Jump to content
SAU Community

Modifying The R35

SlipR35

By SlipR35,
in R35 GTR

 Share

Recommended Posts

SlipR35 Enthusiast

SlipR35

Posted
Posted

Long time reader, first time posting. Tried searching the forums but couldn't find anything specifc on whether owners of the R35's plan on doing any mods when they get them (plenty of discussions about warranty etc). If so it would be interesting to see what equipment has been purchased / what mods are going to be carried out.

Obviously there are owners who don't want to void warranty etc but there are also those of us for whom warranty is not the be all and end all. To start the ball rolling the following equipment will be installed on my car when it arrives in June:

  • 5Zigen turbo downpipes, Y pipe and Spec Tune exhaust
  • K&N air filter
  • HKS SSBOV kit
  • AP Racing two piece front and rear rotors
  • Ferodo DS1.11 brake pads
  • TR1 Stainless Steel braided brake lines
  • AccessPORT ECU
  • HKS EVC 6
  • Cobb tuning Anti sway bars
  • Eibach spring kit
  • AMS crank pulley

I've bought the car as a track car so not for daily use etc. Would be interested to see who else is going to mod their R35.

Cheers

Slip.

Link to comment
https://www.sau.com.au/forums/topic/263853-modifying-the-r35/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted

if it's a track car there are a few other things you should really consider:

1. trans and engine oil cooler upgrades. the stock cooling system will get too hot after maybe 6 laps or so. if you want to run more than that in a session, you'll need to upgrade the cooling, it's a good idea anyway.

2. paddles that move with the steering wheel (MCR carbon paddle kit). it's a bit awkward (and dangerous) needing a gear mid corner and having to take your hand off the wheel to grab a gear.

3. race seat (good to save some weight over the stock seats and of course greatly improve the on-track driving. add a harness to that too.

4. cage. this one is not so neccessary if you just want to do sprints and track days, but worth thinking about. R35s are a very fast car, and very heavy too.

I would put this gear ahead of the bov kit, evc6 and the crank pulley. also think about some track wheels and tyres too.

LSX-438 Mentor

LSX-438

Posted
Posted

I need to keep my car within CAMS 2D specs for NSW club based Sprints, so mods will be relatively lightweight.

1. Tyres (295 RE55's all round) on 18" Enkei 18x10's

2. Midpipe

3. Willall tranny fluid and possibly cooler

4. Harness bar + harness

5. AP front rotors and uprated pads + fluid

Unfortunately i need to run the factory tune on the circuit (2D rules).

I might try the AccessPort for the street, strip and valet mode though.

SlipR35 Enthusiast

SlipR35

Posted
  • Author
Posted (edited)

Thanks Beer Baron,

I have a new set of Recaro's for the vehicle already and am looking into the cage side of things to see who can do one. I agree with your comments re the paddles, I have the MCR ones on order from the States but am waiting to receive them.

I saw that Willall Racing do the transmission intercooler upgrade, I'll have a chat to them about the oil cooler upgrade as well and get them to do both at the same time if this can be sourced.

Cheers

Slip.

Edited by SlipR35
Beer Baron Grand Master

Beer Baron

Posted
Posted
Thanks Beer Baron,

I have a new set of Recaro's for the vehicle already and am looking into the cage side of things to see who can do one. I agree with your comments re the paddles, I have the MCR ones on order from the States but am waiting to receive them.

I saw that Willall Racing do the transmission intercooler upgrade, I'll have a chat to them about the oil cooler upgrade as well and get them to do both at the same time if this can be sourced.

Cheers

Slip.

have a look at giant's R35. he had a lovely cage built for that. i drove it at oran park gp on the weekend and it was lovely to drive. very easy to steer on the throttle and even though the chassis is pretty good to start with the cage does help, and of course adds to the safety. his has been retuned too with more boost etc and runs very nicely. the only thing you need to do is keep one eye on temps of trans and engine oil.

the biggest improver to driving feel would be:

seat and harness

wheel and moveable paddles

those things transform the way you can drive the car.

sewid Grand Master

sewid

Posted
Posted
Long time reader, first time posting. Tried searching the forums but couldn't find anything specifc on whether owners of the R35's plan on doing any mods when they get them (plenty of discussions about warranty etc). If so it would be interesting to see what equipment has been purchased / what mods are going to be carried out.

Obviously there are owners who don't want to void warranty etc but there are also those of us for whom warranty is not the be all and end all. To start the ball rolling the following equipment will be installed on my car when it arrives in June:

  • 5Zigen turbo downpipes, Y pipe and Spec Tune exhaust
  • K&N air filter
  • HKS SSBOV kit
  • AP Racing two piece front and rear rotors
  • Ferodo DS1.11 brake pads
  • TR1 Stainless Steel braided brake lines
  • AccessPORT ECU
  • HKS EVC 6
  • Cobb tuning Anti sway bars
  • Eibach spring kit
  • AMS crank pulley

I've bought the car as a track car so not for daily use etc. Would be interested to see who else is going to mod their R35.

Cheers

Slip.

First mods should be a Y-Pipe and the Cobb ECU and probably a boost controller because even with the latest maps some people complain about issues with Cobb's boost control. The next best value for money mod is the wastegate actuators swap.

Your Australian spec GT-R will have stiffened brake lines anyway, not sure brake lines are needed. Brake pads and some aftermarket slotted rotors for is all you need for the brakes.

BOVs? Why would you bother... Unless you're already buying the GT570 kit which comes with them there's no reason to go out and buy these on purpose.

With the seriesII suspension, spring kits aren't really doing anything for you unless you just want to lower it and already standard ride height is low. They weren't designed with the series II suspension in mind. See what comes out over the next few months in terms of springs but probably not worth doing.

Crank pulley? I wouldn't.

K&N Filters? Probably fine to replace the stock ones after the run in period with these but dont expect any gains.

Majanal Grand Master

Majanal

Posted
Posted

Might be the wrong place to ask, and forgive me for asking a question that has probably already been covered, but does anyone know if the R35 can be switched to rear wheel drive only easily?

I was sure that it was said somewhere before but bugger me if I can find it.???

Cheers.

Snowman Grand Master

Snowman

Posted
Posted

Well anyone interested in getting a Cobb should know we can now do a custom tune for them :sick:

The base tunes with the units are only designed for 96RON fuel so they'll work ok but could be improved. But we got the full Cobb Pro tuning software during the week.

Like others have said I reckon a Cobb + Midpipe is about where you'd want to be at if you are keen on modding your R35 as the most sensible place to start.

Oh - and rotors/pads. That way you can put your stock ones back on before you go back to Nissan in "new" condition and not be flogged with a $10K replacement.

sewid Grand Master

sewid

Posted
Posted
Might be the wrong place to ask, and forgive me for asking a question that has probably already been covered, but does anyone know if the R35 can be switched to rear wheel drive only easily?

I was sure that it was said somewhere before but bugger me if I can find it.???

Cheers.

You drop the return driveshaft from the transfer case.

It's not a simple fuse pull.

Snowman Grand Master

Snowman

Posted
Posted

The Supercar Club guys came around with their new Gunmetal JDM GT-R tonight care of Beer Baron and we did a quick Cobb treatment on it to get rid of the speed limitter before it goes to Phillip Island tomorrow. Good little toy those Cobbs.

We also had a Willall Midpipe which we put on tonight and as a free pulg to Martin here it was a beautiful fit, made a HUGE improvement to external noise but internally (at least with the windows up) there was bugger all marked difference in noise and had no noticable drone on either the freeway or around the normal streets. The only real time you could hear the difference from behind the wheel was on the big down-shifts as then you could really hear the bark. Although driving with the windows down you can definitely hear it.

But thumbs up for a great mod to get. Easy to install (took 15mins on my gargage floor) and for the $$$ I can see no reason why you'd get a more expensive Jap one. And its definitely a major improvent over the stock system.

LSX-438 Mentor

LSX-438

Posted
Posted
Well anyone interested in getting a Cobb should know we can now do a custom tune for them :banana:

The base tunes with the units are only designed for 96RON fuel so they'll work ok but could be improved. But we got the full Cobb Pro tuning software during the week.

Like others have said I reckon a Cobb + Midpipe is about where you'd want to be at if you are keen on modding your R35 as the most sensible place to start.

Oh - and rotors/pads. That way you can put your stock ones back on before you go back to Nissan in "new" condition and not be flogged with a $10K replacement.

Do you sell the Cobb tuner itself and is it in stock? If so could you PM me a price? Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...