Jump to content
SAU Community

Recommended Posts

Hey guys,

I contacted 6BOOST today and they are kind enough to offer a huge saving off there top quality Manifolds.

All Turbo Manifolds are designed around a unique "Merge collector". This type of collector technology has been used in the highest forms of motor sport for years, but never applied commercially to turbo manifolds anywhere in the world. The design of the merge collector is such that all gases are directed at the turbine entry; no pipes enter across each other, disrupting gas flow. The distinct look and design of the collector is easily recognisable, with the pipes entering in a circle and forming a "point" or "spire".

With this collector technology we have seen anywhere from 200-400RPM faster spool and gains in the region of 6-15% in power in back to back dyno testing, even on highly tuned race engines. Every single engine that has been back to back tested to date has made more power and spooled faster. All manifolds are constructed from thick wall mandrel bent steam pipe and are designed and built in Australia to be of the highest quality available. All manifolds are heavily sandblasted inside and out and coated in high temp exhaust enamel that has proven to stand the excessive heat of a turbocharged environment. They also come with studs and nuts for your cylinder head and turbo flanges are faced and hand ported ready to be used.

All 6boost manifolds come with a lifetime warranty against cracking and defects, an Australian first in turbo manifold manufacture.

Manifolds pricing is:

RB20/RB25 - $950

RB20/RB25 Split Pulse (faster spool up) - $1000

SR20 - Prices up soon

If you are interested in rb26, 1jz, xr6 turbo, etc... contact me via PM and i will double check pricing, but im pretty sure its the same.

Remember you can get High/Low Mount, Internal/External Gated manifolds, all the same price. We need 6 people, a $100 deposit will be taken befor the manifolds are made. If you require a different flange please specify so and it can be made to your choice. If we do not get 6 manifolds the price will be about $50 more. RRP is $1200. Manifolds will be purchased late December.

List:


  1. 1.Choku_dori - RB20/25 high external, sr20 high external - deposit taken
    2.Shilohr32gtr - rb26 single high mount - deposit taken
    3. wisey18 - R34 RB25DET Stock location, low mount, internal gate - waiting deposit
    4. Tamimego - (ns.com) low mount sr20det t28 internal gate - waiting deposit
    5. blockasR32 - RB26 Single High mount External gate - deposit taken
    6. bigadz - lowmount sr20det manifold standard flange for GT2871R internaly gated - deposit taken

post-39806-1227771481_thumb.jpg

Edited by 2rismo
Link to comment
https://www.sau.com.au/forums/topic/246661-6boost-steampipe-manifolds/
Share on other sites

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Yes sorry, i havent got a price for RB26 yet. If you are interested i will call them and organise something.

Okay, ill ring tomorow and get more specifics like, twin single high or low for the RB26's. Ill update it tomorow.

Anyone know how i can edit my first post... it wont let me :(

PM replied

1. Choku_dori (2 manifolds)

2. Shilohr32gtr

3. wisey18 - R34 RB25DET Stock location, low mount, internal gate

Deposits are made to...

National Australia Bank

Acc Name: Leon Minic

BSB: 084-792

Acc Number 79-164-3300

Edited by choku_dori

I may be interested in a High mount for sr20det with external gate, standard flange for gt2871r, what type of prices?

Whats delivery like? ie im in Perth

PS: update your first post with all the relevant details it saves reading all your posts

Edited by volt_bite

Not quite sure what you mean by a balancer pipe. But Twin low mounts are $1100. If you want twin high mounts let me know and i can have that arranged, but must be BEFOR monday.

If anyone can help me out in editing my first post would be very appreciated :unsure:

SR20DET High or low internal or external all $800!!!!!!!!!!!!!

List...

1.Choku_dori (2 manifolds) - deposit taken

2.Shilohr32gtr - rb26 single high mount - deposit taken

3. wisey18 - R34 RB25DET Stock location, low mount, internal gate - waiting deposit

4. Tamimego (ns.com) low mount sr20det t28 internal gate - waiting deposit

5. blockasR32 RB26 Single High mount External gate - deposit taken

Edited by choku_dori
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...