Jump to content
SAU Community

Recommended Posts

Mate you should try getting a straight answer from our wankers at regency, depending on what time and who u speak to you will get a different answer both times...They have NO idea!!!   :bs!:

thats what i figured so i was checking to see if anyone has ever got a REAL answer and then passed at a later date

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

thats what i figured so i was checking to see if anyone has ever got a REAL answer and then passed at a later date

Sorry Guys, As I am in NSW I can only give their regs, but as a thought, maybe speak to the guys at Jaustech or Japanese Motorsport.

As they are into modified cars, Jaustech in particular doe a few R30's, they might be more up to speed.

Good luck,

Dennis

I bought a GT30 turbo,turbosmart wastegate,s/hand mazda injectors,hybrid intercooler and Wolf ecu.Thats it.

Standard manifolds,head,cams,throttle body...all stock.It runs 18psi boost and BP98 fuel and is a rocket!

I cant wait to fit my Tomei 272 cams and put 25psi into it!

If thats all i have to do than im off to the wreckers to look for an fj20det, should of done it earlier.

What colour is your R30 Mike???  Its not Nissankings old R30 is it??  I've sen that thing getting round heaps lately, still looking tough as :)

nah i dont think it was, mine is the blue/silver color but at the moment it has alot of base coat on it as its almost ready for the resray...

hey guys, got an update. i put r31 shocks in the rear and new r30 ones in the front, and lowerd it on corbra's springs. not superlows just low. and well the front didnt even change at all hight. 10mm max!. even knowing these springs are rated to 20-30mm :P. and do i overcome the fact i only have 7cm of travel in my shocks.?

im confused

hey guys, got an update. i put r31 shocks in the rear and new r30 ones in the front, and lowerd it on corbra's springs. not superlows just low. and well the front didnt even change at all hight. 10mm max!. even knowing these springs are rated to 20-30mm :(. and do i overcome the fact i only have 7cm of travel in my shocks.?  

im confused

Ive got the same trouble.I converted my R30 struts to a height adjustible coilover setup and found when i lowered it to where i wanted it i would lose all my shock travel.(so now its jacked up like a landcruiser).

But i went to the susp shop for advice and he said he will replace the top mount(thick rubber housing the bearing) with a thin metal plate(my understanding) that will allow me to lower it and keep the travel. :looney:

Ive got the same trouble.I converted my R30 struts to a height adjustible coilover setup and found when i lowered it to where i wanted it i would lose all my shock travel.(so now its jacked up like a landcruiser).

But i went to the susp shop for advice and he said he will replace the top mount(thick rubber housing the bearing) with a thin metal plate(my understanding) that will allow me to lower it and keep the travel.  :looney:

Hey!!! Didn't anybody read my earlier post on lowering, #351?????

Due to the lack of travel in the damper, to lower an R30 front and rear, it is necessary to use R31 Strut inserts because they have a 42mm shorter travel and R31 rear shocks have a 32mm shorter travel in the damper.

But if you use good springs, like I have 250 lb/in front & 200 lb/in rear the travel nearly is obliterated, the springs hardly move.

My Hr30 has JIC coilovers from Japan and are physically 50mm shorter than the corresponding front or rear strut / shock assembly and the fronts have camber tops on them.

Hey guys, i have an MR30 sedan, currently installing an RB20DET, looks like a nighmare to wire up, apparently the g/box mounts should bolt up... Its bolted in, but still not wired up.

I ve painted the car in 2pak, gold and put R33 disks and 4 piston calipers on front, std rear disks, adj. coilovers, fibreglass front bar, strut brace, nolathane bushes, series 1 dr30 tail lights, 16x8 watanabe's (no rubbing problems running 245/45/16), bolton 20mm spacers and a few other things. Im sure i'll run into some problems while hooking up the RB20 tho

pictures - http://www.pbase.com/crimmo

dr30turbo - if you get 2 front struts with your HR30 from paul, they will bolt in no worries, i bought the koni shocks brand new and the springs are heavy duty pedders, all came out of my car when i converted to big brakes and coilovers, they handle very well.

Hey, Crimmo about those konies... are they red or yellow? i got those off paul but like a day after paul gave them to me they leaked oil on the ground. i wasn't sure weather to put them in or not it seemed a bit dodgey. i don't know what to do i mean are they sealed or could i get more fluid for them or something.

Hey, Crimmo about those konies... are they red or yellow? i got those off paul but like a day after paul gave them to me they leaked oil on the ground. i wasn't sure weather to put them in or not it seemed a bit dodgey. i don't know what to do i mean are they sealed or could i get more fluid for them or something.

Hey R30_Turbo, the leak is nothing to worry about, the koni insert slides into the strut case, and the koni insert itself is sealed and thats not what is leaking, all struts have a small amount of oil in the bottom of them to lubricate the shock absober insert, they are adjustable koni red's 'special' :)

Try to leave them sitting upright and they wont leak. The sleave that screws into the top may need tightening, by when they are in the car they never leak, unless you roll the car! :D

hey guys can u get aftermarket pulleys for FJ20ET's? the main crank pulley on mine i think is ok but the other 2 behind for alternator and a/c move up and down on the crank shaft heaps more than they should.

is there any like aftermarket pulleys of some sort you can get? or better to replace with originals? (ne1 got any spare? haha)

Hey Stu,

have you wired up your RB20 yet. I sat down last night and tried to figure out the RB25. and i came to a conclusion. i know nothing about EFI cars. for example what does an ECCS relay do. question is are you doing yours yourself or are you using a conversion shop. :Bang:

got it all wired up bar the rpm...

my dad knows whats goin on so hes helping me (read : doing most of it) to wire it up

what do u need to know about the 25 i may be of assistance....or hinderance.

what has everyone done in respect to cooler piping?? i mean if your using a f*ck off big frontmont then are u running the "cooler to TB" pipe over the radiator or under?

if u get what i mean? maybe not.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...