Jump to content
SAU Community

Recommended Posts

  • Replies 719
  • Created
  • Last Reply

Top Posters In This Topic

that's the spirit dirtshed...

i've seen your arse and i reckon i know a few fat blokes that would be interested in detailing your undercarriage (beer baron would definiotely be interested in sucking your bent noodle)

i don't trust people under 100 kilos

you'te all kunts

that's the spirit dirtshed...

i've seen your arse and i reckon i know a few fat blokes that would be interested in detailing your undercarriage (beer baron would definiotely be interested in sucking your bent noodle)

i don't trust people under 100 kilos

you'te all kunts

i haven't been under 100kg since i stopped busting fat pie eaters like yourself on the footy field.

but your right still shouldn't trust me. :)

Karnt

you must trust me then Pete

You are right Paul I don't like competing in the little league but my car is way too standard to bother with open class. We will give that or invitational a proper go when the new car comes along which is a much more serious effort

In any case I think the production car will stuggle to catch that little honda even in clubman. Its a heavy bastard with very little power (only so much you can do with std injectors and afms). But I would be willing to support the event and give it a go if they are ok with a car with partially stripped interior.

Says the guy with a 200k GTR that is only good for 9 seconds of noise :D Throw some suspension in it and swap over the brakes and enter it

its not even worth 50K...just ask the buyers. We have a car to enter....mines all top end now :) ...we have built both cars to serve a purpose...we will bring the circuit one.

you play squash with squash racquets and tennis with tennis racquets....the right tool for the job Roy.

Dont knock my drag suspension...it was good for 1.17 last year and was only getting warmed up.

Edited by DiRTgarage
Ah Dirt you are a funny bugger :D

So now you are telling us you are like a NASCAR team. A different car for a different purpose LOL

cheers Bozzo.

Bit like you have a road car to drive on the road...and everyone elses track cars that you drive on the track :)

its nice to be nice

Edited by DiRTgarage

Who the fark plays squash or tennis? All these cars built to serve a purpose...sheesh. Just throw whatever parts you can get cheap 2nd hand at it and drive it until it catches fire or you crash into something. The fun is in driving an ill handling POS that doesnt do what it should ... but is fun trying to get the bastard to do stuff it shouldnt. It kind of works for me :).

Fark it...i have just convinced myself to enter. Need to give Fatz someone to chuck cans at! I know it really means he respects me.

Oooh, Steve-0s in... pretty gutsy entering a car that has run once in 3 years and is still in the workshop :D I'll bring the sawdust

And Advan Performance need to enter more cars... 4 isn't enough...

You're all farked now! Make sure you fit some tappety, tap bars 'cause no way anybody is passing me without losing some body parts :D

Cool, i also see that Gary has entered. R32 showdwon, RB20 vs RB30, Tein vs Bilstein :yes: I best stay away from the dodgey curris here in India to make sure i am fighting fit for this. Or in fact maybe i shoudl hit the dodgy curries for 8 weeks or so to try and shed some unwanted kgs ? :P

I was in Roy, so it coulda been RB20/apexi V RB20/lotzanoise/Tein...... but sadly, F1 beckons....

On another note, I'm suprised at the lack of speculation re Berry's new 34..... i mean, I know it's a new car n all (assuming its finished in time), but the thing is pretty wild!!! Like, WILD!!!! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...