Jump to content
SAU Community

Recommended Posts

S2000 would be running in the high 14's there really would not be much seperating them. Credit to Honda they are a very highly tuned machine from factory. Unfortunately going faster really costs big $ in the Hondas. most people who modify them usually end up going backwards. I have a good friend with an integra who just by fitting a full exhaust picked up 3 kw from 7000 rpm to redline. Unfortunately under 7000 rpm he lost 5 kw all the way.

So average power from idle to redline still comes as a loss

R33 though is SO much easier to improve power on however

I'm sorry but the S2000 will be quicker on the track and on the strip relative to an R33 GTS-T...an R33 GTR on the other hand is much more of a contest :P (assuming both are stock of course)

Edited by mickey

yeah it depends on who u talk to........

if you talk to a random skyline owner.......

obviously hes gonna stick up for thier car......

same goes for hondas.......or if you ask in a honda forum............

well the thing is..........s2000 are BRUTAL for a non turbo 4 cyl........and they are reknowned for that

and on the other hand the GTS-T are really nothing to sing a song and dance about... there isnt really anything special about its performance..... for e.g the simiallar induction/CC car i can think of is the Toyota Chaser.... its also a 6cyl 2.5 with a 1JZ-GTE engine (which are reknowned to be one of the BEST inline 6's in the world) & single turbo, RWD but only comes in auto......

those things do LOW 13 SEC!!!! and i think are actually heavier than skylines.

anyhow getting back to the figures....

i think its a close call......the HOnda Runs a 176KW @ the motor stock ...and im pretty sure the GTS-T is also around 176 - 178KW @ the motor stock.....

but a BIG difference in weight there.....

and the extra Nm of torque.......on the GTS-T may or may not make up for it.

I currently own a Civic Type R, and while V-TEC Hondas are pretty quick, they achieve their power with very high rev limits, and relative to any turbo motor, they have no torque whatsoever.

The upshot of all this is, they are very quick in the right gear and at the right revs, but not as user-friendly for real-world driving and for modifying. If I wanted to run an S2000 in an R33, I'd make it a rolling start and wait till he's in 3rd or 4th and catch him on the hop lol

I currently own a Civic Type R, and while V-TEC Hondas are pretty quick, they achieve their power with very high rev limits, and relative to any turbo motor, they have no torque whatsoever.

The upshot of all this is, they are very quick in the right gear and at the right revs, but not as user-friendly for real-world driving and for modifying. If I wanted to run an S2000 in an R33, I'd make it a rolling start and wait till he's in 3rd or 4th and catch him on the hop lol

yeah i hear ya dude

ive driven a Honda Integra Type R a few years ago.....

and mate.......what a SACK OF SHIT!!!!!!!!!!!

such garbage really.....

sorry to offend honda fans......but its true.......HIGH revs is something you dont want....

some people think its a good thing but it really isnt......feels like a WORN CLUTCH!

ive driven a 200sx with a worn clutch and thats EXACTLY how the hondas felt.....

your always constantly having to gun it to the floor to even beat anything or accelerate ahead of anything

makes you eventually feel like your not running enough power to what your putting down........

anyways, i dont like V8s..and i would probably never buy one.......but id chose that over a Type R any day...

but in terms of S2000 of GTS-t...............id go the S2000......

its probably a tad quicker than the GTs-t...... but looks alot better and more original..where every tom dick and his dog has a GTS-t or GT-t or watever the GT.......

goin by http://english.auto.vl.ru/ ... and redbook.com.au

S2k = 176kw / 1260 kg (curb weight) = 139kw per tonne..

R33 183kw / 1370 (curb weight) = 133kw per tonne...

R33 has alot more torque (294nm), S2k has 208nm but it probably gets evened out with the added weight of the R33.. so stock for stock, i'd give the win to the S2K theoretically :P

im sure R33's are alot easier to gain power from compared to the S2k tho and R33's nowadays always have some kind of work done so it really would depend

Edited by shaun123

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...