Jump to content
SAU Community

Recommended Posts

only off the shelf coilovers i would consider are DMS :)

Grab some bilsteins or go to top-performance in trade place vermont, get some koni yellows valved to match some custom springs from brown springs in thomastown(260 for the SET), some swaybars, a good diff or locker if your short on cash, and go from there...

cheap suspension feels cheap(not commenting on ISC)

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

then i might go for the ISC as im not FULL on doing racing on the track... I would now and then do a little bit of driftinggg .

What do you guys think of the Tien HA's? theres this guy selling them for 1k second hand.... he said there all in good condition.

Thanks guys.

Edited by geraus

honestly, do it right once and you won't regret it. Spend the $$ now and you won't have any headaches in the future. Greddy Type S's are only 2k or so and they have a spring rate of 8k Front 6k Rear. 32 way adjustable. good coilovers.

msg ssXricho he just got a set put into his car, and he's loving them. he does track days also.

Perfect for track and street.

just my 2cents.

honestly, do it right once and you won't regret it. Spend the $ now and you won't have any headaches in the future. Greddy Type S's are only 2k or so and they have a spring rate of 8k Front 6k Rear. 32 way adjustable. good coilovers.

msg ssXricho he just got a set put into his car, and he's loving them. he does track days also.

Perfect for track and street.

just my 2cents.

i run these and am very happy with them for a daily that occasionally sees the track.

only off the shelf coilovers i would consider are DMS :banana:

+1

Grab some bilsteins or go to top-performance in trade place vermont, get some koni yellows valved to match some custom spring, some swaybars, a good diff or locker if your short on cash, and go from there...

+2

cheap suspension feels cheap

+3

Funny how people just want 'coilover', and the only reason they ask is for approval, but when they don't get it they just ignore it anyway...

Seriously geraus... If you don't have $3k to spend on coilovers DON'T BOTHER!

Get yourself some Bilstein or Koni Shocks and springs, the ONLY thing that changes a normal skyline coilover (which they come with standard) from an aftermarket 'coilover' is the adjustable platforms, which has absolutely no benefit to drifting what so ever... Listen to the people here who have given the good advice, because for a change there's actually been a fair bit of it here.

then i might go for the ISC as im not FULL on doing racing on the track... I would now and then do a little bit of driftinggg .

What do you guys think of the Tien HA's? theres this guy selling them for 1k second hand.... he said there all in good condition.

Thanks guys.

tein HAs, are entry level, twin tube cheap coil-overs. they are pretty average. and yes I've used them years ago (i don't think they still make them new anymore). I bought some brand new and thought they were awesome. but in 10 years I've learnt a lot....

How often are you going to be doing drifting? If not much dont go spending a ridiculous amount on something with heaps of potential that only gets used once every two months or so.

I got some TEIN superstreets with adjustable camber arms/toes for 2.6k which are really suppoed to perform out on the track, I would recommend those but each to their own.

How often are you going to be doing drifting? If not much dont go spending a ridiculous amount on something with heaps of potential that only gets used once every two months or so.

I got some TEIN superstreets with adjustable camber arms/toes for 2.6k which are really suppoed to perform out on the track, I would recommend those but each to their own.

I have run bilsteins in all of my street cars except one which had koni's... good suspension/tyres/brakes is used every day, and can potentially save your life.

The wife has Tein Super Streets and they are perfect for every day driving. Very comfortable but stiffer than my King standard lows with KYB shocks. I haven't heard anybody mention a good set of sway-bars, will give you the best of both worlds. My car has softer suspension with sway-bars set to medium on front and stiff on rear. Combined with urethane bushes and proper castor it is simply brilliant at wakefield or very comfy on the street. There is no body roll to think of and extremely predictable for sliding at speed.

The wife's car only has the Teins and nothing else but almost as good as mine. We have adjusted her shocks where they are perfect for the spring rates on them. I can only imagine how good hers would be with my sway-bars and bushes.

im in love with my HKS hipermax Drift coils

and i use my car on the street and as well have some fun on the tracks... the set up is perfect for getting that back end out and controlling it =)

sway's, camber and pineapples

+1 my car felt stiffer with coilovers but wasnt massive improvement.

car felt massive difference once i threw in swaybars/subframe bushes/castor/camber/toe arms and got a proper alignment,

can say my r33 handles like no other r33 ive been in.

if your into drifting, rather then spend the 3-5k everyone else is talking about just get some cheap stiff coilovers and get yourself a 2way diff.

old 14 year old diff is more likely to get u into an accident.

+ 1 on both counts tets...

my 33 has 5/7 greddy's, sways, struts, pineapples, castor, camber, hicas lock and mech diff and it handls amazingly well for what i have spent.

also on the drift front i agree... the SR20 ke70 i'm building atm is getting a welded diff & cheapo coilovers with nasty high spring rates.... but i will be doing pineapples, sways, struts &camber too... just deciding on whether to cage or not

+ 1 on both counts tets...

my 33 has 5/7 greddy's, sways, struts, pineapples, castor, camber, hicas lock and mech diff and it handls amazingly well for what i have spent.

also on the drift front i agree... the SR20 ke70 i'm building atm is getting a welded diff & cheapo coilovers with nasty high spring rates.... but i will be doing pineapples, sways, struts &camber too... just deciding on whether to cage or not

Go with the cage. If we're talking about handling nothing stiffens a chassis more than a roll cage. Many years ago I had a 56 Chevy, yes I know they don't handle, but when the cage went in it was a transformation, well as good a a 2 tonne car can be transformed.

yeah, i'm leaning towards a full cage... weld in

but how much is a full cage for a ke70? not cheap :down:

as far as good coilovers in a drift car is concerned... yes you do need grip, but most people's drift cops are built on the cheap, and i think you'd be better off with cheap coils, sways, pineapples, castor and camber, than just a set of good coils and stock everything else :P

yeah, i'm leaning towards a full cage... weld in

but how much is a full cage for a ke70? not cheap :down:

as far as good coilovers in a drift car is concerned... yes you do need grip, but most people's drift cops are built on the cheap, and i think you'd be better off with cheap coils, sways, pineapples, castor and camber, than just a set of good coils and stock everything else :P

cheap builds get nowhere, it depends what u want. if u wanna go skid out in the industrials then great, if u wanna be door to door with another car in competition then thats another.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...