Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

konis/kings, seems to be all right but will see as time goes by how firm the konis stay, a mate has them on his r30 put them in about 9 months ago and hes saying there are getting soft, his is a daily driver, mines gone 60km since the ignition was wired up, i can say cornering is flat and fast!!

anyone seen the second last page of the latest HPI mag as there is the whole page to the DR30, small write up not to much info what they do say though is stay away from a dr30 for under 10,000 and be prepaired to pay up to 15,000. Also i emailed the bloke about the RS turbo booklet and he said its in japanese, but he did say that hes got a 20 foot container of dr30 parts and panels plus a couple of cars comming over in march so if there are things people are looking for then he may be to go!!

ah yes that SA GUY....sed he had a dr30 diff he would sell me for $1300....wtf.

on the dr30 front bar issue, got a qoute for one ..800$ landed from that jenesis place

1300 on a r200 diff i quess??, the front bar quote is that through rezz or jenesis itself?

I haven't actually pulled the diff apart to look yet. It open wheels and twins up then opens again so it ain't in the greatest condition. Probably just shimming or drive plates just guessing. I wanna change ratio's as well but that could be expensive.

sounds very much like my diff, under load it twins, but free spin it has one going one way and the other spins the other way?? was told the diff in a pintara has the perfect ratio for track and was a good swap?? thats what i was told!!

boof- pm'ed stu-r30 with the details and seems hes done deals with him?? may be ask stu-r30 what he thinks??

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...