Jump to content
SAU Community

Recommended Posts

IF you own a skyline you soon will! haha have fun fixing stuff ; )

Hahaha yerp i own a skyline as well, done a whole heap on that i can tell you, but yer haven't really been involved in the heavy industry for a whole lot of time so still learning things...

  • 3 weeks later...

Do it yourself. Half the fun.

And don't say "I don't know how", the internet (and this forum) can be incredibly helpful. We all start somewhere.

Yeah it is a piece of piss once you have done it once, only way to learn is to do shit yourself. If you said 'I dont know how' with every problem in life you'd still be sitting in your cot sucking a dummy.

Honestly though it is not a hard job, nothing like changing a turbo or an engine, lots of easy to get to bolts and they pop out. Always good to keep a set of stock springs/shocks for occasions like this.

Ok - help me out here, going for an identity check - what's defectable?

- APP 2 piece front rotors

- Varis CF Rear diffuser

- Tomei Ti catback

- HKS dump+front pipe

- Password JDM CF engine bay + intake kit (just carbon fiber dressup for the engine bay)

- Carbing front strut brace

- Carbing rear strut brace

- Carbing lower arm bar 2 point

- Carbing center frame brace

- APP Brake lines

- ARC Oil cooler

- Whiteline front+rear sways

Currently has a tomei ti test pipe, obviously putting back the stock cat, and has coilovers, again putting back the stock suspension.

Everything else should be good i reckon? Only thing might be exhaust noise?

  • 1 month later...

would appreciate a bit of help here guys, ive never been defected before, but we all know its only a matter of time before i do get defected. just want to know if a few things i have are defectable.

i have an r33 series 1 gts-t. i have put a series 2 steering wheel on it, have done a homemade job of re wiring up the horn so as to save myself buying a series 2 clock spring. that is ok i believe, what im not sure about is whether the series 2 airbag steering wheel on a series 1 non airbag skyline is defectable if i have the airbag removed. to be honest there is nothing wrong with it in my opinion, but it depends how picky they really are.

also i have the tweeters of my stereo just doubled side taped to the side of my car up above my head. is it illegal to have them up there? as i know boost gauges up there are defectable etc etc

also ive got a boost gauge flush mounted to my dash, next to my cigarette lighter.

i have a trust front mount intercooler, splitfire coil packs, and i have a series 2 front bar with the fog lights obviously not wired up as there is no use/need for them.

also , how do i know if my car is too low or loud??

i have a 3 inch exhaust technology dump pipe, high flow cat, and 3.5 inch cat back exhaust running no muffler or resinator. its insanely loud. i want to get a new cat back exhaust, but dont want to spend the money on something that is still defectable.

it also has a complete engine replacement, with a series 2 engine being put in. i take it there is nothing wrong with that?

anyones help is greatly appreciated.

  • 4 weeks later...
- Password JDM CF engine bay + intake kit (just carbon fiber dressup for the engine bay)

Unless ADR approved defectable, you'll need a stock bonnet 99% sure.

- APP Brake lines

Unless they are ADR approved defectable.

Everything else should be good i reckon? Only thing might be exhaust noise?

Make sure you have a CAT and exhaust is legal DB and you will be ok.

would appreciate a bit of help here guys, ive never been defected before, but we all know its only a matter of time before i do get defected. just want to know if a few things i have are defectable.

i have an r33 series 1 gts-t. i have put a series 2 steering wheel on it, have done a homemade job of re wiring up the horn so as to save myself buying a series 2 clock spring. that is ok i believe, what im not sure about is whether the series 2 airbag steering wheel on a series 1 non airbag skyline is defectable if i have the airbag removed. to be honest there is nothing wrong with it in my opinion, but it depends how picky they really are.

Sounds like they wont even notice anyway providing the horn is working, as long as the airbag as been removed I really see no issue here.

also i have the tweeters of my stereo just doubled side taped to the side of my car up above my head. is it illegal to have them up there? as i know boost gauges up there are defectable etc etc

It isn't so much that boost guages are illegal, it is where they are mounted, if you mount anything at all on the A-Pillar, somewhere it obstructs view or where you could hit your head on it in an accident it needs to be removed. The fact it is a boost gauge has nothing to do with it.

also ive got a boost gauge flush mounted to my dash, next to my cigarette lighter.

i have a trust front mount intercooler, splitfire coil packs, and i have a series 2 front bar with the fog lights obviously not wired up as there is no use/need for them.

also , how do i know if my car is too low or loud??

Intercooler is fine as long as no structural parts have been cut. You measure the exhaust volume with a dB meter, if it is above the legal limit then it is illegal. If the car is below the legal eyebrow height (you'll need to call regency park hotline to find this out) or it is below 100mm at the lowest point then it is too low.

i have a 3 inch exhaust technology dump pipe, high flow cat, and 3.5 inch cat back exhaust running no muffler or resinator. its insanely loud. i want to get a new cat back exhaust, but dont want to spend the money on something that is still defectable.

it also has a complete engine replacement, with a series 2 engine being put in. i take it there is nothing wrong with that?

anyones help is greatly appreciated.

If your engine numbers dont match you need to fill out a form saying change of engine, no issue with this though. I'd recommend getting a stock exhaust for the regency visit then putting your old one back on afterwards. If you aren't happy with the volume keep adding inline straight through large bodied oval mufflers until it is the volume you like, shouldn't be more than $200 per muffler fitted.

Edited by Rolls
  • 3 weeks later...

How many of you guys have got through regency with aftermarket fuel rail + injectors etc? I have an alloy fuel rail with an aftermarket fuel reg and GTR injectors, I'm going to take it through with them still in there as Im quite sure they will fail me on a few things so I'd like to get a nice list. So yeah anyone got through with aftermarket injection? I've painted everything matte black so it doesn't stand out like dogs balls, but I get the feeling they are pretty switched on.

Defected down the bay for going around a round about and they saw my lights, defected by SA polices top import car specialist Neil the bald pom, who didn't know anything about what he was looking at, just knew where to look.

Just a warning to all you guys out there for the apparent $410 per item defect!!

none because he said i wasnt a wanker about it and i played his game - truth or dare - fair wierdo if you ask me, didnt even know what he was looking at half the time, straight past all the ebc shit under the bonnet...

none because he said i wasnt a wanker about it and i played his game - truth or dare - fair wierdo if you ask me, didnt even know what he was looking at half the time, straight past all the ebc shit under the bonnet...

Sounds like he might have been the one who did me last Friday, bald, slightly overweight guy?

edit: N Hastie was the name on the fine, same guy? said identical stuff to me if it wasn't him, also a weirdo who found my boost controller in my ash tray in 10 seconds flat, first thing he did was pull the ash tray out without checking anything else. Wrote it down as 'turbo timer' though.

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...