Jump to content
SAU Community

Recommended Posts

Hi guys

I'm new to turbo car and I just got a 33 GTS-T

Does a stock R33 GTS-T have blow off installed from factory ?

Must all turbo cars have blow off valve installed ?

cuz I've never heard the blow off sound from my GTS-T

I'm sorry if this is a stupid question. I'm really new to turbocharging. Got not much idea about it

Link to comment
https://www.sau.com.au/forums/topic/246591-blow-off-in-stock-r33-gts-t/
Share on other sites

Hi guys

I'm new to turbo car and I just got a 33 GTS-T

Does a stock R33 GTS-T have blow off installed from factory ?

Must all turbo cars have blow off valve installed ?

cuz I've never heard the blow off sound from my GTS-T

I'm sorry if this is a stupid question. I'm really new to turbocharging. Got not much idea about it

welcome to sau.

All skyline turbo's came with a factory blow off valve.

Due to the law, the air released from the bov is put back into the system and not vented out into the air.

Aftermarket blow off valves vent the pressurized air into the atmosphere making a louder noise. (These blow off valves are illegal for road use and have known to cause idle problems)

However the factory blow off valve is loud enough to hear if you have removed your standard air box and replaced with a pod filter.

Circled in red if the factory blow off valve on a r33 i think.

bov33ug7.jpg

Hey there dude dont feel stupid for asking questions thats why everyone is on this forum site. I am also new to skylines not RB motors but skylines i also have a r33 and i have placed pictures for you .

bov33ug7.jpg

^^^^^^^^^^^^^^^^^^^^STANDARD AIR BOX WITH COLD AIR INTAKE (CAI) INCLUDES FILTER INSIDE MODIFY THIS WITH A K&N HIGH FLOW FILTER

RAMPOD.jpg

OR PUT A RAM POD FILTER ON IT ^^^^^^^^^^^^^^

cheers rob

Welcome......and it sounds like you've got some reading to do :P

http://www.skylinesaustralia.com/forums/Sk...ne-t113261.html

http://www.skylinesaustralia.com/forums/Fo...ick-t66556.html

http://www.skylinesaustralia.com/forums/Fa...nce-t35442.html

http://www.skylinesaustralia.com/forums/Li...als-t35048.html

These links hold valuable information. Browse through them and take some time to read them. You'll find many interesting topics and they will help broaden your knowledge about your car.

Super happy fun times :)

  • Like 1

Thanks for accepting me hehe

I will do the reading yea =)

so basically just replace the stock air intake with aftermarket filer (any?) and I will be able to hear the stock BoV sound right ?

oh and can someone confirm me that the aftermarket BoV is illegal ? what could be a problem from it ?

Thanks again guys

I'm sure you will see my stupid questions again in the very near future cuz it could be really stupid that the links posted above don't have the answers

- -"

probably best to stick with stock for now.

but a small breakdown of bovs are:

atmospheric- completly illegal, emit the air that is meant to be recercuilated back into the system straight out to the world.... the are the loudest and if your car isnt tuned, can cause issues

plumb back - ones like in the pictures above. these are bovs that do send the air back into the system, it is what a stock bov is but you can also get aftermarket plumb back models.

you can also get bovs that emit half atmospheric/ half plumb back

Honestly, its hard to say what is legal/illegal apart from standard parts, because it depends entirely on the cop who pulls you up if he doesnt like your aftermarket bov, even if it is plumb back...epecially considering they are cracking down on "hoons" these days...

so the only thing you can be sure of is that your standard bov will be fine.

Hope this helps,

Adam

If you get a pod filter just don't get an oil one. if you put too much oil on it, it can dirty your AFM. just get a dry pod. Apexi, K&N take your pic...

Pretty sure all K&N filters are oiled, mine sure is.

Cars that are untuned have issues with atmo bov's not aftermarket plumb backs, they are fine.

Keep the stock bov mate, or buy a new one and leave the stock one in the garage for later just in case.

And if your going to get a pod filter then i also recommend keeping your stock air box in case you want to go back to being silent, trust me, i did.

Thanks for the comment

I still wanna know why untuned cars have prob with atmospheric bovs ?

Aftermarket plumb back bovs also give no sound right ?

If just changning the air filter make the stock bov sounds, I might consider doing that

cuz I just wanna have a bov sound :D

Untuned cars have problems with atmospheric blow offs because the amount air which is sucked into the engine through the filter and passed the air flow meter (measures quantity of air being drawn into the engine) is used in the calculations the computer makes to ensure the correct mix of fuel and air is sent into the combustion chambers. When the blow off valve releases some of that measured air into the atmosphere the engine thinks it has more air than it acutally does and ends up running rich and basically like a dog becuase it has put the correct amount of fuel in for the measured air quantity. Basically your engine will not like you if you install an atmosperic blow off on a standard untuned car.

Greetings and welcome to SAU!

buy a boost controller and ramp it up to 13 psi, then it will be louder :unsure:

Dont bother replacing your blow off valve, its just a total waste of money. The stock one performs great. Save the cash for go-fast mods :(

If your going to buy a pod filter, dont bother spending big bucks on one, any cheap one will do, as a lot of the brands use the same filter element. So your basically just paying for the brand name. Just make sure its a dry filter not an oiled filter. Mine cost 30 bucks and works like a dream. Like has been said, oil from the oiled filter variety can enter the air flow meter and cause all kinds of extremely annoying problems.

if you install a pod filter, you will also need to enclose it fully as its illegal to have one un enclosed. You can either bend one up yourself out of some galvanised or aluminium sheet, or buy a plastic ready made one off ebay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...