Jump to content
SAU Community

Recommended Posts

fullee sick 20s bro

unless your planning on entering your car into a show (which you very well might be) don't even consider driving around with them on the street.

i'v never understood why you would compromise handling and grip in a sports car for cheap lebo looks.

my mate had 20" vault cyrstals on his R33 gts-t

not only did it look shiit the ride quality was completely fkd.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

yes the new GTR comes with 20s. but the gts-t originally came with 16s

i wonder how 24's would go on the new GTR. my guess is not so good.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

Those wheels are not chrome bling though.

If anyone noticed alot of cars including the GTR now comes with 20" rims

For looks. The car is so huge that small rims look disproportional.

Several race cars run big 20" on the front to increase handling.

I'm curious to see which race cars do. And I'm not sure how increasing unsprung weight and rotational inertia provides an increase in handling.

Going to big rims has little to do with improving handling, especially not a 4" increase over stock. On a race car you go for the smallest wheels you can fit around your brakes. Sometimes that necessitates putting on bigger rims than stock.

At any rate, the suspension is engineered around the wheel/tyre combo. What's the likelihood that this guy's R32 has its geometry and components engineered around 20's? Or that it will only get driven on smooth surfaces where the loss of sidewall compliance and increase in unsprung weight is not going to more than offset the supposed benefits of reduced sidewall flex?

hey guys i am just wondering if any1 knows whether or not 20" rims will fit a stock r32 gtst (the offsets and width and bolt patten are all proper) or if i will have to raise the car to fit these.

Thanks

as mentioned in the original post the car is stock.

the cars "geometry" has been set up to handle the stock 16" wheels that were issued from the Nissan factory floor.

so 20s will not do at all for this setup.

If anyone noticed alot of cars including the GTR now comes with 20" rims, Several race cars run big 20" on the front to increase handling.

20's will fit get the offset right n work from there.

Ahahahahahahahaha

hahahah

hahahahahaha

hahahahahahaha

haha

hah

ha

Buses come with huge tyres and rims - so by that principle bus wheels should work out OK on the 32 as well.

GOLD.

:)

can you see the rims when your driving?? i cant on my r32 so my guess is no... therefore looks mean nothing, purpose means everything. buy your 20" rims and stick em on your wall, use them for a glass coffee table or tv stand where you can see em.

for the record buses are not 5 stud lol best come back i got.

TO ANSWER THE QUESTION:

Yes they will fit .. you would need a cheese cutter wheel something like 20x8 with an offset to fit .. coilovers would do wonders too ..

Edited by DECIM8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...