Jump to content
SAU Community

Recommended Posts

Hi there, got my car tuned today at Pits on the gold coast.

Mods as follows.

R32 GTR

RB26 bored, decked, cleaned, balanced and the crank ground.

Ross pistons, total seal rings, Spool Conrods.

Head is mildly ported, re-seated etc etc, Tomei 270 dur 10.8 lift cams, Brian Crower springs.

N1 oil pump, tomei oil restrictor.

1200cc injectors, 2 x 044 pumps, 3L surge tank.

Haltech E11v2

STD coils at this stage

115mm intercooler, chinese one i'd say, $400

70mm Billet turbo by Mark at Mr Turbo, Gold Coast

60mm wastegate, ebay cheapie.

4 inch exhaust all the way with 1 straight thru muffler.

twin plate OS clutch.

Tuned today on E85 from the pump, made 564 Hp on 26 psi, 528 hp on 23psi, and 501 on 20psi.:cheers:

Maxed out the injectors at 26 psi, looking at ID 2000's for the next tune. hopefully crack 600 which I don't think will be a problem.

post-79073-0-19452900-1305802928_thumb.jpg

Hi there, got my car tuned today at Pits on the gold coast.

Mods as follows.

R32 GTR

RB26 bored, decked, cleaned, balanced and the crank ground.

Ross pistons, total seal rings, Spool Conrods.

Head is mildly ported, re-seated etc etc, Tomei 270 dur 10.8 lift cams, Brian Crower springs.

N1 oil pump, tomei oil restrictor.

1200cc injectors, 2 x 044 pumps, 3L surge tank.

Haltech E11v2

STD coils at this stage

115mm intercooler, chinese one i'd say, $400

70mm Billet turbo by Mark at Mr Turbo, Gold Coast

60mm wastegate, ebay cheapie.

4 inch exhaust all the way with 1 straight thru muffler.

twin plate OS clutch.

Tuned today on E85 from the pump, made 564 Hp on 26 psi, 528 hp on 23psi, and 501 on 20psi.:cheers:

Maxed out the injectors at 26 psi, looking at ID 2000's for the next tune. hopefully crack 600 which I don't think will be a problem.

that thing is a light switch... must be fun though

a ute with 400rwkw... umm better buy shares in a tyre company!... might want to invest in Bonds as well... free lifetime supply of underwear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...