosch 2000cc injectors, custom plenum, Plazmaman throttle body.

Thats awesome, its a PT6765 I'm guessing? The Precision and the FP-HTA billet turbos are wicked pieces of kit, good to see them catching on down this part of the world. I am hoping that soon I'll be able to report some results for a built RB25 running a PT6765 on E85... that should be quite interesting.

  • 2 weeks later...

cheers mate, allways keen to try new things!

Yes i used to get 380 to 450km's to a tank with BP98 depending how i drove it. I came up with a magical number in my head when making up the map in datalogit on my pc at home which was spot on, and its no way near double then what it was, but i will say it is more then 25% consumption.

My gtr uses bout 20 litres per 100 ks I did a trip from.Brisbane to.tweed on.the weekend and.went through a tank in 180 km mind u its a very very heavaly modified engine

cheers mate, allways keen to try new things!

Yes i used to get 380 to 450km's to a tank with BP98 depending how i drove it. I came up with a magical number in my head when making up the map in datalogit on my pc at home which was spot on, and its no way near double then what it was, but i will say it is more then 25% consumption.

My gtr uses bout 20 litres per 100 ks I did a trip from.Brisbane to.tweed on.the weekend and.went through a tank in 180 km mind u its a very very heavaly modified engine

  • 2 weeks later...

Finally joined the E85 club! RB25 Neo with super responsive turbo making 242rwkw on 98 and 279rwkw on E85! Very happy

Havent tried cold start yet but my idle is smoother than on 98! Thanks Trent from Status Tuning and Tao from Hypergear turbos!

post-29432-0-66365500-1313121774_thumb.jpg

post-29432-0-97175300-1313121793_thumb.jpg

Hi guys,

I just had my car run on a dyno on the weekend, it pulled 353rwkw @ 24.5psi

the AFR's were dead flat on 11:1

boost held strong to redline, only droping maybe 1.5-2psi from peak.

question is, is 11:1 AFR too rich for E85? i dont think there is much advance timing in the tune, maybe 3-5 degrees over PULP

turbo's -5's

exhaust 3in full system incl 3in decat

nismo AFM's

std airbox

K&N air filter

1000cc injectors

Nistune ECU

twin walbro in tank fuel pumps

ARC 70mm intercooler

silicone I/C piping

std cams (recond when engine rebuilt)

forged bottom end

Mines dump pipes

std manifolds

that's pretty much it

That is very low power for -5s on 98 fuel. I would fix whatever the issue is holding that back. Should be able to make around 350rwkw on 98 first. 318 is -7 or -9 power. Whatever restriction you have may be holding back your E85 results in a more significant way.

honestly in my experience it's in the ball park. having seen dozens of cars with -5s most often they make between 310 and 340kw at 20-22psi. 353kw on E85 is not bad. perhaps a little low but every car and every dyno is so different as long as it's performing it's not worth worrying about.

Hi guys,

I just had my car run on a dyno on the weekend, it pulled 353rwkw @ 24.5psi

the AFR's were dead flat on 11:1

boost held strong to redline, only droping maybe 1.5-2psi from peak.

question is, is 11:1 AFR too rich for E85? i dont think there is much advance timing in the tune, maybe 3-5 degrees over PULP

11:8 to 12 AFR is the sweet/safe spot. Leaning it out a bit will net you some gains.

Hi guys,

I just had my car run on a dyno on the weekend, it pulled 353rwkw @ 24.5psi

the AFR's were dead flat on 11:1

boost held strong to redline, only droping maybe 1.5-2psi from peak.

question is, is 11:1 AFR too rich for E85? i dont think there is much advance timing in the tune, maybe 3-5 degrees over PULP

11:8 to 12 AFR is the sweet/safe spot. Leaning it out a bit will net you some gains.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...