Jump to content
SAU Community

Recommended Posts

All R34s have 5 stud hubs.

not true r34 non turbo, apart from gtv are 4 stud

cant beleive no one said get a gtv, wack some coil overs in it set to a good performance height (not slammed), then when your off your p's get a gtt front cut and transfer the turbo engine in, problem solved :(

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

After owning/driving both I would choose the supra. I found the supra more comfortable to drive with only 2 people. If your even thinking of having 4 people in the car then get an R34. Supra is less practical than the R34 and for your price range most likely older aswell. But to me the looks interior/exterior and performance more than make up for these cons.

The R34 N/A isn't a bad car, it handles well and looks nice but IMO the supra is the better overall car.

ps. The 96.5+ supras have a much nicer looking dash, oh and whichever car you choose it must be manual :P

Edited by eddieneedsboost

Ive driven both and actually own a series II 96 JZA80 SZ-R with the factory getrag 6 speed box (very rare). Only minor mods i.e Buddy Club Fully adjustable coilovers, cat 2.5in back zaust, BBS rims with 265s on the back and still breaks traction (factory LSD) w/ 3.75 gears? I think lol, plus the best part about the SZ-R is the box, for those who know about the v160 getrag they are awsome (same as TT variant). They are very comfortable, but handle like a gokart when you wind the stiffness right up. In wa they arent very common which is also nice. Interior is different on series I and II, only little stuff though. Best part if you ever go turbo and have the six speed SZ-R its an easy swap and you dont have to worry about have a much much much weaker W58 box behind it.

That all being said, the back seat is really cramped, almost no point in having it. With that in mind the supra is a real drivers car, perfect on both the track and on the street, great styling and not to mention fuel consumption is great on a full tank depending on how you drive it I get 550+ kms out of it, but you will want to drive it all the time, the interior really does seem like that of a fighter jet.

Im not being biased here, Im actually a big skyline fan and like them more than the Supras.

Mines up for sale, only because I want a drift car :P you wont fault these cars, the 2JZGE is an awsome motor. Mines going for 14,500. Much cheaper than a man n/a 34.

Well, I went and sat in both in the flesh today, and the guy took me out in both, and it's safe to say I'm sold...

On the Supra.

I must've looked at a really ratty Supra in the past, because this one's interior wasn't all that bad. I loved the look (exterior) and for an NA they have boatloads of torque. I was honestly impressed.

Backseats still suck, but to be honest the 34 isn't much better, and I highly doubt I'll have more than 2 (occasionally 3) people in the car, and the third can sit behind the passenger.

Is it still cool for me to wear an SAU badge, or do I have to go find another forum now?

Thanks for all the input guys.

not true r34 non turbo, apart from gtv are 4 stud

cant beleive no one said get a gtv, wack some coil overs in it set to a good performance height (not slammed), then when your off your p's get a gtt front cut and transfer the turbo engine in, problem solved :blush:

All R34s from the pov pack 2L to the GT-R have 5 studs... I got the official Japanese brochure.


  1. Well, I went and sat in both in the flesh today, and the guy took me out in both, and it's safe to say I'm sold...

    On the Supra.

    I must've looked at a really ratty Supra in the past, because this one's interior wasn't all that bad. I loved the look (exterior) and for an NA they have boatloads of torque. I was honestly impressed.

    Backseats still suck, but to be honest the 34 isn't much better, and I highly doubt I'll have more than 2 (occasionally 3) people in the car, and the third can sit behind the passenger.

    Is it still cool for me to wear an SAU badge, or do I have to go find another forum now?

    Thanks for all the input guys.

    SAU is open to all cars.

Well, I went and sat in both in the flesh today, and the guy took me out in both, and it's safe to say I'm sold...

On the Supra.

I must've looked at a really ratty Supra in the past, because this one's interior wasn't all that bad. I loved the look (exterior) and for an NA they have boatloads of torque. I was honestly impressed.

Backseats still suck, but to be honest the 34 isn't much better, and I highly doubt I'll have more than 2 (occasionally 3) people in the car, and the third can sit behind the passenger.

Is it still cool for me to wear an SAU badge, or do I have to go find another forum now?

Thanks for all the input guys.

If you are going to do anything to it or would like any information check out the Supra forums, they are a great club, much like SAU.

Was going to say, Supra interior and exterior isnt that bad, if i could have i would have gone a N/A Supra over my R33, but price was to different for me.

Goodluck, hope you're happy with the choice :cool:

if you are going toyota, check out toymods.net, heaps of awesome tech info too.

toyota and nissan both make fantastic cars, i enjoy driving my GTR and the supra for different reasons, they're both great in different ways, different feel, different power delivery, different handling... but both great

so yeah im sure you will enjoy whatever way you go. the supra was designed to be the lightest, fastest and best handling car in toyota's arsenal ever... and im sure none of you need convincing of the skyline goodness

and then, stick a 1UZ V8 in the supra... check out v-eight.com. 307rwkW @ 9300rpm sounds great :D

If you are thinking at all about performance, make sure you know how to drive properly first. I've seen guys in supras/skylines talk how up how fast their car can go, only to see that they cant drive it eg: 1 second+ delay between changing gears and either high rev launches or stalling.

If you are thinking at all about performance, make sure you know how to drive properly first. I've seen guys in supras/skylines talk how up how fast their car can go, only to see that they cant drive it eg: 1 second+ delay between changing gears and either high rev launches or stalling.

Heh, I'm not a show off, and I honestly don't care about performance in an NA (so long as it has some zip).

The most I'll do is a squirt here or there to reach the speed limit.

If you are thinking at all about performance, make sure you know how to drive properly first. I've seen guys in supras/skylines talk how up how fast their car can go, only to see that they cant drive it eg: 1 second+ delay between changing gears and either high rev launches or stalling.

HAHA SO TRUE.

Edited by bozodos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...