Jump to content
SAU Community

Recommended Posts

I had a big post of the silly adventures of its first night of use...but really. It didnt read well and didnt show me in good light ...and nobody cares....but basically. Radcam works well when sober. Makes sure you are familiar with its operation sober before piloting it drunk! ;)

But it arrived after paying the UK govt a bribe, i mean a tax and now all set for Monday! :)

Edited by Roy

Well, I will post up the Radcam footage in a few days...and will post last years POV footage in a Caterham vs Radcam in a Caterham from today. Basically..Radcam kills it! Sound is a bit funny, took a while to get decent sound, the mic needs a sock for sure to drown out background noise

Well, I will post up the Radcam footage in a few days...and will post last years POV footage in a Caterham vs Radcam in a Caterham from today. Basically..Radcam kills it! Sound is a bit funny, took a while to get decent sound, the mic needs a sock for sure to drown out background noise

We found the built in mic works a treat. It's got auto wind noise reduction. Used em in 6 cars at the Muscle Car masters for Channel 7 on the weekennd and got some awesome footage. Just waiting for permission to post some video. To whet your appetite, here's a screen grab from Glen Seton's BMW, chasing a very familiar and famous GTR.

post-47107-1283802279_thumb.jpg

Edited by martyboy26
We found the built in mic works a treat. It's got auto wind noise reduction. Used em in 6 cars at the Muscle Car masters for Channel 7 on the weekennd and got some awesome footage. Just waiting for permission to post some video. To whet your appetite, here's a screen grab from Glen Seton's BMW, chasing a very familiar and famous GTR.

The internal mic is definitely the go. I've attached a short clip (reduced and pixelated for copyright reasons) to give you an idea of the audio quality. This was in a Aussie race Car with no side windows and the recorder mounted in the front.

Radcam HDPro Audio Demo With Internal Mic

Edited by martyboy26

I tried a few different arrangments. And reviewing all the vids this morning you are right. The first run i did not use an external mic and just had the hand unit strapped to the passenger seat. It seems fine. Perhaps should ot have mounted it so close to the harnesses which just flap around at speed. Thats part of the noise i thought was wind noise.

The run with the external mic up under the dash with no sock is far the worst. The run with my ipod headphone foam thinkgies on the mic seems to be maybe just better then the internal mic. So I guess thats what you get when trying to listen to a crappy laptop speaker at a track day with cars deafening you...maybe shoudl have jsut stuck with the internal mic.

Well i just uploaded some footage to youtube. It doesnt do the quality justice.

See post #5 ... http://www.skylinesaustralia.com/forums/Si...za-t335975.html

I recorded it in 1080 60Hz...and struggling to understand what format to save it in using Windows Movie Maker? Any tips on what format when uploading to youtube , i want to avoid the back box around the footage?

Well i just uploaded some footage to youtube. It doesnt do the quality justice.

See post #5 ... http://www.skylinesaustralia.com/forums/Si...za-t335975.html

I recorded it in 1080 60Hz...and struggling to understand what format to save it in using Windows Movie Maker? Any tips on what format when uploading to youtube , i want to avoid the back box around the footage?

Nice vid. I'm glad you got your camera on time. Mount looks solid on that car. Next time try the built in mic and you'll find it works pretty much anywhere.

Movie Maker doesn't really work well with HD videos. If you just want to trim the beginning and end and save in the original untouched format, then use MPEG Streamclip free from http://www.squared5.com/ is the go. This will give you the best quality on Youtube with zero quality loss. If you want to edit and add titles etc the get hold of a copy of Pinnacle Studio HD http://pinnaclesys.com Save the finished file to MPEG-4 1080 or 720

Also, if you want to widen the view, use 720P. It widens the view to 140 degrees (from 120 for 1080P) Can be good for some shots.

Keep em coming. Cheers from Mark at RaceRecall I've attached some screen grabs from the Muscle Car Masters. Both of these were in the same car, just using the 2 different settings. Hope that helps.

post-47107-1283895401_thumb.jpg

post-47107-1283896568_thumb.jpg

post-47107-1283896635_thumb.jpg

Edited by martyboy26

LOL, that explains why one minute you could see the gear changes and my feet (720p) then the next you couldnt (1080p) :) 120deg vs 140deg :(

Thanks for the links...Not sure i will have time to play with the footage...but will for future vods and the Silverstone vids when i get back to Aus

Edited by Roy
LOL, that explains why one minute you could see the gear changes and my feet (720p) then the next you couldnt (1080p) :action-smiley-069: 120deg vs 140deg :(

Thanks for the links...Not sure i will have time to play with the footage...but will for future vods and the Silverstone vids when i get back to Aus

Why do I bother to include instruction booklets???? No-one ever reads em. LOL!

Instruction booklet? One question....does the camera had a max time record setting? I came in one session and the camera was already stopped. I thought i may have hot the remote in my pocket by accident...bit far fetches but could not explain it....maybe find the instruction booklet :action-smiley-069:

Instruction booklet? One question....does the camera had a max time record setting? I came in one session and the camera was already stopped. I thought i may have hot the remote in my pocket by accident...bit far fetches but could not explain it....maybe find the instruction booklet :action-smiley-069:

No, it'll record until the battery goes flat or the card fills up. When you start the camera up, you'll see a display at the bottom of the screen that shows how much recroding time is left on the memory card. Once it's recording, it shows how long the recording has been running.

Edited by martyboy26

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...