Jump to content
SAU Community

The Defected Thread...


Cubes

Recommended Posts

Demisters should be fine. I only needed to pick at the corner to get the tint up enough for me to pick at with my finger and peel off the rest of the way so didnt need the blade to go anywhere near the lines. But yea, I cant believe it was so easy and I was going to pay $110 to have it removed!

so are u keeping it or selling it after getting it off defect???

so if a COP PULLS UP BEHIND U AND RUNS YOUR PLATES THROUGH HIS COMPUTER WILL IT SAY THAT YOUR CAR HAS BEEN "DEFECTED" IN THE PAST???

Link to comment
Share on other sites

so are u keeping it or selling it after getting it off defect???

Decided I'd keep it... wanted to sell it because I was annoyed at it and couldnt be stuffed anymore but after calming down I cant let go of it just yet just because some cop doesnt like Skylines. :P

Link to comment
Share on other sites

Was given a written warning the other day for my factory MOMO wheel in the MX5 because "apparently i didnt have the ADR certificate with me. next time he said "it will be off to regency with you young man"

Its a factory wheel FFS. on a side not he didn't look twice at the fixed back so i cant really complain

Link to comment
Share on other sites

has everyone who has been defected by this twat gone and made a complaint? its benneficial that you do

are you for real

what are you going to say in the complaint um "to the body that be please reprimand Niel for defecting my car because it didn't adhere to ADR's just because i think he doesn't like skylines"

GROW UP people

im sick of hearing about Neil this and Neil that, he is only doing his job and the more you guys bag him the more fuel you add to the already ablaze fire, act like men and cop it on the chin fix whats defectable and MOVE on

Link to comment
Share on other sites

i was referring to mechanical mods in the above post ;)

seen plenty of engine bay pics from members in various threads... always chrome bits n pieces with colour coded silicone joiners and painted stuff... what do you expect when a cop lifts the bonnet :P

only seen a couple stealth bays... that is not to say a lot more people aren't doing it tho.

Edited by tx3_90
Link to comment
Share on other sites

are you for real

what are you going to say in the complaint um "to the body that be please reprimand Niel for defecting my car because it didn't adhere to ADR's just because i think he doesn't like skylines"

GROW UP people

im sick of hearing about Neil this and Neil that, he is only doing his job and the more you guys bag him the more fuel you add to the already ablaze fire, act like men and cop it on the chin fix whats defectable and MOVE on

are you that dumb? or just arrogant?

he is not following the correct methods of defecting, whatever happened to police actualy measuring things and testing sound level??? you are more than within your rights to make a complaint if the officer in question isnt following guidelines and you felt you have been unfairly dealt with..... for example "illegal air filter" that is BS, so make a complaint about it, its police harrasment.

so if your done carrying on like a 12 yr old can we get back to the topic?

Link to comment
Share on other sites

he is not following the correct methods of defecting, whatever happened to police actualy measuring things and testing sound level??? you are more than within your rights to make a complaint if the officer in question isnt following guidelines and you felt you have been unfairly dealt with..... for example "illegal air filter" that is BS, so make a complaint about it, its police harrasment.

agree 100%.

complain enough and his chances of promotion / advancement within the force is NIL

Rocky & Vu should be making a formal complaint IMHO

Link to comment
Share on other sites

are you for real

what are you going to say in the complaint um "to the body that be please reprimand Niel for defecting my car because it didn't adhere to ADR's just because i think he doesn't like skylines"

GROW UP people

im sick of hearing about Neil this and Neil that, he is only doing his job and the more you guys bag him the more fuel you add to the already ablaze fire, act like men and cop it on the chin fix whats defectable and MOVE on

Unfortunately, he is for real Steve.

I've reversed a few mods myself, as I'm not a fan of not having my Stagea. I've been pulled over a few times now in it and I've been lucky. Whilst the mods are only minimal (pod filter, boost gauge), it did come to the attention of Neil. He let me off and gave me a chance to reverse some of those mods, which I have done. Take the hint guys.

The cops are all over Hanson Road, pulling over any car ... not singling out imports. Any car. Drive a blatantly defectable/unsafe car, or hoon around, expect to be noticed.

Old japanese saying: "Nail that stands out in floor, is first to be hit with hammer."

Link to comment
Share on other sites

beleive it or not but complaints do actually get dealt with, within the police, so it is worth the 20 minutes of your time to make the formal complaint. its a little bit of paper, no lawyers, no court fee's just a simple a4 bit of paper that carry's alot of weight within the force

Link to comment
Share on other sites

The nail that sticks out gets hammered - Tokyo Drift.

It is an actual saying, not a movie quote. Heard it when I lived in japan ... so it must be authentic! :D

Link to comment
Share on other sites

I won't take anyone's side here but reading through some of the posts about this Neil fella, I don't recall reading anything that he has done that wouldn't be within the parameters of the law.

At the end of the day, he only needs to suspect that you have a vehicle that doesn't comply with ADR's or emissions and within his power can pull you over. He doesn't have to measure anything either, to send you to Regency.

Based on the little that I've read in regards to his methods (and I know he's become a nemesis to many of you), one complaint alone to his sarg (cause he's only a conny) without any substantiated evidence of ill treatment towards any of you, will end up either in their shredder or bathroom for when they run out of toilet rolls.

A few harsh words from a copper may hurt your feelings but will hardly get him a reprimand, let alone off the force!

30 years ago you would've copped a boot up the ass from him as part of the deal, lol.

If you drive a non compliant vehicle and they eventually catch up with you, smile and cop it on the chin cause it was good while it lasted.

Link to comment
Share on other sites

no doubt Rhys, but it may fall on deaf ears unfortunately.

If all of you that have had experiences with him had a similar outcome and feel justified in pursuing it, get together and go and see your local MP first.

By following proper channels you'll have a bigger voice.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 4WD version is harder to find so I compared the parts diagrams of the two https://nissan.epc-data.com/stagea/whc34/5414-rb20de/engine/172/17453/ and https://nissan.epc-data.com/stagea/wgnc34/287-rb26dett/engine/172/17201/ seems like the same part is called out: 17201...what with WHC34 tank work?
    • Thanks man, car is registered! Time to enjoy it. But if anyone has questions let me know happy to help others avoid my pitfalls.  
    • 2.8L Stroked S1 RB25 Fully built block (Spool&CP) and head (Ferrea & Kelford 272's). Hydro lifters.  Precision 6466 Gen2 1.00 T4 Divided. 2x 40mm Turbosmart open dump gates.  DW 1200cc injectors 2x AEM 320LPH Pumps Haltech Elite 2500, IC7, WB1, TC8, Etc.  4" Downpipe, 3.5" Catback.  94AKI (101.5ron) Pump gas + WMI (2x 1000cc nozzles) 463rwkws @ 27psi on a mustang roller dyno. 
    • I finally got it on the dyno today and luckily it stayed in one piece! It wasn't without its dramas though. First off, sent my power steering belt to the moon around the third pull. Scared me half to death. Tuner laughed and mentioned that often happens with RB's... I may need to look into adding the Ross power steering idler, or something a long those lines.  Second issue that came up was about 2 hours in, we realized the VCT wasn't working and had to go back through the timing and knock threshold once it was fixed (I had botched setting up VCT). That waisted a good hour or so. I was surprised to see that with VCT working, we saw a ~38rwkw difference across the powerband. More then I would of expected.  Without further ado, made 463rwkw@27psi. Not the numbers I originally set out after, but still more then enough to kill myself and I'm very happy. Mustang roller dyno's are known to be heart breakers compared to other dyno's. Two things that limited me, first was the hydraulic lifters/7600rpm cut. Tuner was adamant that I was losing out on a lot of power up top because of it. Second was the pump gas & WMI. He wasn't 100% comfortable tuning with WMI, and was honest about it. He stated he's more confident on E85/Race gas. I look at this as a positive as it leaves me a lot of room for improvement. All in all, very happy! I need to see what I can do about that rev limiter... I use to rev my stock RB20 to 8000rpm and now I have a fully built head that I only rev to 7600... It's bugging me.  Don't mind my fantastic picture/filming skills.  RB28 - Dyno (1).mp4      
    • The Daily - 2011 Audi A5 And the camper VW transporter T5          
×
×
  • Create New...