Jump to content
SAU Community

Recommended Posts

As the title suggests, I'm after some suggestions on buying a new car meeting the following criteria

Must be from a dealership, no older than 5 years, anything up to $40k and the preferences are:

1.Audi

2.Saab

3.Merc

4.BMW

5.Other suggestions

Pretty much in that order. So throw up suggestions/photos of some of the nicer looking models in that price range :O

Cheers

Dez

Link to comment
https://www.sau.com.au/forums/topic/246889-choosing-a-car/
Share on other sites

new or secound hand? 40 grand wont get a new coupe but will get something like a e46 328 coupe or even a e36 m3

new or second hand doesn't matter, as long as its not over $40k, and is from a dealership...obviously the newer the better, but obviously with a limit of $40k the newer you go the further down the ladder you get as far as models go

Link to comment
https://www.sau.com.au/forums/topic/246889-choosing-a-car/#findComment-4291053
Share on other sites

Hey Mate,

I know these differ from your list, but id look at these personally. Just to be different

Lexus

http://www.carsales.com.au/used-cars/deale...&__Qpb=true

300C (pimp style lol)

http://www.carsales.com.au/used-cars/deale...&__Qpb=true

Link to comment
https://www.sau.com.au/forums/topic/246889-choosing-a-car/#findComment-4291304
Share on other sites

Honda Accord Euro.

Go drive one - you'll be impressed at how nice they are.

Otherwsie a Golf GTi

Saw a Golf GTi tonight and thought it might fit into the crieteria actually...what are they going for new/2nd hand ?

This isn't for me by the way, it's for my brother with this job he's just landed...

I'm also suggesting an F6 Typhoon....Not sure what they're going for 2nd hand (BA/BF) but if they can be had for under $40k in good condition, one of those in black, with the black wheels, they do it for me nicely...

I just don't think $40k is enough to get one of the nice (what I deem nice anyway) Euros like the Mercs/Beamers etc...and Saabs dont really do anything for me..

Link to comment
https://www.sau.com.au/forums/topic/246889-choosing-a-car/#findComment-4291445
Share on other sites

yep F6 typhoon - def vouch for that! one of the sales rep at our work has one - minor mods and tune, its making 350+rwkw - such an awesome car!!!! and good if your bro has a family or has a lot of drunken friends - lots of space.

Saw a Golf GTi tonight and thought it might fit into the crieteria actually...what are they going for new/2nd hand ?

This isn't for me by the way, it's for my brother with this job he's just landed...

I'm also suggesting an F6 Typhoon....Not sure what they're going for 2nd hand (BA/BF) but if they can be had for under $40k in good condition, one of those in black, with the black wheels, they do it for me nicely...

I just don't think $40k is enough to get one of the nice (what I deem nice anyway) Euros like the Mercs/Beamers etc...and Saabs dont really do anything for me..

Link to comment
https://www.sau.com.au/forums/topic/246889-choosing-a-car/#findComment-4291496
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...