Jump to content
SAU Community

Recommended Posts

The guy that signed me off didnt really care didnt check anything and was a bit odd... convo went something like this:

Me: Hello, here to get this signed off.

Cop: So you have made the repairs?

Me: Yeah.

Cop: ARE YOU SURE?

Me: Uhh... Yeah. Cars outside if you want to check.

Cop: Uh huhhh...

Cop: *begins to fill in form*

Cop: Whens your Regency appointment?

Me: 21st of this month

Cop: ARE YOU SURE?

Me: Yeah...

Cop: Uh huhhh...

Cop: *finishes filling out the form*

Me: Thanks.

The guy that signed me off didnt really care didnt check anything and was a bit odd... convo went something like this:

Me: Hello, here to get this signed off.

Cop: So you have made the repairs?

Me: Yeah.

Cop: ARE YOU SURE?

Me: Uhh... Yeah. Cars outside if you want to check.

Cop: Uh huhhh...

Cop: *begins to fill in form*

Cop: Whens your Regency appointment?

Me: 21st of this month

Cop: ARE YOU SURE?

Me: Yeah...

Cop: Uh huhhh...

Cop: *finishes filling out the form*

Me: Thanks.

ARE YOU SURE thats how it went? ;)

Okay guys. I just read through 18 pages of this.

Is it really as bad as it seems? I'm a P plater currently and will be driving a 33 soon...

Engine Mods

*TO3-4 turbo

*G-ready plenum

*Injectors

*Headers

*GTR intercooler

*GTR fuel pump

*Oil cooler

*Double plated clutch

*Up graded brakes

*3 1/2 inch exhaust system

Interior

*Recaro bucket seat

*Grey dash

*Turbo timer

*Boost gauge

*Pioneer sound system

Exterior

*400R full body kit

*17 inch white rims

*Tinted windows

*No dents and good paint

That's the specs there for the car.

I have to drive down Grand junction road to Old port road 5 days a week.

Am I gonna get defected on my first day?

Also. Exactly how much does an engineers certificate cost? Would it be expensive for the list of modifications there?

Currently drive an MZ20 but it's a dead sleeper, cops pull me over and don't even know it's a turbo.

To get the said car up there through regency, exactly what would I have to take off it?

Awaiting your opinions...

Cheers,

Aleks

Okay guys. I just read through 18 pages of this.

Is it really as bad as it seems? I'm a P plater currently and will be driving a 33 soon...

Engine Mods

*TO3-4 turbo

*G-ready plenum

*Injectors

*Headers

*GTR intercooler

*GTR fuel pump

*Oil cooler

*Double plated clutch

*Up graded brakes

*3 1/2 inch exhaust system

Interior

*Recaro bucket seat

*Grey dash

*Turbo timer

*Boost gauge

*Pioneer sound system

Exterior

*400R full body kit

*17 inch white rims

*Tinted windows

*No dents and good paint

That's the specs there for the car.

I have to drive down Grand junction road to Old port road 5 days a week.

Am I gonna get defected on my first day?

Also. Exactly how much does an engineers certificate cost? Would it be expensive for the list of modifications there?

Currently drive an MZ20 but it's a dead sleeper, cops pull me over and don't even know it's a turbo.

To get the said car up there through regency, exactly what would I have to take off it?

Awaiting your opinions...

Cheers,

Aleks

urrrhhhhhhhh everything?

Okay guys. I just read through 18 pages of this.

Is it really as bad as it seems? I'm a P plater currently and will be driving a 33 soon...

Engine Mods

*TO3-4 turbo > stock

*G-ready plenum > stock

*Injectors

*Headers > stock

*GTR intercooler piping must be neat and hole cut must be neat and sealed off with primer/paint/sealer to prevent rust etc..

*GTR fuel pump

*Oil cooler depending on how it was done and if it has braided lines they must be ADR approved

*Double plated clutch

*Up graded brakes all rotors/pads are fine, depending if the calipers have been upgraded?

*3 1/2 inch exhaust system Must be under 90db last time i checked so could be wrong (replace muffler)

Interior

*Recaro bucket seat must recline and be ADR approved

*Grey dash

*Turbo timer > stock

*Boost gauge depending where it is

*Pioneer sound system

Exterior

*400R full body kit

*17 inch white rims depends on width, tyres must be on or over legal parameters (yes they sometimes check load ratings on tyres)

*Tinted windows fronts max 75%, rear 30%, most likely gonna have to remove

*No dents and good paint

That's the specs there for the car.

I have to drive down Grand junction road to Old port road 5 days a week.

Am I gonna get defected on my first day? YES, haha jk depends if you're in the wrong place at the right time

Also. Exactly how much does an engineers certificate cost? Would it be expensive for the list of modifications there? to engineer oversized rims (more than 2" up, 1" wider than stock) is around 3.5k so im told.. good luck with the rest unless you are sleeping with an engineer

Currently drive an MZ20 but it's a dead sleeper, cops pull me over and don't even know it's a turbo. nice cars

To get the said car up there through regency, exactly what would I have to take off it?

Awaiting your opinions...

Cheers,

Aleks

basically, clean the car up, don't drive like a wanker, have a good attitude and you might just make it through but if you do get defected be prepared to return lots of things to stock, fix leaks if any, fix bushes if any are worn etc etc...

things like injectors, fuel pump, clutch etc.. they usually overlook if the engine appears overly stock so shouldn't have too much trouble there

i may not be 100% correct about all the above but it gives you a pretty good idea

good luck with it!

Edited by tx3_90
basically, clean the car up, don't drive like a wanker, have a good attitude and you might just make it through but if you do get defected be prepared to return lots of things to stock, fix leaks if any, fix bushes if any are worn etc etc...

things like injectors, fuel pump, clutch etc.. they usually overlook if the engine appears overly stock so shouldn't have too much trouble there

i may not be 100% correct about all the above but it gives you a pretty good idea

good luck with it!

I was hoping some would be over lookable. Rims don't look overly huge, they're kinda small. The car's neat, spoiler's been taken off, no bling no nothin.

Aleks

Okay guys. I just read through 18 pages of this.

Is it really as bad as it seems? I'm a P plater currently and will be driving a 33 soon...

I have to drive down Grand junction road to Old port road 5 days a week.

Am I gonna get defected

Aleks

lol, Aleks.......is the Pope Catholic?

I hate to say this bud but after this post, the officer in question may keep an eye out for you.

Welcome aboard anyway champ :P

lol, Aleks.......is the Pope Catholic?

I hate to say this bud but after this post, the officer in question may keep an eye out for you.

Welcome aboard anyway champ :P

Thanks ;)

I hope not though, car's a sleeper ;)

Aleks

you'll be ok mate. my car's a sleeper too.

no issues in the ownership of it, and none with the v8 sedan before that....would be right on 9yrs now without any issues, personally

drive sensibly and never get a speeding fine. drive 100% concentrating on whats around you, good posture, good steady clean control - no fkn about, and you'll be fine

enjoy your experiences!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...