Jump to content
SAU Community

Recommended Posts

Correct Lith, it is a twin scroll setup. I keep looking up sleeves for hidden cards but at this stage it is showing remarkedly similar boost characteristics to the 35r single entry. Its only running gate spring pressure at this stage but until the gate starts open on spring pressure the curve is identical.

Waiting on a wide band sensor to arrive and then we'll hook the boost control up and go to town on it.

Pretty happy budgie so far.

Will it only be run using E85 Noel? Or is a petrol tune being done too?

Nice result so far! :)

Any ETA on that? Surely it cant take long

Sensor was ordered from south this morning Steve. should get here monday/tuesday.

As soon as Sean has a spare spot he will throw it back on the rollers. I think he's quite keen to see where this goes as well.

Will it only be run using E85 Noel? Or is a petrol tune being done too?

Nice result so far! :)

At this stage its e85 only Mike, However the way it drinks the stuff I may be forced to run a separate 98 unleaded tune. I renamed the car "sugar daddy"

Correct Lith, it is a twin scroll setup. I keep looking up sleeves for hidden cards but at this stage it is showing remarkedly similar boost characteristics to the 35r single entry.

Thats not too surprising then, I'd have expected the 3788R to be a few hundred RPM laggier all things being equal, and a good twin scroll manifold drags things down a few hundred rpm (also tend to help low down/ midrange torque quite a bit too - on top of boost threshold). This is one of the reasons I've considered a twin scroll GT3582R as an upgrade over my single entry GT3076R, I've said before I have a strong suspicion it'd result in a similar drive in terms of building boost but with the ability for more power pretty much everywhere.

It will be interestingt to hear the power results and more importantly, how it drives - could be brutal ;)

If you changed nothing else but went from single scroll to twin scroll (both with good aftermarket manifolds) would the twin scroll make more peak power as well? or does it primarily only assist with low down/midrange power when coming onto boost?

Maybe slight gains up high if you go to a bigger a/r housing than the single entry one, big the real tangible gains are midrange and coming up onto boost - bearing in mind thats for a given boost level, so because it spools faster as well the perceived spool and response will usually be better than what the boost curve would imply... if that makes sense?

Interesting indeed.

On dyno/loaded/4th i take it?

No, that's on the street. Sean had a 20psi boost cut and a 4200rpm cut. I was hitting boost cut at 3900 in 4th. This was pre tune though, the timing will effect how the boost comes on so we'll see if it makes any difference.

Has it got bigger cams? On E85 I'd have thought >500whp on E85 would be a piece of piss anyway... a stock RB30/RB25 head wouldn't really gain much without some head fettling. On the flipside, with some big cams and that turbo - 20psi will justify the turbo but 600+whp would probably be the order of the day haha.

Has it got bigger cams? On E85 I'd have thought >500whp on E85 would be a piece of piss anyway... a stock RB30/RB25 head wouldn't really gain much without some head fettling. On the flipside, with some big cams and that turbo - 20psi will justify the turbo but 600+whp would probably be the order of the day haha.

It does have bigger cams Lith. 10.25 270 degree tomeis. The head has had a lot of attention in a minimalist kind of way. given we made 555 with the 35 on a .82 housing I have no doubt we could dial in pretty much anything up to around 6/650 hp if thats what we were chasing.

Nice achievement so far! Going to be a weapon with mid 500hp Noel. You will be buzzing tires like crazy!

Hoping we might finally have it right Mike. Its been a long hard road achieving the numbers with the 35r but it looks like all that trial and error may have cleared the path for the current setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...